Show sidebar
Show 24 48 64
Filters
Electrocompaniet ECI 6 DX MKII
Electrocompaniet ECI 6 DX MKII
Add to compare
Quick view
Add to wishlist

Electrocompaniet ECI 6 DX MKII

,
€7,180.00
Προσθήκη στο καλάθι

Electrocompaniet ECI 6 DX MKII

Ο Electrocompaniet ECI 6 DX MKII είναι ένας ολοκληρωμένος ενισχυτής με ενσωματωμένο streamer και DAC που μπορεί να "στριμάρει" μουσική από όλες τις δημοφιλείς υπηρεσίες Streaming. Ο Electrocompaniet ECI 6 DX MKII είναι και ένα μηχάνημα με όλα τα τυπικά χαρακτηριστικά της Electrocompaniet π.χ έχει Maximum peak current πλέον των 100A διαθέτει 125 W στα 8 ohms ανα κανάλι τα οποία γίνονται 200 και 370!! στα 4 και στα 2 ohms αντίστοιχα. Έχει ισσοροπημένες και rca εισόδους όπως και εξόδους και επιπλέον έχει USB, 2 Toslink, 2 Coaxial, είσοδο Lan, usb &  wi-fi ενώ το κομμάτι του ψηφιοαναλογικού μετατροπέα είναι στα 24 bit/192 kHz με το γνωστό γλυκόηχο χαρακτήρα των ψηφιακών της εταιρείας.
Electrocompaniet ECI 6 DX MKII

Electrocompaniet ECI 6 DX MKII

Musical Fidelity M8xi
Add to compare
Quick view
Add to wishlist

Musical Fidelity M8xi

,
€7,250.00
Προσθήκη στο καλάθι

Musical Fidelity M8xi

Το 1990, η Musical Fidelity δημιούργησε τον πρώτο Super Integrated ενισχυτή: τον A1000. Έτυχε ενθουσιώδους υποδοχής και, ακόμη και σήμερα, σαν μεταχειρισμένος, πωλείται σε υψηλές τιμές. Ο A1000 ήταν ο πρώτος από μια μακρά σειρά Super Integrated ενισχυτών της Musical Fidelity. Τα παιδιά του: τα NuVista M3, Tri Vista 300, kW500, M6/500i, NuVista 800 και NuVista 600 έγιναν δεκτά με εξίσου ενθουσιασμό στον κόσμο των audiophiles. Ο M8xi είναι ο πιο πρόσφατος και ο καλύτερος της νέας σειράς.

Γενική περιγραφή Το M8xi είναι ουσιαστικά 3 μηχανήματα σε ένα κουτί, ξεχωριστός προενισχυτής με δύο μονομπλόκ τελικούς ενισχυτές ισχύος. Η ο προενισχυτής και οι τελικοί έχουν ο καθένας τις δικές του ψύκτρες και τον δικό τους μετασχηματιστή. Ο M8xi είναι μια καθαρή dual mono σχεδίαση. Ο προενισχυτής έχει το δικό του ξεχωριστό τροφοδοτικό και είναι τοποθετημένος κοντά στις υποδοχές εισόδου. Κατά συνέπεια, οι πλακέτες είναι πολύ μικρές και η διαδρομή του σήματος πολύ σύντομη. Αυτή η σχεδίαση διασφαλίζει ότι τα σήματα και των δύο καναλιών έχουν εξαιρετικά χαμηλή σύνθετη αντίσταση τη στιγμή που εισέρχονται στον ενισχυτή. Αυτή είναι μια σημαντική λεπτομέρεια. Κάθε κανάλι έχει δώδεκα μεγάλα bipolar τρανζίστορ - κάτι που εξασφαλίζει 200 αμπέρ ρεύμα κορυφής ανα πάσα στιγμή. Η δουλειά του κουτιού είναι υψηλής ποιότητας ενώ η πρόσοψη του M8xi είναι από αλουμίνιο milspec. Οι ψύκτρες του ενισχυτή έχουν εξαιρετικά χαρακτηριστικά απαγωγής και φινίρισμα και γενικά όλη η κατασκευή του M8xi δίνει μια αίσθηση στιβαρότητας και ποιότητας.

