Show sidebar
Show 24 48 64
Filters
Audio Note ANE-SPE-HE Details The majority of the high-end audio marketplace is occupied by ill-conceived low efficiency loudspeaker systems. These designs usually consist of several less-than-ideally matched drivers and a very complex crossover, crammed into a cabinet that exhibits the tonal and textural qualities of reinforced concrete. Their designers are blinded by the dogmatic quest for high sound pressure levels and flat response. But what of the other factors which are essential for emotionally involving music reproduction? What about coherence, full natural micro—as well as macro—dynamics, inner detail? What about LIFE? What about EMOTION? Sorry, they’re just not part of the “High Performance Audio” design brief. And Music suffers for it. The design of the AN-E Loudspeaker, by contrast, follows an altogether different philosophy. It calls for a cabinet that complements the chosen drive units, rather than fighting against them. Instead of trying to kill the resonances, we tailor the cabinet to place them in frequency bands where they aid and enhance the operation of the drive units, culminating in a loudspeaker system that makes the most of the preceding amplifier’s output. The material choice for the cabinet is an area where a great deal of research and development has taken place. Over the years, we have tried many different materials and combinations, a time consuming endeavour culminating in the current design, which utlises the highest quality birch ply for the entire cabinet. Bracing and internal damping is kept to a minimum and strategically applied to help, not hinder the drivers. The ported cabinet has been designed to be placed close to room boundaries, where the bass performance is augmented significantly by the additional reinforcement offered by the nearby walls. In this position, it will outperform any similarly sized speaker regardless of origin, thanks in part to the shallow cabinet / wide baffle shape which gives the drivers the best possible operating conditions, allowing them to perform as if they are mounted in a virtual wall. This provides the most undisturbed sound field with the widest and most even dispersion possible from a real world cabinet shape. The crossover is simple, essentially first order, hardwired and incorporates air-cored chokes and selected bipolar and polypropylene capacitors (either copper foil or silver foil, depending on model). The internal cabling consists of either 99.99% pure copper or 99.99% pure silver Audio Note (UK) wire, depending on the exact model. (See specifications.) Consistent performance is a major issue in loudspeaker design and unfortunately all drive units vary slightly from each other, even if they look the same and have the same basic specification. Many loudspeaker manufacturer’s will tell you that they provide “computer matched” crossovers, and whilst this may be true in one sense (each crossover may have been matched to have the exact same capacitance, inductance and resistance) this essentially “passive” method does not adequately take into consideration the mechanical and acoustic variance present in the drive units themselves, where minute differences in acoustic behaviour will result in quite substantial differences in performance and sound. Therefore, to obtain the best possible combination of drivers and crossovers, we have developed a dynamic matching process. This ensures that each loudspeaker in a stereo pair matches a "master curve" and also its partner, to within 0.4dB. To the best of our knowledge, no other loudspeaker manufacturer achieves such close matching and tests 100% of its production. Another much overlooked area of loudspeaker design is the material choice for the drivers. It has become very fashionable to use all manner of exotic materials (beryllium, diamond, carbon fibre, ceramics etc.) as cone materials in modern drivers, mainly because it gives the impression that the manufacturer in question is making great strides in their research into better sounding speakers. The sad fact is none of these materials work as intended, as they all have their own distinct sonic signature, so no matter how the crossover is designed, this sonic signature will be present when the speaker reproduces music. It may be less obvious and audible with some types of music, but ultimately the chosen material will always imprint some of its own signature on whatever sound is reproduced. In addition, it is vitally important that the sound and characteristics of an individual drive unit are complimentary to those of its chosen partner, so that when an instrument is reproduced by both drive units (which is almost always the case), the upper range does not sound detached from the lower range and visa versa. This is an aspect of performance that cannot be measured by even the most sophisticated test equipment; it can ONLY be judged by listening. We at Audio Note are keenly aware of this and have deliberately chosen drive units whose sonic signatures are as closely matched as possible. This has led us to favour good, old fashioned paper and Hemp paper for the woofer cone and impregnated silk for the dome tweeter. These materials, when matched correctly, marry the low and high frequencies seamlessly, providing the best level of performance possible in the real world of acoustics.
Add to compare
Quick view
Add to wishlist

