Ολοκληρωμένοι ενισχυτές - Nexus Acoustics

Anthem STR integrated amplifier

€5,999.00

Επιλογή

Anthem STR integrated amplifier

MoonRiver Audio Model-404 Reference The MoonRiver Audio Model-404 Reference is a remote-controlled two-channel integrated amplifier (in Dual Mono configuration), power 2x50wrms at 8 ohms. Accepts modules: Phono Stage MM/MC and Coaxial DAC or USB DAC. Inputs 5x Line (or 4x Line, 1x extra Phono), 1x Tape Loop (1x In, 1x Out), 1x USB (for extra dac board. Outputs: 2x pairs Pre Out, 1x pair Speakers. Made in Sweden.

Compare

Quick view

MoonRiver Audio Model-404 Reference

€4,950.00

MoonRiver Audio Model-404 Reference

Audio Note Meishu Tonmeister Line S.E As with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.

Compare

Quick view

Audio Note Meishu Tonmeister Line 300B SE Silver Edition

€16,440.00

Επιλογή

Audio Note Meishu Tonmeister Line S.E

Audio Note Meishu Tonmeister Line S.E ολοκληρωμένος ενισχυτής SET με 300B

Audio Note Meishu Tonmeister phono As with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.

Compare

Quick view

Audio Note MEISHU Tonmeister phono 300B SE

€15,680.00

Επιλογή

Audio Note Meishu Tonmeister phono

Audio Note Meishu Tonmeister phono, ολοκληρωμένος ενισχυτής Single Ended 300b με phono stage

Audio Note Meishu Tonmeister Line As with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.

Compare

Quick view

Audio Note MEISHU TONMEISTER 300B SE Line

€12,470.00

Επιλογή

Audio NOTE MEISHU TONMEISTER 300B SE Line

Audio Note Meishu Tonmeister Line Single Ended class A integraed tube amp with 300b

WiiM AMP WiiM AMP Stereo Network Amplifier Grey The WiiM Amp is an amplifier and streamer that's as compact as it is versatile and high-performance! It lets you distribute your music extremely simply via DLNA, AirPlay 2, Bluetooth (bidirectional) or Chromecast. So you can easily access your music library, whether it's stored on a computer, NAS or smartphone. What's more, control of the device and playback is made easy with the WiiM Home mobile app. The app also gives you access to your favorite streaming platforms, such as Spotify, Tidal, Deezer and Qobuz. On the amplification side, we find a high-efficiency Class D circuit TPA3255, capable of developing a comfortable power of 2x100W into 4Ω or 2x60W into 8Ω.

Compare

Quick view

WiiM AMP

€369.00

WiiM AMP

WiiM AMP Stereo Network Amplifier

Audio Note Cobra Our latest integrated amplifier, producing 28 watts per channel from a pair of EL34 valves operating in Class A push-pull. It is capable of driving a wide variety of 'speakers thanks to its exceptional double C-core output transformers, which are custom designed and manufactured by Audio Note (UK). Cobra is equipped with three analogue stereo inputs, and an additional three digital inputs, via the onboard DAC. The digital coax inputs can accept signals up to 24-bit/176.4kHz (native bit-depth for the Philips TDA1543 D/A converter chip is 16bit, so anything above this is truncated down). The Optical SPDIF input can accept signals up to 24-bit/96kHz (see above). The USB input can accept up to 16-bit/48kHz. Remote volume control, mute and input selection.

Compare

Quick view

AUDIO NOTE COBRA EL34 PP

€5,390.00

Audio Note Cobra

Audio Note Cobra Ολοκληρωμένος ενισχυτής λυχνίας με dac

Vincent SV 800 Hybrid Class-A hybrid integrated amplifier Sonically and in essence, the SV-800 is closer to a classic tube amp than any other hybrid amp on Vincent. In the fully balanced amplifier, a total of 8 tubes are used, which transfer the signal to the power transistors only at the very end. That is, the transistors really only take over the function of amplification. The sound is processed exclusively by the tubes.

Compare

Quick view

Vincent SV 800 Hybrid

€2,925.00

Επιλογή

Vincent SV 800 Hybrid

Class-A Hybrid Stereo Integrated Amplifier In order to minimize interference and to obtain a better harmonic distortion, we have opted for a consistent symmetrical design. In the preliminary stages there are now 3 tubes per side according to the Shunt Regulatet push-pull principle, which process the signal in terms of sound. This provides more accurate bass reproduction and better mid-high frequency performance.