Musical Fidelity M8xi

Musical Fidelity M8xi

Leben CS-600X
Add to compare
Quick view
Add to wishlist

Leben CS-600X

,
€7,350.00
Προσθήκη στο καλάθι

Leben CS-600X

Leben CS-600X

Leben CS-600X

CAYIN SOUL 170i
Add to compare
Quick view
Add to wishlist

CAYIN SOUL 170i

,
€7,800.00
Προσθήκη στο καλάθι

CAYIN SOUL 170i

CAYIN SOUL 170i

CAYIN SOUL 170i

BRYSTON B135³
Add to compare
Quick view
Add to wishlist

BRYSTON B135³

,
€8,690.00
Προσθήκη στο καλάθι

BRYSTON B135³

BRYSTON B135³

BRYSTON B135³

CAYIN A-845Pro
Add to compare
Quick view
Add to wishlist

CAYIN A-845Pro

,
€8,900.00
Προσθήκη στο καλάθι

CAYIN A-845Pro

CAYIN A-845Pro

CAYIN A-845Pro

JADIS I35
Add to compare
Quick view
Add to wishlist

JADIS I35

,
€9,550.00 – €10,100.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

JADIS I35

JADIS I35

JADIS I35

-17%
GRANDINOTE SHINAI
Add to compare
Quick view
Add to wishlist

GRANDINOTE SHINAI

,
Original price was: €11,990.00.Η τρέχουσα τιμή είναι: €9,900.00.
Προσθήκη στο καλάθι
GRANDINOTE SHINAI
SHINAI MAGNETOSOLID AMPLIFIER a FERRARI among Amplifiers !!
MAGNETOSOLID AMPLIFIERS = Τransistor υλοποιημένα σε σχέδιο λυχνιών Ήχος σαν Single-Ended DHT Triode αλλά με άφθονη δύναμη & χωρίς τα μειονεκτήματα των λυχνιών.  Διθυραμβικές κριτικές στον διεθνή τύπο.  Σε μια κατηγορία από μόνος του. Μεγαλύτερο damping factor, μεγαλύτερη ζώνη συχνοτήτων, μηδενική ανάδραση. Αξεπέραστη ποιότητα πραγματικά φυσικού ήχου με τρισδιάστατη παρουσία. Με 2 χ 37 Watt RMS σε πληρη Ταξη Α` που ακούγονται σαν 200 Watt !! Οδηγεί άνετα ηχεία 85 db / 4 Ω ! Μοναδική απόδοση με τα ηχεία της GRANDINOTE.
GRANDINOTE SHINAI

GRANDINOTE SHINAI

 
Marantz PM-10 Reference Marantz PM-10 Reference Integrated Stereo Amplifier with 200W and Custom HDAM This reference stereo integrated amplifier is the product of expertise developed over decades of research, testing, and critical listening for the best possible reproduction of music. Classic Design 2.2 Channels 200 Watts Per Channel Custom HDAM 5 Year Warranty
Add to compare
Quick view
Add to wishlist

Marantz PM-10 Reference

,
€9,999.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Marantz PM-10 Reference

Marantz PM-10 ReferenceMarantz PM-10 Reference Integrated Stereo Amplifier with 200W and Custom HDAM This reference stereo integrated amplifier is the product of expertise developed over decades of research, testing, and critical listening for the best possible reproduction of music. Classic Design 2.2 Channels 200 Watts Per Channel Custom HDAM 5 Year Warranty

Marantz PM-10 Reference

REGA OSIRIS
Add to compare
Quick view
Add to wishlist

REGA OSIRIS  

,
€10,390.00
Προσθήκη στο καλάθι

REGA OSIRIS

Ο REGA OSIRIS είναι το αποκορύφωμα 32 ετών εμπειρίας στην ανάπτυξη solid-state ενισχυτών. Ένας ενισχυτής χωρίς συμβιβασμούς, με μεγάλη ισχύ, 162 W σε 8 Ω/ 250 W, 4 Ω, dual mono design σε κουτί αλουμινίου με επεξεργασία από την Rega - CNC. Ο REGA OSIRIS είναι ο κορυφαίος ενισχυτής της εταιρείας. Ένα ενισχυτικό με μίνιμαλ σχεδίαση υψηλού κέρδους παθητική προενίσχυση και παθητικό έλεγχο έντασης με ένα μόνο στάδιο ενίσχυσης ισχύος μεταξύ της εισόδου και ηχείων, ο Osiris προσφέρει κορυφαία απόδοση και ποιότητα κατασκευής. Ο REGA OSIRIS REF έχει σχεδιαστεί ως το τέλειο ματσάρισμα για την υπόλοιπη σειρά αναφοράς, όπως τα Isis CDP, Valve Isis CDP και Aura MC phono stage.