Audio Note ANE-SPE-HE

,
€12,450.00
Προσθήκη στο καλάθι

Audio Note ANE-SPE-HE

Audio Note ANE-SPE-HE Details The majority of the high-end audio marketplace is occupied by ill-conceived low efficiency loudspeaker systems. These designs usually consist of several less-than-ideally matched drivers and a very complex crossover, crammed into a cabinet that exhibits the tonal and textural qualities of reinforced concrete. Their designers are blinded by the dogmatic quest for high sound pressure levels and flat response. But what of the other factors which are essential for emotionally involving music reproduction? What about coherence, full natural micro—as well as macro—dynamics, inner detail? What about LIFE? What about EMOTION? Sorry, they’re just not part of the “High Performance Audio” design brief. And Music suffers for it. The design of the AN-E Loudspeaker, by contrast, follows an altogether different philosophy. It calls for a cabinet that complements the chosen drive units, rather than fighting against them. Instead of trying to kill the resonances, we tailor the cabinet to place them in frequency bands where they aid and enhance the operation of the drive units, culminating in a loudspeaker system that makes the most of the preceding amplifier’s output. The material choice for the cabinet is an area where a great deal of research and development has taken place. Over the years, we have tried many different materials and combinations, a time consuming endeavour culminating in the current design, which utlises the highest quality birch ply for the entire cabinet. Bracing and internal damping is kept to a minimum and strategically applied to help, not hinder the drivers. The ported cabinet has been designed to be placed close to room boundaries, where the bass performance is augmented significantly by the additional reinforcement offered by the nearby walls. In this position, it will outperform any similarly sized speaker regardless of origin, thanks in part to the shallow cabinet / wide baffle shape which gives the drivers the best possible operating conditions, allowing them to perform as if they are mounted in a virtual wall. This provides the most undisturbed sound field with the widest and most even dispersion possible from a real world cabinet shape. The crossover is simple, essentially first order, hardwired and incorporates air-cored chokes and selected bipolar and polypropylene capacitors (either copper foil or silver foil, depending on model). The internal cabling consists of either 99.99% pure copper or 99.99% pure silver Audio Note (UK) wire, depending on the exact model. (See specifications.) Consistent performance is a major issue in loudspeaker design and unfortunately all drive units vary slightly from each other, even if they look the same and have the same basic specification. Many loudspeaker manufacturer’s will tell you that they provide “computer matched” crossovers, and whilst this may be true in one sense (each crossover may have been matched to have the exact same capacitance, inductance and resistance) this essentially “passive” method does not adequately take into consideration the mechanical and acoustic variance present in the drive units themselves, where minute differences in acoustic behaviour will result in quite substantial differences in performance and sound. Therefore, to obtain the best possible combination of drivers and crossovers, we have developed a dynamic matching process. This ensures that each loudspeaker in a stereo pair matches a "master curve" and also its partner, to within 0.4dB. To the best of our knowledge, no other loudspeaker manufacturer achieves such close matching and tests 100% of its production. Another much overlooked area of loudspeaker design is the material choice for the drivers. It has become very fashionable to use all manner of exotic materials (beryllium, diamond, carbon fibre, ceramics etc.) as cone materials in modern drivers, mainly because it gives the impression that the manufacturer in question is making great strides in their research into better sounding speakers. The sad fact is none of these materials work as intended, as they all have their own distinct sonic signature, so no matter how the crossover is designed, this sonic signature will be present when the speaker reproduces music. It may be less obvious and audible with some types of music, but ultimately the chosen material will always imprint some of its own signature on whatever sound is reproduced. In addition, it is vitally important that the sound and characteristics of an individual drive unit are complimentary to those of its chosen partner, so that when an instrument is reproduced by both drive units (which is almost always the case), the upper range does not sound detached from the lower range and visa versa. This is an aspect of performance that cannot be measured by even the most sophisticated test equipment; it can ONLY be judged by listening. We at Audio Note are keenly aware of this and have deliberately chosen drive units whose sonic signatures are as closely matched as possible. This has led us to favour good, old fashioned paper and Hemp paper for the woofer cone and impregnated silk for the dome tweeter. These materials, when matched correctly, marry the low and high frequencies seamlessly, providing the best level of performance possible in the real world of acoustics.

