Show sidebar
Show 24 48 64
Filters
Nordost QRT 1 QK1 AC ENHANCER The QKOIL QK1 AC Enhancer uses a load resonating coil (LRC) to generate a passive electronic field that has a beneficial sonic effect on the AC current. Like the QV2, The QKOIL provides a vital solution to the issues of AC quality and audio/video performance, but unlike the QVIBE, the new QK1 achieves this by using an LRC furnished with Nordost’s patented Micro Mono-Filament technology. Using our MMF technology in a loading application prevents time delay and distortion of the transmitted signal, making the AC current that much closer to the desired “distortionless condition”. The Sensory results: an improvement in the overtones and pacing of the music as well as a greater sharpness, depth and focus of visual qualities. The QKOIL is the entry level product in the QRT range, a family of modular, non-intrusive innovations that deliver measurable sonic enhancements and provide power in the purist way. Like other QRT products, the benefits are cumulative and QK1s are even more impressive when applied collectively. It can be used as a “stand alone” product or to complement a full QRT system with QBASE-Mark II, QX4, QX2 and especially QV2 units.. The QK1 is housed in a mechanically tuned carbon-fiber body and equipped with either a US (NEMA) or EU (Schuko) connector. It is compatible with voltages from 110V to 240V, and can be used with an AUS or UK adaptor if required. Plug the QKOIL into any spare socket on your system’s AC Line and experience first-hand the surprising yet indisputable effect it will have on you’re A/V components. • Generates a passive electronic field • Allows for greater musicality and improves tonal balance • Increases clarity of imaging, including sharpness, depth and focus • Lowers the noise floor • Load resonating coil using patented Micro Mono-Filament technology • Mechanically tuned carbon-fiber body
Quick view
Add to compare
Add to wishlist

Nordost QRT 1

285.00€

Nordost QRT 1

Nordost QRT 1QK1 AC ENHANCER The QKOIL QK1 AC Enhancer uses a load resonating coil (LRC) to generate a passive electronic field that has a beneficial sonic effect on the AC current. Like the QV2, The QKOIL provides a vital solution to the issues of AC quality and audio/video performance, but unlike the QVIBE, the new QK1 achieves this by using an LRC furnished with Nordost’s patented Micro Mono-Filament technology. Using our MMF technology in a loading application prevents time delay and distortion of the transmitted signal, making the AC current that much closer to the desired “distortionless condition”. The Sensory results: an improvement in the overtones and pacing of the music as well as a greater sharpness, depth and focus of visual qualities. The QKOIL is the entry level product in the QRT range, a family of modular, non-intrusive innovations that deliver measurable sonic enhancements and provide power in the purist way. Like other QRT products, the benefits are cumulative and QK1s are even more impressive when applied collectively. It can be used as a “stand alone” product or to complement a full QRT system with QBASE-Mark II, QX4, QX2 and especially QV2 units.. The QK1 is housed in a mechanically tuned carbon-fiber body and equipped with either a US (NEMA) or EU (Schuko) connector. It is compatible with voltages from 110V to 240V, and can be used with an AUS or UK adaptor if required. Plug the QKOIL into any spare socket on your system’s AC Line and experience first-hand the surprising yet indisputable effect it will have on you’re A/V components. • Generates a passive electronic field • Allows for greater musicality and improves tonal balance • Increases clarity of imaging, including sharpness, depth and focus • Lowers the noise floor • Load resonating coil using patented Micro Mono-Filament technology • Mechanically tuned carbon-fiber body

Nordost QRT 1

Προσθήκη στο καλάθι
Quick view
Add to compare
Add to wishlist

Nordost QRT Qv2

405.00€

Nordost QRT Qv2

Nordost QRT Qv2

Προσθήκη στο καλάθι
Nordost Red Dawn interconnect The Red Dawn Interconnect represents the performance pinnacle of the Leif Series. This cable yields the best performance possible in an interconnect without using Micro Mono-Filament/TSC cable design. But despite its relatively conventional appearance there’s more to this cable than meets the eye. The Red Dawn Analog Interconnect uses a fully-shielded design that can be terminated for balanced or single-ended connection. It employs six, heavy-gauge 24 AWG, silver-plated 99.9999% OFC solid core conductors, precision wound in a minimum cross-section configuration that eliminates unnecessary fillers or padding elements.
Quick view
Add to compare
Add to wishlist