REGA OSIRIS

REGA OSIRIS

Thivanlabs Silver 211 SE V 23
Add to compare
Quick view
Add to wishlist

Thivanlabs Silver 211 SE V 23

,
€11,000.00
Προσθήκη στο καλάθι

Thivanlabs Silver 211 SE V 23

Ολοκληρωμένος ενισχυτής λυχνίας σε τάξη Α Single-ended με δυο 211 και 55W ανά κανάλι και τηλεχειρισμό. Ο ενισχυτής είναι σε 3 κομμάτια, ένα drive stage και δυο power stages ένας ενισχυτής που τα έχει όλα ισχύ και την μουσικότητα της Single-ended λάμπας...
Thivanlabs Silver 211 SE V 23

Thivanlabs Silver 211 SE V 23

JADIS DA-50 Signature
Add to compare
Quick view
Add to wishlist

JADIS DA-50 Signature

,
€11,590.00 – €12,140.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

JADIS DA-50 Signature

JADIS DA-50 Signature

JADIS DA-50 Signature

Musical Fidelity Nu-Vista 800.2
Musical Fidelity Nu-Vista 800.2
Add to compare
Quick view
Add to wishlist

Musical Fidelity Nu-Vista 800.2

,
€12,400.00
Προσθήκη στο καλάθι

Musical Fidelity Nu-Vista 800.2

Ο Nu-Vista 800 ήταν ένας ένας ολοκληρωμένος ενισχυτής ο οποίος πήρε πολύ μεγάλη αναγνώριση από κοινό και κριτικούς. Δυστυχώς πολλά από τα αρχικά υλικά που χρησιμοποιούνταν στο κύκλωμα του σταμάτησαν να υπάρχουν στην αγορά π.χ το ορίτζιναλ ρετρό display του σταμάτησε να παράγεται!! Ετσι η εταιρεία έμεινε με τις εξής δυο επιλογές είτε να σταματήσει ένα άκρως εμπορικό και αγαπημένο μηχάνημα στην αγορά ή αντικαταστήσει αναβαθμίζοντας το παλιό μοντέλο. Η Musical Fidelity κατέληξε στην δεύτερη επιλογή και έτσι δημιουργήθηκε ο .2 πιστός στην αρχική φόρμουλα όσο ήταν δυνατό.

Musical Fidelity Nu-Vista 800.2 In Brief A work of audio art using our incredible Nu-Vista circuitry with 300WPC+ Redesigned front panel with new display Rewound transformer for less noise Revised power supply circuits Remote on/standby Locally decoupled output stage taken from the TITAN power amp Total stability margin, will drive any loudspeaker with ease Cutting edge technical performance with the magic of Nu-Vistors Dual mono power amps with separate preamp Five versatile inputs - Balanced XLR, CD, Tuner, 2 x Auxiliary Both fixed line and variable pre outputs Home Theatre bypass Superb design, Heroic build quality

Musical Fidelity Nu-Vista 800.2

Musical Fidelity Nu-Vista 800.2

Audio Note Meishu Tonmeister Line As with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.
Add to compare
Quick view
Add to wishlist

Audio Note MEISHU TONMEISTER 300B SE Line

,
€12,470.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Audio NOTE MEISHU TONMEISTER  300B SE Line

Audio Note Meishu Tonmeister LineAs with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.

Audio Note Meishu Tonmeister Line Single Ended class A integraed tube amp with 300b

Thivanlabs Silver 845 SE V 23
Add to compare
Quick view
Add to wishlist

Thivanlabs Silver 845 SE V 23

,
€12,500.00
Προσθήκη στο καλάθι

Thivanlabs Silver 845 SE V 23

Ολοκληρωμένος ενισχυτής λυχνίας σε τάξη Α Single-ended με δυο 845 και 70W ανά κανάλι και τηλεχειρισμό. Ο ενισχυτής είναι σε 3 κομμάτια, ένα drive stage και δυο power stages ένας ενισχυτής που τα έχει όλα ισχύ και την μαγεία της Single-ended λάμπας...
Thivanlabs Silver 845 SE V 23