Audio Note ANE-SPE-HE

Audio Note Meishu Tonmeister Line As with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.
Add to compare
Quick view
Add to wishlist

Audio Note MEISHU TONMEISTER 300B SE Line

,
€12,470.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Audio NOTE MEISHU TONMEISTER  300B SE Line

Audio Note Meishu Tonmeister LineAs with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.

Audio Note Meishu Tonmeister Line Single Ended class A integraed tube amp with 300b

ATC C6 Sub Hand-built in England, the ATC C4 Sub Mk2 is a high-performance active subwoofer, engineered to deliver professional studio quality sound to the home environment. Designed to integrate C6 Sub Full “SL” spec 15˝/375mm bass driver. 450W Class G amplifier. Phase adjustment. Variable cut off frequency. Variable gain. Stereo inputs. 6 year warranty.
Add to compare
Quick view
Add to wishlist

ATC C6 Sub

€12,500.00
Προσθήκη στο καλάθι

ATC C6 Sub

ATC C6 Sub Hand-built in England, the ATC C4 Sub Mk2 is a high-performance active subwoofer, engineered to deliver professional studio quality sound to the home environment. Designed to integrate C6 Sub Full “SL” spec 15˝/375mm bass driver. 450W Class G amplifier. Phase adjustment. Variable cut off frequency. Variable gain. Stereo inputs. 6 year warranty.

ATC C6 Sub

Fyne Audio F703
Add to compare
Quick view
Add to wishlist

Fyne Audio F703

,
€12,565.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Fyne Audio F703

Fyne Audio F703

Fyne Audio F703

Jadis I50
Add to compare
Quick view
Add to wishlist

JADIS I50

,
€12,770.00
Προσθήκη στο καλάθι

JADIS I50

Jadis I50

Jadis I50

Emillé Labs KI-270W
Add to compare
Quick view
Add to wishlist

Emillé Labs KI-270W

,
€12,880.00
Προσθήκη στο καλάθι

Emillé Labs KI-270W

Emillé Labs KI-270W, ένας εξαιρετικός ολοκληρωμένος ενισχυτής από την EMILLE.  O KI-270W διαθέτει περίσσεια ρεύματος με τα 2x70 Watt στα 8/4ohm. Σε τοπολογία Push-Pull με 2 λυχνίες εξόδου 6550 ανά κανάλι ο ενισχυτής είναι ικανός να οδηγήσει ακόμα και δύσκολα ηχεία. Επιπλέον ο Emille KI-270W δέχεται και λυχνίες εξόδου KT-120 αυξάνοντας την ισχύ του στα 2x90 Watt.

Ο Emille KI-270W διαθέτει εξωτερική ρύθμιση ΒΙΑS με τα όργανα να βρίσκονται στο μπροστινό πάνελ. Ο ενισχυτής έχει μοναδική ποιότητα κατασκευής και design και φιλοξενείτε σε ένα εξαιρετικό case αλουμινίου με πολύ υψηλό WAF, ενώ η μελετημένη κατασκευή του case βοηθά τον EMILLE να δουλεύει σε πολύ χαμηλές θερμοκρασίες χωρίς μεταβολή της απόδοσης του για πολλές ώρες λειτουργίας. Ο KI-270W ξεπερνάει σε απόδοση πολλά σετ προ-τελικών υπερδιπλάσιας άξιας. Έχει χειροποίητους μετασχηματιστές έξοδου με πυρήνα Μ-6, είναι dual-mono κατασκευή και διαθέτει ένα ιδανικό Phase –Splitter. Όλα αυτά ανεβάζουν κάθετα την ποιότητα ήχου κάνοντας τον KI-270W να συναγωνίζεται άμεσα τους Single-Ended ενισχυτές στην φυσικότητα στα μεσαία, χωρίς να έχει τα ελαττώματα τους στα άκρα του ηχητικού φάσματος και την ανεπαρκή οδήγηση των ηχείων. Η ποιότητα ήχου του είναι φυσική και γραμμική από το πρώτο 0,1 Watt έως την μέγιστη ισχύ του.
Emillé Labs KI-270W