Nordost Red Dawn interconnect

,
Price range: 479.00€ through 759.00€

Nordost Red Dawn interconnect

Nordost Red Dawn interconnectThe Red Dawn Interconnect represents the performance pinnacle of the Leif Series. This cable yields the best performance possible in an interconnect without using Micro Mono-Filament/TSC cable design. But despite its relatively conventional appearance there’s more to this cable than meets the eye. The Red Dawn Analog Interconnect uses a fully-shielded design that can be terminated for balanced or single-ended connection. It employs six, heavy-gauge 24 AWG, silver-plated 99.9999% OFC solid core conductors, precision wound in a minimum cross-section configuration that eliminates unnecessary fillers or padding elements.

Nordost Red Dawn interconnect

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Nordost Spellbinder interconnect Spellbinder is an affordable, high-performance analog interconnect designed for use in any audio system. It uses 2 solid-core, silver-plated, OFC conductors with FEP insulation. This cable has a double layer of shielding, to reject RFI and electrical interference. It is handcrafted and finished with gold-plated RCA connectors. It offers excellent sound quality and detailed performance.
Quick view
Add to compare
Add to wishlist

Nordost Spellbinder interconnect

,
109.00€

Nordost Spellbinder interconnect

Nordost Spellbinder interconnectSpellbinder is an affordable, high-performance analog interconnect designed for use in any audio system. It uses 2 solid-core, silver-plated, OFC conductors with FEP insulation. This cable has a double layer of shielding, to reject RFI and electrical interference. It is handcrafted and finished with gold-plated RCA connectors. It offers excellent sound quality and detailed performance.

Nordost Spellbinder interconnect

Προσθήκη στο καλάθι
Nordost Superflatline speaker cable The SuperFlatline Speaker Cable is a true Nordost classic. This highly sought after product offers detail, clarity, and purity throughout the whole frequency spectrum, from subsonic lows to ultrasonic highs. The SuperFlatline Speaker Cable consists of sixteen 23 AWG, solid core, flat, rectangular, copper conductors. These conductors undergo an innovative precision FEP extrusion process, which lowers the capacitance and increases the bandwidth of the cable dramatically, enhancing accuracy and speed of signal transfer. This high quality, versatile cable can be used in any system. When used in a shotgun configuration, the SuperFlatline is capable of carrying high currents (up to 12.5 amps at 300 volts), while its 16 conductors can easily facilitate bi-wiring or bi-amping. In addition to the impressive quality of performance this cable can achieve, the flat geometry of SuperFlatline makes it possible to run lengths under carpets for easy and discreet installation.
Quick view
Add to compare
Add to wishlist

Nordost Superflatline speaker cable

,
Price range: 419.00€ through 539.00€

Nordost Superflatline speaker cable

Nordost Superflatline speaker cableThe SuperFlatline Speaker Cable is a true Nordost classic. This highly sought after product offers detail, clarity, and purity throughout the whole frequency spectrum, from subsonic lows to ultrasonic highs. The SuperFlatline Speaker Cable consists of sixteen 23 AWG, solid core, flat, rectangular, copper conductors. These conductors undergo an innovative precision FEP extrusion process, which lowers the capacitance and increases the bandwidth of the cable dramatically, enhancing accuracy and speed of signal transfer. This high quality, versatile cable can be used in any system. When used in a shotgun configuration, the SuperFlatline is capable of carrying high currents (up to 12.5 amps at 300 volts), while its 16 conductors can easily facilitate bi-wiring or bi-amping. In addition to the impressive quality of performance this cable can achieve, the flat geometry of SuperFlatline makes it possible to run lengths under carpets for easy and discreet installation.