Thivanlabs Silver 845 SE V 23

Jadis I50
Add to compare
Quick view
Add to wishlist

JADIS I50

,
€12,770.00
Προσθήκη στο καλάθι

JADIS I50

Jadis I50

Jadis I50

Emillé Labs KI-270W
Add to compare
Quick view
Add to wishlist

Emillé Labs KI-270W

,
€12,880.00
Προσθήκη στο καλάθι

Emillé Labs KI-270W

Emillé Labs KI-270W, ένας εξαιρετικός ολοκληρωμένος ενισχυτής από την EMILLE.  O KI-270W διαθέτει περίσσεια ρεύματος με τα 2x70 Watt στα 8/4ohm. Σε τοπολογία Push-Pull με 2 λυχνίες εξόδου 6550 ανά κανάλι ο ενισχυτής είναι ικανός να οδηγήσει ακόμα και δύσκολα ηχεία. Επιπλέον ο Emille KI-270W δέχεται και λυχνίες εξόδου KT-120 αυξάνοντας την ισχύ του στα 2x90 Watt.

Ο Emille KI-270W διαθέτει εξωτερική ρύθμιση ΒΙΑS με τα όργανα να βρίσκονται στο μπροστινό πάνελ. Ο ενισχυτής έχει μοναδική ποιότητα κατασκευής και design και φιλοξενείτε σε ένα εξαιρετικό case αλουμινίου με πολύ υψηλό WAF, ενώ η μελετημένη κατασκευή του case βοηθά τον EMILLE να δουλεύει σε πολύ χαμηλές θερμοκρασίες χωρίς μεταβολή της απόδοσης του για πολλές ώρες λειτουργίας. Ο KI-270W ξεπερνάει σε απόδοση πολλά σετ προ-τελικών υπερδιπλάσιας άξιας. Έχει χειροποίητους μετασχηματιστές έξοδου με πυρήνα Μ-6, είναι dual-mono κατασκευή και διαθέτει ένα ιδανικό Phase –Splitter. Όλα αυτά ανεβάζουν κάθετα την ποιότητα ήχου κάνοντας τον KI-270W να συναγωνίζεται άμεσα τους Single-Ended ενισχυτές στην φυσικότητα στα μεσαία, χωρίς να έχει τα ελαττώματα τους στα άκρα του ηχητικού φάσματος και την ανεπαρκή οδήγηση των ηχείων. Η ποιότητα ήχου του είναι φυσική και γραμμική από το πρώτο 0,1 Watt έως την μέγιστη ισχύ του.
Emillé Labs KI-270W

Emillé Labs KI-270W

-10%
GRANDINOTE Solo Integrated We are proud to introduce a new product that is the result of a long period of design and development. The new integrated amplifier Solo. We have concentrated years of experience in HiFi development into this new creation. Everything is improved not only the audio quality and the power (now 60W in class A) but even a new design with a huge 9” display full of functions like VUmeter, spectrum analyser and more. Grandinote is technology, innovation, flexibility, design and absolute audio quality. MAGNETOSOLID TECHNOLOGY Magnetosolid is a unique technology from Grandinote, designed by engineer Massimiliano Magri and a great expression of Made in Italy. Created in 2002 in its first versions, it integrates two words in its name: Magneto and Solid. Magneto because of its ferromagnetic components and output transformers and Solid because of its solid-state components. It is a circuit that brings the best of tubes and solid-state technology to our amplifiers. As with tube systems, the circuit is as simple and straightforward as possible, but with all the qualities of solid state. The main advantage of tubes over solid state, is the absence of parasitic capacitance. Our Magnetosolid technology, has overcome even this obstacle by delivering a sound that is absolutely faithful to the source without the loss of any detail and with the ability to control any speaker. The frequency response of Magnetosolid amplifiers is the best on the market, superior to either tube or solid-state systems. All components of the sound message are in place. Detail, presence, full dynamic and control thanks also to an absolute reference damping factor. In the Solo and in the new Grandinote Magnetosolid amplifiers the audio circuit has been further improved compared to previous ones such as the Shinai, with voltages and polarizations even richer and oversized. An increase of over 50% going from 60V to 96V while maintaining the purity of the signal unchanged. POWER SUPPLY Grandinote's new Magnetosolid amplifiers are now equipped with a new switching power supply with electro-medical rigor standards and a new concept. All circuits are pure class A with an always constant current. The absorption does not depend on the signal and this means that the power supply will always supply the same current. It is very important to underline that our switching power supplies never modulate the current based on the signal. The development of our new switching power supplies has broken down the paradigm of toroidal as the only solution. With our design they are now qualitatively on par with toroidals and perfectly integrated with Grandinote's Magnetosolid circuits in pure class A. With our new power supply, we are able to choose the supply voltages for the output stages and able to select the Solo polarization in function of the nominal impedance speakers. Solo is now optimised for 8, or 4 Ohm speakers, avoiding unnecessary power losses and with a greater overall performance. We have also increased the size of the heatsinks, now they are a 10% bigger than in the old Shinai and that allows the Solo to deliver more power while heating up less and be more comfortable to use in hot seasons. VOLUME CONTROL Now we have resistors combined with reed relays. Reed relays are the best contact in existence cause they works in vacuum, no impurities, no parasitic capacitances like in solid-state relays and guarantee the passage of every smallest nuance of the signal, without limiting its frequency response, without any distortion! The configuration of these resistors is a pure “ladder" with two blocks of resistors, only in parallel with each other. This configuration use the same principle of the volume regulators with rotary switches, studded with resistors, but with 2 big improvements: No rotary switch in the world has the same contact quality as a reed relay (vacuum) - these switches have few steps, a far cry from the 68 steps + 0 of our regulator. The Shinai has only 33 steps plus 0.
Add to compare
Quick view
Add to wishlist