Emillé Labs KI-270W

ATC SCM20ASLT The SCM20SL Tower is ATC’s flagship 2-way floor-standing loudspeaker and is the ideal choice in modestly sized rooms, but where performance cannot be compromised. It is available in both passive and active bi-amplified versions, the SCM20PSLT and SCM20ASLT respectively. Its sealed cabinet design ensures excellent timing, useful low frequency output below the cut-off and that the speakers can be placed relatively close to walls without excessive low frequency ‘boom’. Both the mid-bass driver and tweeter are handmade by ATC. The bass driver is a 6”/150mm part with huge 3”/75mm voice coil and massive, long-gap (short-coil) motor assembly featuring ATC’s proprietary ‘SL’ motor technology. The tweeter is a 1”/25mm soft-dome part featuring a dual-suspension and very high energy 2.1 tesla motor. Together, they form the basis for an exceptional 2-way monitor loudspeaker capable of delivering outstanding resolution and musicality. Driver integration withing the passive model is handled 2nd order crossover featuring oversize air-core inductors which are would in-house by ATC. Capacitors are all high voltage polypropylene film types and the input features heavy duty binding posts in a bi-wire configuration. The active SCM20ASLT features an on-board ATC bi-amp pack featuring 2-way active crossovers and class A/B MOSFET power amps, delivering a total power output of 250W. The active crossovers superior accuracy and phase coherence, plus the removal of the lossy passive components between power amp and drivers deliver a level of performance that simply can’t be matched by competing passive designs. The SCM20 cabinet is constructed to be heavy and inert, with bitumastic damping panels deployed at critical positions to minimise cabinet colouration. The cabinets are available in 10 different hand selected veneers; satin black/white painted finishes and also piano/white high gloss polyester.
Add to compare
Quick view
Add to wishlist

ATC SCM20ASLT

,
€12,900.00
Προσθήκη στο καλάθι

ATC SCM20ASLT

ATC SCM20ASLTThe SCM20SL Tower is ATC’s flagship 2-way floor-standing loudspeaker and is the ideal choice in modestly sized rooms, but where performance cannot be compromised. It is available in both passive and active bi-amplified versions, the SCM20PSLT and SCM20ASLT respectively. Its sealed cabinet design ensures excellent timing, useful low frequency output below the cut-off and that the speakers can be placed relatively close to walls without excessive low frequency ‘boom’. Both the mid-bass driver and tweeter are handmade by ATC. The bass driver is a 6”/150mm part with huge 3”/75mm voice coil and massive, long-gap (short-coil) motor assembly featuring ATC’s proprietary ‘SL’ motor technology. The tweeter is a 1”/25mm soft-dome part featuring a dual-suspension and very high energy 2.1 tesla motor. Together, they form the basis for an exceptional 2-way monitor loudspeaker capable of delivering outstanding resolution and musicality. Driver integration withing the passive model is handled 2nd order crossover featuring oversize air-core inductors which are would in-house by ATC. Capacitors are all high voltage polypropylene film types and the input features heavy duty binding posts in a bi-wire configuration. The active SCM20ASLT features an on-board ATC bi-amp pack featuring 2-way active crossovers and class A/B MOSFET power amps, delivering a total power output of 250W. The active crossovers superior accuracy and phase coherence, plus the removal of the lossy passive components between power amp and drivers deliver a level of performance that simply can’t be matched by competing passive designs. The SCM20 cabinet is constructed to be heavy and inert, with bitumastic damping panels deployed at critical positions to minimise cabinet colouration. The cabinets are available in 10 different hand selected veneers; satin black/white painted finishes and also piano/white high gloss polyester.