Nordost Superflatline speaker cable

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Nordost TYR 2 speaker cable Norse 2 Series loudspeaker cables deliver a level of performance not previously possible at their price points. Nordost’s proprietary Micro Mono-Filament construction creates a virtual air dielectric complete with an elegantly engineered suspension system. When combined with silver-plated OFC solid core conductors and extruded, flat ribbon FEP insulation, the result is the ideal electrically and mechanically controlled construction for ultra-fast, low-loss signal transfer between amplifier and loudspeakers. Tyr 2 represents the top of the Norse 2 series. Combining natural dynamics with real world weight and scale, the results are spectacular without being hyped or exaggerated, allowing performances and recordings, as well as the electronics reproducing them, to deliver every last ounce of music that’s on the disc. With advanced mechanical tuning to aid the exceptional electrical performance of the Micro Mono-Filament construction, Tyr 2’s only competition comes from Nordost’s Reference ranges.
Quick view
Add to compare
Add to wishlist

Nordost TYR 2 speaker cable

,
Price range: 5,149.00€ through 9,399.00€

Nordost TYR 2 speaker cable

Nordost TYR 2 speaker cableNorse 2 Series loudspeaker cables deliver a level of performance not previously possible at their price points. Nordost’s proprietary Micro Mono-Filament construction creates a virtual air dielectric complete with an elegantly engineered suspension system. When combined with silver-plated OFC solid core conductors and extruded, flat ribbon FEP insulation, the result is the ideal electrically and mechanically controlled construction for ultra-fast, low-loss signal transfer between amplifier and loudspeakers. Tyr 2 represents the top of the Norse 2 series. Combining natural dynamics with real world weight and scale, the results are spectacular without being hyped or exaggerated, allowing performances and recordings, as well as the electronics reproducing them, to deliver every last ounce of music that’s on the disc. With advanced mechanical tuning to aid the exceptional electrical performance of the Micro Mono-Filament construction, Tyr 2’s only competition comes from Nordost’s Reference ranges.

Nordost TYR 2 speaker cable

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Nordost Tyr 2 USB The Tyr 2 USB 2.0 Cable is guaranteed to take your computer audio system to the next level. It implements a solid core design, which is essential when working with a cable of this caliber. This essential upgrade completely eliminates the negative effects of strand interaction and skin effect. Each of the four 20 AWG, solid core conductors is then wrapped in Nordost’s proprietary Dual Mono-Filament technology before being enclosed in extruded FEP, which lowers the capacitance of the cable, both increasing signal speed and bandwidth. The Tyr 2 USB 2.0 Cable arranges its conductors in a precise, twisted, double helix geometry in order to ensure characteristic impedance, minimize cross-talk, and reduce noise. To even further reduce noise, and protect the USB signal path from any external interference, Nordost employs a dual-layer, silver foil jacket and silver braided shield. Finally, before being terminated with gold-plated, fully shielded connectors, the Tyr 2 USB is cut to mechanically tuned lengths, which reduce internal microphonics and high-frequency impedance resonance. As with all Nordost products, the Tyr 2 USB 2.0 Cable is handmade in the USA, ensuring a high level of production quality and the extreme precision necessary to manufacture USB cables capable of overcoming jitter and timing errors. The Tyr 2 USB 2.0 Cable is the solution you need in order to achieve the superb sound staging, wide dynamic range, and precise timing you have been looking for in computer audio.
Quick view
Add to compare
Add to wishlist

Nordost Tyr 2 USB

,
Price range: 1,269.00€ through 2,339.00€

Nordost Tyr 2 USB

Nordost Tyr 2 USBThe Tyr 2 USB 2.0 Cable is guaranteed to take your computer audio system to the next level. It implements a solid core design, which is essential when working with a cable of this caliber. This essential upgrade completely eliminates the negative effects of strand interaction and skin effect. Each of the four 20 AWG, solid core conductors is then wrapped in Nordost’s proprietary Dual Mono-Filament technology before being enclosed in extruded FEP, which lowers the capacitance of the cable, both increasing signal speed and bandwidth. The Tyr 2 USB 2.0 Cable arranges its conductors in a precise, twisted, double helix geometry in order to ensure characteristic impedance, minimize cross-talk, and reduce noise. To even further reduce noise, and protect the USB signal path from any external interference, Nordost employs a dual-layer, silver foil jacket and silver braided shield. Finally, before being terminated with gold-plated, fully shielded connectors, the Tyr 2 USB is cut to mechanically tuned lengths, which reduce internal microphonics and high-frequency impedance resonance. As with all Nordost products, the Tyr 2 USB 2.0 Cable is handmade in the USA, ensuring a high level of production quality and the extreme precision necessary to manufacture USB cables capable of overcoming jitter and timing errors. The Tyr 2 USB 2.0 Cable is the solution you need in order to achieve the superb sound staging, wide dynamic range, and precise timing you have been looking for in computer audio.