Compare

Quick view

Vincent SV 700 Hybrid

€4,629.00

Επιλογή

Vincent SV 700 Hybrid

Vincent SV 238 MK A full amplifier with the performance of an end stage. 16 Sanken transistors per channel guide the power of the 1,500VA transformer into the right channels. But pure power without control, flexibility and clean signal processing is not enough. Complex Class A circuitry, symmetrical amplifier circuitry and the connection options for XLR sources provide magnificent sound.

Compare

Quick view

Vincent SV 238 MK

€2,775.00

Επιλογή

Vincent SV 238 MK

Vincent SV 237 MK How does an unbeatable device get even better? Quite simply you listen to the wishes of the customers. So was the SV 237 SV 237MK. The big change, from the USB input, was at the frequent request of our customers a coaxial and an optical input. These inputs increase everyday practicality and offer even more connection options. The already unique circuit developed with Frank Blöhbaum was not changed. Unter der Leitung von Frank Blöhbaum, u.a. Entwickler der aktuellen Thorens Elektronik sowie der Auto-BIAS-Regelung bei den großen T.A.C. Röhrenverstärkern, wurde das Schaltungskonzept komplett überarbeitet und verbessert. So wurde in der Endstufen-Sektion durch diverse Veränderungen eine Phasenreserve von nahezu 90° erreicht. Diese Phasenreserve sorgt für ein deutlich besseres Einschwingverhaltenan komplexen Lasten (Boxen). Da der Verstärker im normalen Betrieb immer quasi im Zustand des Einschwingens arbeitet – Musik stellt transiente Impulse dar – hört man diese Verbesserungen elementar. Musikalität und Klang sind deutlich besser als beim Vorgänger. Auch schwierigste Boxen können mühelos angetrieben werden. Der Verstärker beherrscht stets die komplexe Last (Box) ohne angestrengt zu klingen. The pre-stage section was equipped in the second stage with 6N1P tubes. The larger voltage levels provide better signal strength. This results in a higher spectral purity of the signal resulting in a further improved fine drawing in the sound. The tube-like musicality is maintained and there is never an analytical cold in the sound. Another advantage of the improved circuit design is a greatly improved signal-to-noise ratio. The result is excellent reproduction quality even on high-efficiency boxes such as the Impuls series from Dynavox: noise was once. Enjoy explosive live performance as a result of excellent momentum. In addition, the volume control was adjusted more sensitive. Thus, the volume can be adjusted more precisely via the remote control.

Compare

Quick view

Vincent SV 237 MK

€2,129.00

Επιλογή

Vincent SV 237 MK

Vincent SV 238 2 x 200 W into 8 Ohms, 2 x 400 W into 4 Ohm and more than 700 W into 2 Ohm - these are the impressive specifications of this amplifier. A sheer power plant which has been combined with many specialities of high-end technology. Integrated circuits by Crystal are taking care of the low-level signals. Tone controls are of the electronic variety - supervised by a CPU. This means there will be neither any mechanical distortions nor any wear-off. Apart from that, the SV 238 is able to deliver 2 x 60W into 8 Ohms in Class-A mode of operation, which is automatically switched to AB mode if higher power is needed.

Compare

Quick view

Vincent SV 238

€2,520.00

Επιλογή

Vincent SV 238

Vincent SV 234 Integrated power amplifier 2x200 watts, with class A operation. Class A: 2x10 watts. Remote controlled. Balanced.

Compare

Quick view

Vincent SV 234

€1,429.00

Επιλογή

Vincent SV 234

Vincent SV 232 The amplifier SV-232 has multi-functional use through a recording output, a pre-amplifier output, remote control ability and the high-contrast VFD display. But apart from the external appearance this unit also scores with its internal values. To deliver the proverbial Vincent performance the SV-232 possesses a substantially sized heat sink. Despite the immense pricing pressure own technologies from the great archetypes such as the pre-amplifier SA-93Plus have been employed. Thus the well-known Vincent preamp modules are working in the pre-amplifier section. This lends more clarity to the sound characteristics and the sound gets more precise, without losing musicality. The electronic volume control results in clearly improved synchronisation and decreased ageing vulnerability compared with a potentiometer. Sound-defining parts were paid increased attention in the SV-232, a factor you can hear, and which makes this Vincent again a real price/performance wonder.

