Shop - Nexus Acoustics - HiFi End Συστήματα Ηχου

Dali Rubicon 8

6,598.00€

Dali Rubicon 8

Επιλογή

ATC ATC SCM19A Overview New ATC designed and built dual suspension 25mm soft dome HF unit with precision alloy wave guide. “SL” spec bass driver with 75mm integral Soft Dome. 9kg optimised short-coil/long gap motor assembly. On-board grounded source 182 watt Class A/B Bi-amplifier. Active crossover filters and overload protection. Veneered Finish Options – Cherry, Black Ash. Painted Finish Options – Satin Black, Satin White. 6 year warranty.

Quick view

ATC SCM19A

ΗΧΕΙΑ, Ενεργά αυτοενισχυόμενα ηχεία

6,700.00€

ATC SCM19A

ATC SCM19A active floorstanding speaker

Επιλογή

-3%

Quick view

Denon AVC-A1H

ΕΝΙΣΧΥΤΕΣ, Ολοκληρωμένοι ενισχυτές

Denon AVC-A1H

Επιλογή

Audio Note AN-J-LX Details The majority of the high-end audio marketplace is occupied by ill-conceived low efficiency loudspeaker systems. These designs usually consist of several less-than-ideally matched drivers and a very complex crossover, crammed into a cabinet that exhibits the tonal and textural qualities of reinforced concrete. Their designers are blinded by the dogmatic quest for high sound pressure levels and flat response. But what of the other factors which are essential for emotionally involving music reproduction? What about coherence, full natural micro—as well as macro—dynamics, inner detail? What about LIFE? What about EMOTION? Sorry, they’re just not part of the “High Performance Audio” design brief. And music suffers for it. The design of the AN-J Loudspeaker, by contrast, follows an altogether different philosophy. It calls for a cabinet that complements the chosen drive units, rather than fighting against them. Instead of trying to kill the resonances, we tailor the cabinet to place them in frequency bands where they aid and enhance the operation of the drive units, culminating in a loudspeaker system that makes the most of the preceding amplifier’s output. The material choice for the cabinet is an area where a great deal of research and development has taken place. Over the years, we have tried many different materials and combinations, a time consuming endeavour culminating in the current design, which utilises the highest quality birch ply for the entire cabinet. Bracing and internal damping is kept to a minimum and strategically applied to help, not hinder the drivers. The ported cabinet has been designed to be placed close to room boundaries, where the bass performance is augmented significantly by the additional reinforcement offered by the nearby walls. In this position, it will outperform any similarly sized speaker regardless of origin, thanks in part to the shallow cabinet / wide baffle shape which gives the drivers the best possible operating conditions, allowing them to perform as if they are mounted in a virtual wall. This provides the most undisturbed sound field with the widest and most even dispersion possible from a real world cabinet shape. The crossover is simple, essentially first order, hardwired and incorporates air-cored chokes and selected bipolar and polypropylene capacitors (either copper foil or silver foil, depending on model). The internal cabling consists of either 99.99% pure copper or 99.99% pure silver Audio Note (UK) wire, depending on the exact model. (See specifications.) Consistent performance is a major issue in loudspeaker design and unfortunately all drive units vary slightly from each other, even if they look the same and have the same basic specification. Many loudspeaker manufacturer’s will tell you that they provide “computer matched” crossovers, and whilst this may be true in one sense (each crossover may have been matched to have the exact same capacitance, inductance and resistance) this essentially “passive” method does not adequately take into consideration the mechanical and acoustic variance present in the drive units themselves, where minute differences in acoustic behaviour will result in quite substantial differences in performance and sound. Therefore, to obtain the best possible combination of drivers and crossovers, we have developed a dynamic matching process. This ensures that each loudspeaker in a stereo pair matches a "master curve" and also its partner, to within 0.4dB. To the best of our knowledge, no other loudspeaker manufacturer achieves such close matching and tests 100% of its production. Another much overlooked area of loudspeaker design is the material choice for the drivers. It has become very fashionable to use all manner of exotic materials (beryllium, diamond, carbon fibre, ceramics etc.) as cone materials in modern drivers, mainly because it gives the impression that the manufacturer in question is making great strides in their research into better sounding speakers. The sad fact is none of these materials work as intended, as they all have their own distinct sonic signature, so no matter how the crossover is designed, this sonic signature will be present when the speaker reproduces music. It may be less obvious and audible with some types of music, but ultimately the chosen material will always imprint some of its own signature on whatever sound is reproduced. In addition, it is vitally important that the sound and characteristics of an individual drive unit are complimentary to those of its chosen partner, so that when an instrument is reproduced by both drive units (which is almost always the case), the upper range does not sound detached from the lower range and vice versa. This is an aspect of performance that cannot be measured by even the most sophisticated test equipment; it can ONLY be judged by listening. We at Audio Note are keenly aware of this and have deliberately chosen drive units whose sonic signatures are as closely matched as possible. This has led us to favour good, old fashioned paper and Hemp paper for the woofer cone and impregnated silk for the dome tweeter. These materials, when matched correctly, marry the low and high frequencies seamlessly, providing the best level of performance possible in the real world of acoustics.