Nordost Tyr 2 USB

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Nordost Tyr2 TYR 2 ANALOG INTERCONNECT Norse 2 Series interconnects deliver a level of performance not previously possible at their price points. Nordost’s proprietary Dual Mono-Filament construction, first introduced on the legendary Valhalla reference cables, creates a virtual air dielectric complete with an elegantly engineered suspension system. When combined with silver-plated OFC solid core conductors and FEP insulation throughout, the result is the ideal electrically and mechanically controlled construction for ultra-fast, low-loss signal transfer. Optimized conductor dimensions significantly extend the musical performance of the new Norse 2 Series, finally allowing your equipment to deliver its full performance potential, while the consistency of design and materials across the entire Norse 2 Series means that you can easily prioritize a system-wide solution without compromising the coherence of your cables.
Quick view
Add to compare
Add to wishlist

Nordost Tyr2

,
Price range: 2,669.00€ through 3,559.00€

Nordost Tyr2

Nordost Tyr2 TYR 2 ANALOG INTERCONNECT Norse 2 Series interconnects deliver a level of performance not previously possible at their price points. Nordost’s proprietary Dual Mono-Filament construction, first introduced on the legendary Valhalla reference cables, creates a virtual air dielectric complete with an elegantly engineered suspension system. When combined with silver-plated OFC solid core conductors and FEP insulation throughout, the result is the ideal electrically and mechanically controlled construction for ultra-fast, low-loss signal transfer. Optimized conductor dimensions significantly extend the musical performance of the new Norse 2 Series, finally allowing your equipment to deliver its full performance potential, while the consistency of design and materials across the entire Norse 2 Series means that you can easily prioritize a system-wide solution without compromising the coherence of your cables.

Nordost Tyr2

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Nordost Valhalla 2 speaker cable The Valhalla 2 Reference Speaker Cable consists of twenty-eight conductors divided into four groups of seven. Each conductor is made from solid core 99.999999% oxygen free copper and plated with 85 microns of silver. A Dual Mono-Filament wrap is applied and helically wound around each conductor before a precision FEP jacket is extruded over the outside. The transmission speed of the cable is extremely fast, at 97% the speed of light. V2 exemplifies state of the art technology with very wide bandwidth signals and minimum phase shift.
Quick view
Add to compare
Add to wishlist

Nordost Valhalla 2 speaker cable

,
Price range: 9,269.00€ through 19,999.00€

Nordost Valhalla 2 speaker cable

Nordost Valhalla 2 speaker cableThe Valhalla 2 Reference Speaker Cable consists of twenty-eight conductors divided into four groups of seven. Each conductor is made from solid core 99.999999% oxygen free copper and plated with 85 microns of silver. A Dual Mono-Filament wrap is applied and helically wound around each conductor before a precision FEP jacket is extruded over the outside. The transmission speed of the cable is extremely fast, at 97% the speed of light. V2 exemplifies state of the art technology with very wide bandwidth signals and minimum phase shift.

Nordost Valhalla 2 speaker cable

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Nordost VALHALLA 2 Tonearm Cable + In order to maximize the performance of an analog system, every aspect of your tonearm cable, including the conductor layout, quality of connectors, versatility in termination, and grounding capabilities, must be entirely optimized for its application. The Valhalla 2 Tonearm Cable + is the only cable on the market to excel at every one of these important design aspects, exceeding the performance requirements that high-quality analog replay requires.
Quick view
Add to compare
Add to wishlist

Nordost VALHALLA 2 Tonearm Cable +

,
Price range: 4,199.00€ through 4,699.00€

Nordost VALHALLA 2 Tonearm Cable +

Nordost VALHALLA 2 Tonearm Cable +In order to maximize the performance of an analog system, every aspect of your tonearm cable, including the conductor layout, quality of connectors, versatility in termination, and grounding capabilities, must be entirely optimized for its application. The Valhalla 2 Tonearm Cable + is the only cable on the market to excel at every one of these important design aspects, exceeding the performance requirements that high-quality analog replay requires.