ATC SCM20ASLT active floorstanding monitor

-10%
GRANDINOTE Solo Integrated We are proud to introduce a new product that is the result of a long period of design and development. The new integrated amplifier Solo. We have concentrated years of experience in HiFi development into this new creation. Everything is improved not only the audio quality and the power (now 60W in class A) but even a new design with a huge 9” display full of functions like VUmeter, spectrum analyser and more. Grandinote is technology, innovation, flexibility, design and absolute audio quality. MAGNETOSOLID TECHNOLOGY Magnetosolid is a unique technology from Grandinote, designed by engineer Massimiliano Magri and a great expression of Made in Italy. Created in 2002 in its first versions, it integrates two words in its name: Magneto and Solid. Magneto because of its ferromagnetic components and output transformers and Solid because of its solid-state components. It is a circuit that brings the best of tubes and solid-state technology to our amplifiers. As with tube systems, the circuit is as simple and straightforward as possible, but with all the qualities of solid state. The main advantage of tubes over solid state, is the absence of parasitic capacitance. Our Magnetosolid technology, has overcome even this obstacle by delivering a sound that is absolutely faithful to the source without the loss of any detail and with the ability to control any speaker. The frequency response of Magnetosolid amplifiers is the best on the market, superior to either tube or solid-state systems. All components of the sound message are in place. Detail, presence, full dynamic and control thanks also to an absolute reference damping factor. In the Solo and in the new Grandinote Magnetosolid amplifiers the audio circuit has been further improved compared to previous ones such as the Shinai, with voltages and polarizations even richer and oversized. An increase of over 50% going from 60V to 96V while maintaining the purity of the signal unchanged. POWER SUPPLY Grandinote's new Magnetosolid amplifiers are now equipped with a new switching power supply with electro-medical rigor standards and a new concept. All circuits are pure class A with an always constant current. The absorption does not depend on the signal and this means that the power supply will always supply the same current. It is very important to underline that our switching power supplies never modulate the current based on the signal. The development of our new switching power supplies has broken down the paradigm of toroidal as the only solution. With our design they are now qualitatively on par with toroidals and perfectly integrated with Grandinote's Magnetosolid circuits in pure class A. With our new power supply, we are able to choose the supply voltages for the output stages and able to select the Solo polarization in function of the nominal impedance speakers. Solo is now optimised for 8, or 4 Ohm speakers, avoiding unnecessary power losses and with a greater overall performance. We have also increased the size of the heatsinks, now they are a 10% bigger than in the old Shinai and that allows the Solo to deliver more power while heating up less and be more comfortable to use in hot seasons. VOLUME CONTROL Now we have resistors combined with reed relays. Reed relays are the best contact in existence cause they works in vacuum, no impurities, no parasitic capacitances like in solid-state relays and guarantee the passage of every smallest nuance of the signal, without limiting its frequency response, without any distortion! The configuration of these resistors is a pure “ladder" with two blocks of resistors, only in parallel with each other. This configuration use the same principle of the volume regulators with rotary switches, studded with resistors, but with 2 big improvements: No rotary switch in the world has the same contact quality as a reed relay (vacuum) - these switches have few steps, a far cry from the 68 steps + 0 of our regulator. The Shinai has only 33 steps plus 0.
Add to compare
Quick view
Add to wishlist

GRANDINOTE Solo Integrated

,
Original price was: €14,400.00.Η τρέχουσα τιμή είναι: €12,960.00.
Προσθήκη στο καλάθι

GRANDINOTE Solo Integrated

GRANDINOTE Solo Integrated We are proud to introduce a new product that is the result of a long period of design and development. The new integrated amplifier Solo. We have concentrated years of experience in HiFi development into this new creation. Everything is improved not only the audio quality and the power (now 60W in class A) but even a new design with a huge 9” display full of functions like VUmeter, spectrum analyser and more. Grandinote is technology, innovation, flexibility, design and absolute audio quality. MAGNETOSOLID TECHNOLOGY Magnetosolid is a unique technology from Grandinote, designed by engineer Massimiliano Magri and a great expression of Made in Italy. Created in 2002 in its first versions, it integrates two words in its name: Magneto and Solid. Magneto because of its ferromagnetic components and output transformers and Solid because of its solid-state components. It is a circuit that brings the best of tubes and solid-state technology to our amplifiers. As with tube systems, the circuit is as simple and straightforward as possible, but with all the qualities of solid state. The main advantage of tubes over solid state, is the absence of parasitic capacitance. Our Magnetosolid technology, has overcome even this obstacle by delivering a sound that is absolutely faithful to the source without the loss of any detail and with the ability to control any speaker. The frequency response of Magnetosolid amplifiers is the best on the market, superior to either tube or solid-state systems. All components of the sound message are in place. Detail, presence, full dynamic and control thanks also to an absolute reference damping factor. In the Solo and in the new Grandinote Magnetosolid amplifiers the audio circuit has been further improved compared to previous ones such as the Shinai, with voltages and polarizations even richer and oversized. An increase of over 50% going from 60V to 96V while maintaining the purity of the signal unchanged. POWER SUPPLY Grandinote's new Magnetosolid amplifiers are now equipped with a new switching power supply with electro-medical rigor standards and a new concept. All circuits are pure class A with an always constant current. The absorption does not depend on the signal and this means that the power supply will always supply the same current. It is very important to underline that our switching power supplies never modulate the current based on the signal. The development of our new switching power supplies has broken down the paradigm of toroidal as the only solution. With our design they are now qualitatively on par with toroidals and perfectly integrated with Grandinote's Magnetosolid circuits in pure class A. With our new power supply, we are able to choose the supply voltages for the output stages and able to select the Solo polarization in function of the nominal impedance speakers. Solo is now optimised for 8, or 4 Ohm speakers, avoiding unnecessary power losses and with a greater overall performance. We have also increased the size of the heatsinks, now they are a 10% bigger than in the old Shinai and that allows the Solo to deliver more power while heating up less and be more comfortable to use in hot seasons. VOLUME CONTROL Now we have resistors combined with reed relays. Reed relays are the best contact in existence cause they works in vacuum, no impurities, no parasitic capacitances like in solid-state relays and guarantee the passage of every smallest nuance of the signal, without limiting its frequency response, without any distortion! The configuration of these resistors is a pure “ladder" with two blocks of resistors, only in parallel with each other. This configuration use the same principle of the volume regulators with rotary switches, studded with resistors, but with 2 big improvements: No rotary switch in the world has the same contact quality as a reed relay (vacuum) - these switches have few steps, a far cry from the 68 steps + 0 of our regulator. The Shinai has only 33 steps plus 0.