Quick view

Audio Note AN-J-LX

ΗΧΕΙΑ, ηχεία βάσης και βιβλιοθήκης

6,790.00€

Audio Note AN-J-LX

Quick view

YAMAHA NS-2000A

6,800.00€

YAMAHA NS-2000A

Monitor Audio Gold 500 6G The flagship Gold 500 6G is engineered to deliver the very highest levels of performance. It features the latest MPD III high-frequency transducer alongside an HDT, C-CAM 3-inch mid-driver and twin 8-inch bass drivers. The Gold 500 6G is the flagship model of the new Gold Series 6G. It represents the highest-levels of performance and system design at the price point, and within this competitive market segment. Designed to house the latest MPD III high-frequency transducer alongside the new 3-inch mid-driver and powerful twin 8-inch bass drivers, each of which benefit from the latest HDT, C-CAM cone technology and hugely powerful motor systems. The Gold 500 6G is a worthy flagship for such a prestigious range; a formidable acoustic treat for the ears as well as the eyes.

Quick view

Monitor Audio Gold 500 6G

6,860.00€

Monitor Audio Gold 500 6G

Επιλογή

Quick view

Rosso Florentino Certaldo S2

6,930.00€

Rosso Florentino Certaldo S2

2,5 δρόμων bass reflex με πίσω και κάτω οπή εκτόνωσης

Ηχεία με ευαισθησία 88 db/W/m

Μέση αντίσταση 8 Ω min με την χαμηλότερη αντίσταση του ηχείου να πέφτει στα 5 Ω

Απόκριση 40Hz -3db έως και 30 KHZ

Rosso Florentino Certaldo S2

PRO-JECT X-TENSION 12 Evolution-Ortofon AS-309S. Χειροκίνητο πικάπ με ενσωματωμένο Pro-Ject Speed Box SE και βραχίονα Ortofon AS-309S

Quick view

PRO-JECT X-TENSION 12 Evolution-Ortofon AS-309S

ΠΙΚΑΠ

6,949.00€

PRO-JECT X-TENSION 12 Evolution-Ortofon AS-309S

PRO-JECT X-TENSION 12 Evolution-Ortofon AS-309S.

Quick view

THIVAN LABS Swan 211 Integrated Amp

ΕΝΙΣΧΥΤΕΣ, Ολοκληρωμένοι ενισχυτές

6,950.00€

THIVAN LABS Swan 211 Integrated Amp

THIVAN LAB Swan 211 Headphones & Speakers Integrated Amp.

Ολοκληρωμένος ενισχυτής λυχνίας με τις περίφημες 211 σε καθαρή τάξη Α και τοπολογία single ended με έξοδο 25 W ανά κανάλι. Ο ενισχυτής λειτουργεί και σαν ενισχυτής ακουστικών.

THIVAN LABS Swan 211 Integrated Amp

Quick view

THIVAN LABS SWAN 211 SE integrated amp.

ΕΝΙΣΧΥΤΕΣ, Ολοκληρωμένοι ενισχυτές

6,950.00€

THIVAN LABS SWAN 211 SE integrated amp.

Ολοκληρωμένος ενισχυτής λυχνίας με λυχνίες 211 σε καθαρή τάξη Α τοπολογία single ended με έξοδο 25 W ανά κανάλι.

THIVAN LABS SWAN 211 SE integrated amp.

Quick view

PMC twenty5.24i

6,950.00€

PMC twenty5.24i

Επιλογή

ATC C4CA Suitable substitution for C6CA centre channel in C6 systems where space is restricted. Twin ATC 150mm SL mid/bass drivers. Massive 9kg shielded motor assemblies. In-house, hand wound precision flat wire coils. ATC 250 Watt Class A (to 2/3 max power). Active filters and overload. 6 Year warranty. Any veneer to order. Featured veneer: Rosewood.

Quick view

ATC C4CA

ΗΧΕΙΑ, Ενεργά αυτοενισχυόμενα ηχεία

6,970.00€

ATC C4CA

ATC C4CA hi end active center speaker

Quick view

YAMAHA C-5000

ΕΝΙΣΧΥΤΕΣ, ΠΡΟΕΝΙΣΧΥΤΕΣ

6,990.00€

YAMAHA C-5000

Επιλογή

Quick view

YAMAHA M-5000

ΕΝΙΣΧΥΤΕΣ, ΤΕΛΙΚΟΙ ΕΝΙΣΧΥΤΕΣ

6,990.00€

YAMAHA M-5000

Επιλογή

-7%

Quick view

BRYSTON 3B Cubed

ΕΝΙΣΧΥΤΕΣ, ΤΕΛΙΚΟΙ ΕΝΙΣΧΥΤΕΣ

BRYSTON 3B Cubed

BRYSTON 3B Cubed .

New

J.Sikora Turntables Aspire Linear p.s The ASPIRE turntable is the new entry point into the J.Sikora turntable line. Its construction retains the J.Sikora’s design philosophies and the trickle down of key technologies from the upper-end tables. The ASPIRE is characterized by exceptional speed stability, isolation from external resonances, and the sound that has made J.Sikora turntables so beloved around the world. It is now time to Step Up to a J.Sikora with the Aspire turntable. Aspire (deck only, including linear power supply)

Quick view