Nordost VALHALLA 2 Tonearm Cable +

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Nordost VALHALLA2 VALHALLA2 ANALOG INTERCONNECT The Valhalla 2 Interconnect consists of 10 conductors made from solid, optimized diameter 99.999999% oxygen free copper, each plated with 85 microns of silver. Its surface is highly polished and treated before a precision Dual Mono-Filament wrap is applied. A precision FEP tube is then extruded over each conductor. The ten FEP tubes are then bonded with a proprietary technique to create a tubular interconnect cable, enclosed in two layers of silver shielding. The V2 interconnect is offered with either RCA or XLR HOLO:PLUG® connectors. V2 is extremely fast, at over 87% the speed of light. It transmits wide bandwidth signals with incredible speed and minimum phase shift. The V2 cable is state of the art, bettered only by the mighty Odin. It delivers incredible transient response and dynamic resolution so that no musical detail is lost. Each Valhalla 2 interconnect cable is hand built in the USA with HOLO:PLUG® RCA phono plugs or HOLO:PLUG® XLR connectors.
Quick view
Add to compare
Add to wishlist

Nordost VALHALLA2

,
Price range: 8,549.00€ through 10,939.00€

Nordost VALHALLA2

Nordost VALHALLA2VALHALLA2 ANALOG INTERCONNECT The Valhalla 2 Interconnect consists of 10 conductors made from solid, optimized diameter 99.999999% oxygen free copper, each plated with 85 microns of silver. Its surface is highly polished and treated before a precision Dual Mono-Filament wrap is applied. A precision FEP tube is then extruded over each conductor. The ten FEP tubes are then bonded with a proprietary technique to create a tubular interconnect cable, enclosed in two layers of silver shielding. The V2 interconnect is offered with either RCA or XLR HOLO:PLUG® connectors. V2 is extremely fast, at over 87% the speed of light. It transmits wide bandwidth signals with incredible speed and minimum phase shift. The V2 cable is state of the art, bettered only by the mighty Odin. It delivers incredible transient response and dynamic resolution so that no musical detail is lost. Each Valhalla 2 interconnect cable is hand built in the USA with HOLO:PLUG® RCA phono plugs or HOLO:PLUG® XLR connectors.

Nordost VALHALLA2

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Quick view
Add to compare
Add to wishlist

Nordost WonderSolder ασημοκόλληση

189.00€

Nordost WonderSolder ασημοκόλληση

Nordost WonderSolder ασημοκόλληση

Προσθήκη στο καλάθι
Nottingham Analogue Ace Spacedeck The 37mm platter is mounted onto its own chassis and runs on their bearing. The motor/pulley assembly is mounted in its own housing which sits separately from the turntable chassis, the only connection is the drive belt. This helps to avoid audio resonances being transferred through the chassis of the turntable. The Nottingham Analogue Ace Spacedeck looks exactly like the Spacedeck but has a few hidden extra features. The bronze bearing has the carbide/bushed type internal workings, the motor housing and arm base are manufactured from a heavy dense steel. All these features add greater stability to the turntable. Upgrade and colour options are the same as for the Spacedeck.
Quick view
Add to compare
Add to wishlist

Nottingham Analogue Ace Spacedeck

1,970.00€

Nottingham Analogue Ace Spacedeck

Nottingham Analogue Ace SpacedeckThe 37mm platter is mounted onto its own chassis and runs on their bearing. The motor/pulley assembly is mounted in its own housing which sits separately from the turntable chassis, the only connection is the drive belt. This helps to avoid audio resonances being transferred through the chassis of the turntable. The Nottingham Analogue Ace Spacedeck looks exactly like the Spacedeck but has a few hidden extra features. The bronze bearing has the carbide/bushed type internal workings, the motor housing and arm base are manufactured from a heavy dense steel. All these features add greater stability to the turntable. Upgrade and colour options are the same as for the Spacedeck.