GRANDINOTE Solo Integrated

,
Original price was: €14,400.00.Η τρέχουσα τιμή είναι: €12,960.00.
Προσθήκη στο καλάθι

GRANDINOTE Solo Integrated

GRANDINOTE Solo Integrated We are proud to introduce a new product that is the result of a long period of design and development. The new integrated amplifier Solo. We have concentrated years of experience in HiFi development into this new creation. Everything is improved not only the audio quality and the power (now 60W in class A) but even a new design with a huge 9” display full of functions like VUmeter, spectrum analyser and more. Grandinote is technology, innovation, flexibility, design and absolute audio quality. MAGNETOSOLID TECHNOLOGY Magnetosolid is a unique technology from Grandinote, designed by engineer Massimiliano Magri and a great expression of Made in Italy. Created in 2002 in its first versions, it integrates two words in its name: Magneto and Solid. Magneto because of its ferromagnetic components and output transformers and Solid because of its solid-state components. It is a circuit that brings the best of tubes and solid-state technology to our amplifiers. As with tube systems, the circuit is as simple and straightforward as possible, but with all the qualities of solid state. The main advantage of tubes over solid state, is the absence of parasitic capacitance. Our Magnetosolid technology, has overcome even this obstacle by delivering a sound that is absolutely faithful to the source without the loss of any detail and with the ability to control any speaker. The frequency response of Magnetosolid amplifiers is the best on the market, superior to either tube or solid-state systems. All components of the sound message are in place. Detail, presence, full dynamic and control thanks also to an absolute reference damping factor. In the Solo and in the new Grandinote Magnetosolid amplifiers the audio circuit has been further improved compared to previous ones such as the Shinai, with voltages and polarizations even richer and oversized. An increase of over 50% going from 60V to 96V while maintaining the purity of the signal unchanged. POWER SUPPLY Grandinote's new Magnetosolid amplifiers are now equipped with a new switching power supply with electro-medical rigor standards and a new concept. All circuits are pure class A with an always constant current. The absorption does not depend on the signal and this means that the power supply will always supply the same current. It is very important to underline that our switching power supplies never modulate the current based on the signal. The development of our new switching power supplies has broken down the paradigm of toroidal as the only solution. With our design they are now qualitatively on par with toroidals and perfectly integrated with Grandinote's Magnetosolid circuits in pure class A. With our new power supply, we are able to choose the supply voltages for the output stages and able to select the Solo polarization in function of the nominal impedance speakers. Solo is now optimised for 8, or 4 Ohm speakers, avoiding unnecessary power losses and with a greater overall performance. We have also increased the size of the heatsinks, now they are a 10% bigger than in the old Shinai and that allows the Solo to deliver more power while heating up less and be more comfortable to use in hot seasons. VOLUME CONTROL Now we have resistors combined with reed relays. Reed relays are the best contact in existence cause they works in vacuum, no impurities, no parasitic capacitances like in solid-state relays and guarantee the passage of every smallest nuance of the signal, without limiting its frequency response, without any distortion! The configuration of these resistors is a pure “ladder" with two blocks of resistors, only in parallel with each other. This configuration use the same principle of the volume regulators with rotary switches, studded with resistors, but with 2 big improvements: No rotary switch in the world has the same contact quality as a reed relay (vacuum) - these switches have few steps, a far cry from the 68 steps + 0 of our regulator. The Shinai has only 33 steps plus 0.