GRANDINOTE Solo Integrated

Είμαστε περήφανοι που παρουσιάζουμε ένα νέο προϊόν που είναι αποτέλεσμα μακράς περιόδου σχεδιασμού και ανάπτυξης. Ο νέος ολοκληρωμένος ενισχυτής Solo. Έχουμε συγκεντρώσει την πολυετή εμπειρία στην ανάπτυξη HiFi σε αυτή τη νέα δημιουργία. Όλα είναι βελτιωμένα όχι μόνο στην ποιότητα του ήχου και την ισχύ (τώρα 60W σε τάξη Α), αλλά ακόμη και σε μια νέα σχεδίαση με μια τεράστια οθόνη 9" γεμάτη λειτουργίες όπως VUmeter, αναλυτής φάσματος και πολλά άλλα. Το όνομα Grandinote σημαίνει τεχνολογία, καινοτομία, ευελιξία, σχεδιασμός και απόλυτη ποιότητα ήχου.

Magnepan 3.7i
Add to compare
Quick view
Add to wishlist

Magnepan 3.7i

,
€12,980.00
Προσθήκη στο καλάθι

Magnepan 3.7i

Τα Magnepan MG 3.7i είναι τα πρώτα ηχεία δαπέδου της γκάμας των Magnepan που ενσωματώνουν το διάσημο ribbon tweeter της εταιρείας μαζί με την quasi-ribbon bass και midrange μονάδα της Magnepan. Τα maggie 3.7i είναι 3 δρόμων με ευαισθησία 86dB στα 4 Ohm και έχουν απόκριση 35Hz- 40 kHz και όπως γράφει ο Jonathan Valin από το absolute sound είναι best buy.. στην κατηγορία τιμής τους.

Magnepan 3.7i

Magnepan 3.7i

Classe Delta Mono Amplifier POWER AMPLIFIER Delta MONO embodies exquisite, controlled, unending power. A perfectly detailed enclosure cradles a highly innovative blend of technologies and hand-selected components which deliver effortless, refined sound.
Add to compare
Quick view
Add to wishlist

Classe Delta Mono Amplifier

,
€13,000.00
Προσθήκη στο καλάθι

Classe Delta Mono Amplifier

Classe Delta Mono AmplifierPOWER AMPLIFIER Delta MONO embodies exquisite, controlled, unending power. A perfectly detailed enclosure cradles a highly innovative blend of technologies and hand-selected components which deliver effortless, refined sound.