Nottingham Analogue Ace Spacedeck

Προσθήκη στο καλάθι
Nottingham Analogue Horizon This turntable comes with our Interspace tonearm. Built onto a 50mm ‘ingot’ style chassis it has a 27mm alloy platter with a black acetal bearing which contains two internal bushes, this aids with the bearing oil circulation and adds stability, creating a lovely smooth running platter. Textured black finish ( colour options and / or gloss finish at extra cost ). After ten years, the Nottingham Analogue company decided to return to the production of the turntable, which made the small manufacture a brand recognized all over the world. This time the Nothingham Horizon turntable goes on sale with the 10-inch Interspace tonearm. The design is still based on an unusual, narrow, but quite thick and stiff chassis, which perfectly damps all vibrations. The device is also distinguished by an excellent plate, which is a cast iron. Cast iron, apart from its large mass, has a very unique feature, namely it is a material that perfectly damps all vibrations and vibrations. These features, as well as an atypical AC synchronous motor, make these turntables stand out with excellent sound resolution and exceptional calmness and culture of presentation. Additionally, the set with the turntable comes with a special anti-vibration base.
Quick view
Add to compare
Add to wishlist

Nottingham Analogue Horizon

1,590.00€

Nottingham Analogue Horizon

Nottingham Analogue HorizonThis turntable comes with our Interspace tonearm. Built onto a 50mm ‘ingot’ style chassis it has a 27mm alloy platter with a black acetal bearing which contains two internal bushes, this aids with the bearing oil circulation and adds stability, creating a lovely smooth running platter. Textured black finish ( colour options and / or gloss finish at extra cost ). After ten years, the Nottingham Analogue company decided to return to the production of the turntable, which made the small manufacture a brand recognized all over the world. This time the Nothingham Horizon turntable goes on sale with the 10-inch Interspace tonearm. The design is still based on an unusual, narrow, but quite thick and stiff chassis, which perfectly damps all vibrations. The device is also distinguished by an excellent plate, which is a cast iron. Cast iron, apart from its large mass, has a very unique feature, namely it is a material that perfectly damps all vibrations and vibrations. These features, as well as an atypical AC synchronous motor, make these turntables stand out with excellent sound resolution and exceptional calmness and culture of presentation. Additionally, the set with the turntable comes with a special anti-vibration base.

Nottingham Analogue Horizon

Προσθήκη στο καλάθι
Nottingham Analogue Interspace Junior The Nottingham Interspace Junior is Nottingham Analogue Studio's entry level turntable solution. This table is anything but that when compared to the world at large. The Interspace table shares many of the same attributes as its larger and more costly siblings. Mated with Nottingham's own 9" Interspace tonearm and tonearm combination, this table is ready to play music. This turntable also comes with the Nottingham Interspace tonearm. A conventional style turntable the components are built onto the 50mm plinth. It has a 37mm alloy platter with our classic bronze bearing. Textured black finish (colour options and/or gloss finish at extra cost).
Quick view
Add to compare
Add to wishlist

Nottingham Analogue Interspace Junior

1,720.00€

Nottingham Analogue Interspace Junior

Nottingham Analogue Interspace JuniorThe Nottingham Interspace Junior is Nottingham Analogue Studio's entry level turntable solution. This table is anything but that when compared to the world at large. The Interspace table shares many of the same attributes as its larger and more costly siblings. Mated with Nottingham's own 9" Interspace tonearm and tonearm combination, this table is ready to play music. This turntable also comes with the Nottingham Interspace tonearm. A conventional style turntable the components are built onto the 50mm plinth. It has a 37mm alloy platter with our classic bronze bearing. Textured black finish (colour options and/or gloss finish at extra cost).