GRANDINOTE Solo Integrated

Είμαστε περήφανοι που παρουσιάζουμε ένα νέο προϊόν που είναι αποτέλεσμα μακράς περιόδου σχεδιασμού και ανάπτυξης. Ο νέος ολοκληρωμένος ενισχυτής Solo. Έχουμε συγκεντρώσει την πολυετή εμπειρία στην ανάπτυξη HiFi σε αυτή τη νέα δημιουργία. Όλα είναι βελτιωμένα όχι μόνο στην ποιότητα του ήχου και την ισχύ (τώρα 60W σε τάξη Α), αλλά ακόμη και σε μια νέα σχεδίαση με μια τεράστια οθόνη 9" γεμάτη λειτουργίες όπως VUmeter, αναλυτής φάσματος και πολλά άλλα. Το όνομα Grandinote σημαίνει τεχνολογία, καινοτομία, ευελιξία, σχεδιασμός και απόλυτη ποιότητα ήχου.

JADIS I70
Add to compare
Quick view
Add to wishlist

JADIS I70

,
€14,470.00
Προσθήκη στο καλάθι

JADIS I70

JADIS I70

JADIS I70

JADIS I300
Add to compare
Quick view
Add to wishlist

JADIS I300

,
€15,490.00
Προσθήκη στο καλάθι

JADIS I300

JADIS I300

JADIS I300

Audio Note Meishu Tonmeister phono As with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.
Add to compare
Quick view
Add to wishlist

Audio Note MEISHU Tonmeister phono 300B SE

,
€15,680.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Audio Note Meishu Tonmeister phono

Audio Note Meishu Tonmeister phonoAs with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.

Audio Note Meishu Tonmeister phono, ολοκληρωμένος ενισχυτής Single Ended 300b με phono stage

Audio Note Meishu Tonmeister Line S.E As with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.
Add to compare
Quick view
Add to wishlist

Audio Note Meishu Tonmeister Line 300B SE Silver Edition

,
€16,440.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Audio Note Meishu Tonmeister Line S.E

Audio Note Meishu Tonmeister Line S.E As with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.

Audio Note Meishu Tonmeister Line S.E ολοκληρωμένος ενισχυτής SET με 300B

-15%
JADIS I88
Add to compare
Quick view
Add to wishlist

JADIS I88

,
Original price was: €19,350.00.Η τρέχουσα τιμή είναι: €16,450.00.
Προσθήκη στο καλάθι

JADIS I88

JADIS I88

JADIS I88

-29%
GRANDINOTE SUPREMO Amplifier
Add to compare
Quick view
Add to wishlist

GRANDINOTE SUPREMO Amplifier

,
Original price was: €24,940.00.Η τρέχουσα τιμή είναι: €17,770.00.
Προσθήκη στο καλάθι
GRANDINOTE SUPREMO Amplifier
O κορυφαίος ολοκληρωμένος ενισχυτής της Ιταλικής GRANDINOTE. Ο SUPREMO σε καθαρή Ταξη A` με μετασχηματιστές εξόδου VHP (Very High Performance) αποδίδει έναν εντυπωσιακά φυσικό ήχο με κορυφαίες χροιες και ανάλυση. Τα εξαιρετικά τεστ σε όλο τον κόσμο προσπαθούν να περιγράψουν το πόσο σωστός και διαφορετικός είναι με τις ανεξάντλητες δυνατότητες του και τον τοποθετούν σε μια κατηγορία από μόνο του.
Ένα έργο τέχνης που τιμάει την μουσική. Αντάξιος των καλύτερων συστημάτων.
Στην κορυφή της πυραμίδας του Hi-End.
 
GRANDINOTE SUPREMO Amplifier

GRANDINOTE SUPREMO Amplifier