Classe Delta Mono Amplifier

PROAC K3
Add to compare
Quick view
Add to wishlist

PROAC K3

,
€13,200.00
Προσθήκη στο καλάθι

Για το πιο compact επιδαπέδιο ηχείο της σειράς K, το K3, έπρεπε να αναπτυχθεί μια νέα μονάδα χαμηλομεσαίων συχνοτήτων (mid-woofer) κατασκευασμένη από Kevlar. Το νέο mid-woofer ανεβαίνει ψηλότερα στην μεσαία περιοχή με αποτέλεσμα να επωφελείται καλύτερης λεπτομέρειας και μεγαλύτερης διασποράς λόγω και της ενσωμάτωσης και ενός phase plug.

Δύο από αυτές τις μονάδες mid-woofer χρησιμοποιούνται με το ribbon tweeter μας τοποθετημένο κεντρικά ανάμεσα τους στην καμπίνα μας με κατασκευή K. Ένα crossover υψηλής ποιότητας σχεδιάστηκε ειδικά για το K3 ώστε να συνδυάζεται άψογα με το ribbon tweeter. Το crossover χρησιμοποιεί εξαρτήματα υψηλής ποιότητας και είναι φτιαγμένο για διπλό-καλωδίωση.

Όσον αφορά την ποιότητα του ήχου, το K3 έχει έναν υπέροχο ήχο ηλεκτροστατικού ηχείου στην μεσαία περιοχή που είναι πολύ καθαρός και με πολύ λεπτομέρεια ενώ ταυτόχρονα διαθέτει και εξαιρετικά δυναμικό χαμηλό.

Το K3 έχει σχεδιαστεί για τους πελάτες μας που θέλουν ένα compact floorstanding ηχείο που να μπορεί να παίξει οποιοδήποτε είδος μουσικής με άνεση.

PROAC K3

PROAC K3

BRYSTON 875HT 8 Ch
Add to compare
Quick view
Add to wishlist

BRYSTON 875HT 8 Ch

,
€13,250.00
Προσθήκη στο καλάθι

BRYSTON 875HT 8 Ch

BRYSTON 875HT 8 Ch

BRYSTON 875HT 8 Ch

KEF Reference 3 Meta
Add to compare
Quick view
Add to wishlist

KEF Reference 3 Meta

,
€13,500.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

KEF Reference 3 Meta

KEF Reference 3 Meta

KEF Reference 3 Meta

ZYX ULTIMATE EX ASTRO
Add to compare
Quick view
Add to wishlist

ZYX ULTIMATE EX ASTRO

,
€13,500.00
Προσθήκη στο καλάθι

ZYX ULTIMATE EX ASTRO

ZYX ULTIMATE EX ASTRO

ZYX ULTIMATE EX ASTRO

JADIS JP30MC MKIII preamplifier
Add to compare
Quick view
Add to wishlist

JADIS JP30MC MKIII preamplifier

,
€13,790.00
Προσθήκη στο καλάθι

JADIS JP30MC MKIII preamplifier

JADIS JP30MC MKIII preamplifier

JADIS JP30MC MKIII preamplifier

-8%
BRYSTON 21B³
Add to compare
Quick view
Add to wishlist

BRYSTON 21B³

,
Original price was: €15,180.00.Η τρέχουσα τιμή είναι: €13,900.00.
Προσθήκη στο καλάθι

BRYSTON 21B³

BRYSTON 21B³

BRYSTON 21B³

Sold out
Electrocompaniet AW 400 Reference MONO
Add to compare
Quick view
Add to wishlist

Electrocompaniet AW 400 Reference MONO

,
€13,998.00
Διαβάστε περισσότερα

Electrocompaniet AW 400 Reference MONO

Oι μονομπλόκ Electrocompaniet AW 400 Reference MONO είναι ένας τελικοί ενισχυτές ισχύος γνωστοί για τον αχρωμάτιστο ήχο τους και τις εξαιρετικές δυνατότητες οδήγησης. Οι Electrocompaniet AW 400 Reference MONO αποδίδουν 1 x 400 WRMS στα 8Ω, 1 x 765 WRMS στα 4Ω, 1 x 1010 WRMS στα 2Ω. Αποδίδουν ρεύμα κορυφής μεγαλύτερο από 150A έχει Damping Factor μεγαλύτερο από 500, λειτουργούν σε τάξη A, ενώ έχουν δυνατότητα οδήγησης φορτίων έως και 0,5Ω.
Electrocompaniet AW 400 Reference MONO