Nottingham Analogue Interspace Junior

Προσθήκη στο καλάθι
Nottingham Analogue Spacedeck One of Nottingham Analogue's most popular turntables. The 37mm platter is mounted onto its own chassis and runs on their classic bronze bearing. The motor/pulley assembly is mounted in its own housing which sits separately from the turntable chassis, the only connection is the drive belt. This helps to avoid audio resonances being transferred through the chassis of the turntable.
Quick view
Add to compare
Add to wishlist

Nottingham Analogue Spacedeck

1,590.00€

Nottingham Analogue Spacedeck

Nottingham Analogue SpacedeckOne of Nottingham Analogue's most popular turntables. The 37mm platter is mounted onto its own chassis and runs on their classic bronze bearing. The motor/pulley assembly is mounted in its own housing which sits separately from the turntable chassis, the only connection is the drive belt. This helps to avoid audio resonances being transferred through the chassis of the turntable.

Nottingham Analogue Spacedeck

Προσθήκη στο καλάθι
OCTAVIO STREAM
Quick view
Add to compare
Add to wishlist

OCTAVIO STREAM

,
180.00€

OCTAVIO STREAM

Αποκτήστε πρόσβαση σε υπηρεσίες ροής όπως Deezer, Qobuz, Spotify, Tidal, Apple Music, Amazon Music απλά και “οικονομικά” με το OCTAVIO STREAM. Το OCTAVIO υποστηρίζει όλες τις δημοφιλείς πλατφόρμες streaming και online radio stations.

OCTAVIO STREAM

OCTAVIO STREAM

Προσθήκη στο καλάθι
OKKI NOKKI RECORD CLEANING MACHINES
Quick view
Add to compare
Add to wishlist

OKKI NOKKI RECORD CLEANING MACHINES

550.00€

OKKI NOKKI RECORD CLEANING MACHINES

OKKI NOKKI RECORD CLEANING MACHINES

OKKI NOKKI RECORD CLEANING MACHINES

Προσθήκη στο καλάθι
The 2M Black is the flagship of the series, and it lives up to this with flying colors. You can hear every little detail in the music from every part of the spectrum. Just the way the artist wanted you to. This is for those who want to sense the presence of the artist in the room when they listen to their records. Stylus The 2M Black is graced with a Shibata diamond that gives it contact with the groove like nothing else. The slim, highly polished profile allows an exceedingly wide contact area to the groove walls and ensures notably detailed reproduction throughout the spectrum, including even the most high frequency groove information.
Quick view
Add to compare
Add to wishlist

Ortofon 2M Black

,
589.00€

Ortofon 2M Black

The 2M Black is the flagship of the series, and it lives up to this with flying colors. You can hear every little detail in the music from every part of the spectrum. Just the way the artist wanted you to. This is for those who want to sense the presence of the artist in the room when they listen to their records.Stylus The 2M Black is graced with a Shibata diamond that gives it contact with the groove like nothing else. The slim, highly polished profile allows an exceedingly wide contact area to the groove walls and ensures notably detailed reproduction throughout the spectrum, including even the most high frequency groove information.

Ortofon 2M Black

Προσθήκη στο καλάθι
The 2M Bronze is designed to give the music a whole new dimension of precision. Listening to your records with the 2M Bronze is like hearing them for the first time, and you get to fall in love with the songs all over again. That is what hi-fi means to us, and that is what you get with the 2M Bronze.
Quick view
Add to compare
Add to wishlist

Ortofon 2M Bronze

,
349.00€

Ortofon 2M Bronze

The 2M Bronze is designed to give the music a whole new dimension of precision. Listening to your records with the 2M Bronze is like hearing them for the first time, and you get to fall in love with the songs all over again. That is what hi-fi means to us, and that is what you get with the 2M Bronze.

Ortofon 2M Bronze

Προσθήκη στο καλάθι
The Ortofon Cadenza Black model is using a Nude Shibata stylus with a boron cantilever. The effective mass of the stylus/cantilever system is extremely low due to the use of a very thin boron rod. This material is extremely stiff and even more lightweight than aluminium. It also uses the WRD/Wide Range Damping-system applied for MC Windfeld, MC A90, MC Anna, Xpression and MC A95 cartridges, controlling the high and low frequency damping separately. The coil wire is the famous Ortofon Aucurum wire, which is a gold plated 6NX copper wire. Cadenza Black is high performing on areas like detail, consistency and sound staging.
Quick view
Add to compare
Add to wishlist

Ortofon Cadenza Black

,
2,849.00€

Ortofon Cadenza Black

The Ortofon Cadenza Black model is using a Nude Shibata stylus with a boron cantilever. The effective mass of the stylus/cantilever system is extremely low due to the use of a very thin boron rod. This material is extremely stiff and even more lightweight than aluminium. It also uses the WRD/Wide Range Damping-system applied for MC Windfeld, MC A90, MC Anna, Xpression and MC A95 cartridges, controlling the high and low frequency damping separately. The coil wire is the famous Ortofon Aucurum wire, which is a gold plated 6NX copper wire.Cadenza Black is high performing on areas like detail, consistency and sound staging.