Compare

Quick view

Vincent SV 232

€1,192.00

Επιλογή

Vincent SV 232

Vincent SV 226 MK II Vincent does it again. The German-based audio company demonstrates an insatiable love of music with the hybrid SV-226 integrated amplifier. Whether it’s the liquid glide of a classic Duke Ellington recording or hammering hip hop rhythms, the Vincent SV226 makes all of your tunes sound true to life. Expensive MPK-capacitors and extremely precise metal film resistors in the signal path contribute to the sonic purity. The heavy duty chassis provides a stable platform for the premium electronics. The SV-226 includes inputs for five line level sources, a preamp output, and four pairs of heavy duty five-way speaker binding posts to facilitate biwiring. The tone controls let you sculpt the sound to suit your tastes and room acoustics, while a loudness switch helps preserve the dynamics of your music even at low amplitude levels.

Compare

Quick view

Vincent SV 226 MK II

€1,181.00

Vincent SV 226 MK II

VINCENT SV-500 Our access into the "Hybridworld" of Vincent. On the basis of the established SV-227, we have developed this amplifier. With a little less output power, but with a similar timeless design and with the typical Vincent sound characteristics the SV-500 is presented.

Compare

Quick view

VINCENT SV-500

€1,389.00

Επιλογή

VINCENT SV-500

VINCENT SV-500 hybrid integrated amplifier with dac

VINCENT SV-200 With the SV-200 we present the little brother of the SV-237MK and the SV-700. Despite the compact construction only a few compromises had to be made. A high dynamic and a low noise level stand out for this amplifier. The music signal is conditioned through two 6N1 tubes.

Compare

Quick view

VINCENT SV-200

€999.00

Επιλογή

VINCENT SV-200

VINCENT SV-737 Our new flagship of the integrated amplifiers. The preamp section was completely new developed and benefits a lot of the SA-T7. Through the build-in Wifi modul the amplifier music streaming could be done and it could be integrated in your home network.

Compare

Quick view

VINCENT SV-737

€3,399.00

Επιλογή

VINCENT SV-737

VINCENT SV-228 The SV-228 is the consistent further development of one of ours successful amplifiers series in the Power Line. In a complete new design, with a VU meter embedded in the front panel, the SV-228 is the legitimate successor of the SV-227 MK.

Compare

Quick view

VINCENT SV-228

€2,249.00

Επιλογή

VINCENT SV-228

ELECTROCOMPANIET ECI-6 MKII The new ECI 6 MKII is a powerful integrated amplifier equipped with 4 analogue inputs. The ECI 6 MKII offers 2 x 125 Watts and is based on the successful ECI 5 MK II. To enhance it, we have equipped the ECI 6 MKII with an even better power supply and a more sophisticated preamplifier module. As a result we can offer you an extremely substantial and dynamic amplifier, capable of controlling a wide range of speakers on the market.

Compare

Quick view

ELECTROCOMPANIET ECI-6 MKII

€5,999.00

ELECTROCOMPANIET ECI-6 MKII

ELECTROCOMPANIET ECI-6 MKII dc coupled hi end integrated amplifier

Compare

Quick view

ELECTROCOMPANIET ECI 5 MKII

€5,299.00

ELECTROCOMPANIET ECI 5 MKII

ELECTROCOMPANIET ECI 5 MKII DC COUPLED INTEGRATED AMPLIFIER

The Audiolab 9000A integrated amplifier is the company's flagship integrated amplifier. With 100 watts per channel into 8 ohms, the built-in DAC - ES9038Pro - is capable of 44.1kHz-768kHz (PCM) / up to DSD512, it also has a built-in MQA Full Decoder and features an excellent MM pickup head preamp and headphone amplifier.

Compare

Quick view

Audiolab 9000A

€2,199.00

Επιλογή

Audiolab 9000A

Audiolab 9000A ολοκληρωμένος ενισχυτής

The Audiolab 7000A in conclusion is an integrated amplifier with a power of 70 W per channel with streaming capabilities that also features a DAC using the ESS ES9038Q2M 32-bit with PCM768kHz, DSD512.

Compare

Quick view

Audiolab 7000A

€1,389.00

Επιλογή

Audiolab 7000A

Audiolab 7000A integrated amplifier with streamer/dac and phono stage

Audiolab OMNIA is an integrated amplifier with built in cd player MQA capable streaming service support and 50 watts per channel.

Compare

Quick view

Audiolab OMNIA