Electrocompaniet AW 400 Reference MONO

Triangle Magellan - Quatuor 40th Premium Floorstanding Speaker - Magellan Quatuor 40th Music as if you were at the opera. The sound image takes on a whole new dimension here, filling the space with sophistication. The Quatuor 40th, a 135cm high 3-way floorstander, is the flagship of the new MAGELLAN 40th anniversary edition. With a new dome made of magnesium alloy, its horn tweeter reveals the finest details of your recordings smoothly and accurately. The Quatuor 40th is characterized by the addition of a rear tweeter that allows the speaker to radiate energy to the front and rear of the transmitting point. The sound level is better distributed, and the placement of the speaker simplified. The 16cm driver with a paper diaphragm and small pleat suspensions, a distinctive feature of TRIANGLE speakers, reproduces any vocal register with great neutrality and without the slightest coloration. The powerful and extensive bass of the three 16cm drivers is perfectly suited for modern music as well as for a prestigious string quartet or a cello suite. Its proprietary SVA diaphragm and its cooling system provide exceptional performances in the bass and sub-bass register. Its extended bandwidth and its significant reserve of power make it possible to easily provide sound in rooms larger than 30m2.
Add to compare
Quick view
Add to wishlist

Triangle Magellan – Quatuor 40th

,
€14,469.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Triangle Magellan - Quatuor 40th

Triangle Magellan - Quatuor 40thPremium Floorstanding Speaker - Magellan Quatuor 40th Music as if you were at the opera. The sound image takes on a whole new dimension here, filling the space with sophistication. The Quatuor 40th, a 135cm high 3-way floorstander, is the flagship of the new MAGELLAN 40th anniversary edition. With a new dome made of magnesium alloy, its horn tweeter reveals the finest details of your recordings smoothly and accurately. The Quatuor 40th is characterized by the addition of a rear tweeter that allows the speaker to radiate energy to the front and rear of the transmitting point. The sound level is better distributed, and the placement of the speaker simplified. The 16cm driver with a paper diaphragm and small pleat suspensions, a distinctive feature of TRIANGLE speakers, reproduces any vocal register with great neutrality and without the slightest coloration. The powerful and extensive bass of the three 16cm drivers is perfectly suited for modern music as well as for a prestigious string quartet or a cello suite. Its proprietary SVA diaphragm and its cooling system provide exceptional performances in the bass and sub-bass register. Its extended bandwidth and its significant reserve of power make it possible to easily provide sound in rooms larger than 30m2.

Triangle Magellan - Quatuor 40th
Premium ηχείο δαπέδου 

JADIS I70
Add to compare
Quick view
Add to wishlist

JADIS I70

,
€14,470.00
Προσθήκη στο καλάθι

JADIS I70

JADIS I70

JADIS I70

JADIS JA30 MKII
Add to compare
Quick view
Add to wishlist

JADIS JA30 MKII

,
Price range: €14,470.00 through €15,320.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

JADIS JA30 MKII

JADIS JA30 MKII

JADIS JA30 MKII

YAMAHA NS-5000
Add to compare
Quick view
Add to wishlist

YAMAHA NS-5000

,
€14,550.00
Προσθήκη στο καλάθι

YAMAHA NS-5000

YAMAHA NS-5000

YAMAHA NS-5000

Zesto Audio Leto Ultra II
Add to compare
Quick view
Add to wishlist

Zesto Audio Leto Ultra II Preamp

€14,750.00
Προσθήκη στο καλάθι

Zesto Audio Leto Ultra II Preamp

Zesto Audio - Leto Ultra II Preamplifier
Zesto Audio Leto Ultra II

Zesto Audio Leto Ultra II

-5%
BRYSTON 14B Cubed
Add to compare
Quick view
Add to wishlist

BRYSTON 14B Cubed

,
Original price was: €15,500.00.Η τρέχουσα τιμή είναι: €14,770.00.
Προσθήκη στο καλάθι

BRYSTON 14B Cubed

BRYSTON 14B Cubed

BRYSTON 14B Cubed

CEC TL 1N
Add to compare
Quick view
Add to wishlist

CEC TL 1N

,
€14,790.00
Προσθήκη στο καλάθι

CEC TL 1N

CEC TL 1N

CEC TL 1N