The Ortofon Cadenza Black model is using a Nude Shibata stylus with a boron cantilever. Also uses WRD/Wide Range Damping-system and Ortofon Aucurum wire

Προσθήκη στο καλάθι
Το μοντέλο Ortofon Cadenza Blue χρησιμοποιεί γραφίδα Nude FG 70 με πολύ λεπτό πρόβολο από ρουμπίνι. Τα πηνία είναι κατασκευασμένα από σύρμα καθαρού ασημιού 6NX (99,9999 %). Μια βελτιωμένη διαδικασία περιέλιξης στον οπλισμό επιτρέπει καλύτερη ισορροπία καναλιού.
Quick view
Add to compare
Add to wishlist

Ortofon Cadenza Blue

,
1,749.00€

Ortofon Cadenza Blue

Το μοντέλο Ortofon Cadenza Blue χρησιμοποιεί γραφίδα Nude FG 70 με πολύ λεπτό πρόβολο από ρουμπίνι. Τα πηνία είναι κατασκευασμένα από σύρμα καθαρού ασημιού 6NX (99,9999 %).Μια βελτιωμένη διαδικασία περιέλιξης στον οπλισμό επιτρέπει καλύτερη ισορροπία καναλιού.

Ortofon Cadenza Blue with Nude FG 70 stylus with a very thin ruby cantilever and pure silver wire coils

Προσθήκη στο καλάθι
Ortofon Cadenza Bronze stereo imaging capabilities illuminate the farthest corners of the soundstage in all three dimensions. Cadenza Bronze is a true high-end reference cartridge, conveying music with supreme precision, impact and dynamics. The Cadenza Bronze model is using a Replicant 100 stylus and a conical aluminium cantilever. The coil wire is the famous Ortofon Aucurum wire, which is a gold plated 6NX copper wire. Field Stabilizing Element/FSE, is used for optimal linearity especially during complex crescendo passages.
Quick view
Add to compare
Add to wishlist

Ortofon Cadenza Bronze

,
2,149.00€

Ortofon Cadenza Bronze

Ortofon Cadenza Bronze stereo imaging capabilities illuminate the farthest corners of the soundstage in all three dimensions. Cadenza Bronze is a true high-end reference cartridge, conveying music with supreme precision, impact and dynamics.The Cadenza Bronze model is using a Replicant 100 stylus and a conical aluminium cantilever. The coil wire is the famous Ortofon Aucurum wire, which is a gold plated 6NX copper wire. Field Stabilizing Element/FSE, is used for optimal linearity especially during complex crescendo passages.

Ortofon Cadenza Bronze features Replicant 100 stylus the famous Ortofon Aucurum wire and Field Stabilizing Element/FSE

Προσθήκη στο καλάθι
The Ortofon Cadenza Red model is using a Nude Fine Line stylus with a cylindrical aluminium cantilever. The stylus tip radius is r/R 8/40 µm.The coils are made from 6NX (99.9999 %) pure silver wire.An improved winding process on the armature allows a better channel balance.
Quick view
Add to compare
Add to wishlist

Ortofon Cadenza Red

,
1,249.00€

Ortofon Cadenza Red

The Ortofon Cadenza Red model is using a Nude Fine Line stylus with a cylindrical aluminium cantilever. The stylus tip radius is r/R 8/40 µm.The coils are made from 6NX (99.9999 %) pure silver wire. An improved winding process on the armature allows a better channel balance.

Ortofon Cadenza Red features a Nude Fine Line stylus and silver wire coils

Προσθήκη στο καλάθι