Ortofon SPU Meister Silver G MkII
€1,699.00
Ortofon SPU Meister Silver G MkII

Ortofon SPU Meister Silver G MkII
Διαθέσιμο κατόπιν παραγγελίας
Περιγραφή
Ortofon SPU Meister Silver G MkII

Ortofon SPU Meister Silver G MkII
Η Ortofon SPU Meister Silver G MkII έχει βελτιωθεί σε υλικό περιέλιξης πηνίου, βελόνα και μαγνήτη. Το αριστούργημα του κ. Robert Gudmandsen, η κεφαλή κινητού πηνίου SPU Meister Silver παρουσιάστηκε το 1996 ως μια τεχνολογική βελτίωση μεγάλης σημασίας. Η Ortofon πέτυχε να έχει το πιο καθαρό ασημένιο σύρμα που έχει παραχθεί ποτέ για τη διαδικασία περιέλιξης πηνίου.
Ortofon SPU Meister Silver G MkII
The Ortofon SPU Meister Silver G MkII has been improved on coil winding material, stylus, and magnet. The masterpiece of Mr. Robert Gudmandsen, the SPU Meister Silver was introduced in 1996 as a technological improvement of great importance. Ortofon has succeeded in having the purest silver wire ever produced for the coil winding process.
The SPU Meister Silver GM MkII has been improved on coil winding material, stylus and magnet.
The cartridge has been outfitted with high purity multi-conductor 6–nines Silver wire (of a purity of 99,9999 %) for a more open and revealing high end presentation.
The nude elliptical stylus tip mass has been decreased by a factor of more than 50%, resulting in increased tracking ability and reproduction of microdynamic detail.
The generator system has been revised to produce a slightly higher output to ensure compatibility with a wider range of moving coil transformers and active MC preamplifiers.
Ortofon SPU Meister Silver G MkII Technical data
Output voltage at 1000 Hz 5cm/sec – 0,3 mV
Channel balance at 1 kHz < 1 dB
Channel separation at 1 kHz > 20 dB
Channel separation at 15 kHz > 10 dB
Frequency response 20 – 20 kHz +2/-1 dB
Tracking ability at 315 Hz at recommended tracking force *) > 70 μm
Compliance, dynamic, lateral – 8 μm/mN
Stylus type – Nude elliptical
Stylus tip radius – r/R 8/18 μm
Tracking force range – 3.0-5.0 g (30-50 mN)
Tracking force recommended – 4.00 g (40 mN)
Tracking angle – 20º
*) Typical value
Internal impedance, DC resistance – 3 ohm
Recommended load impedance > 10 ohm
Coilwire material – Silver, 6-nines
Cartridge body material – Ground wood and resin composite
Cartridge colour – Shiny black
Cartridge Weight – 30 gram
Δείτε εδώ τα υπόλοιπα προϊόντα μας.
Δείτε προσφορές στο BLOGSPOT μας
Επιπλέον πληροφορίες
Brand |
ORTOFON |
---|
Μόνο συνδεδεμένοι πελάτες που έχουν αγοράσει αυτό το προϊόν μπορούν να αφήσουν μία αξιολόγηση.


ΤΡΟΠΟΙ ΠΑΡΑΔΟΣΗΣ
- Η παράδοση των προϊόντων μετά τη συλλογή τους από την Nexus Acoustics, πραγματοποιείται σε διάστημα 1-3 εργάσιμων ημερών.
- Παραλαβή από την έδρα μας κατόπιν επικοινωνίας.
- Αποστολή με Courier με επιπλέον χρέωση για παραγγελίες έως 100€ & έως 2,00 kg. και δωρεάν για την Ελλάδα σε μεγαλύτερα ποσά και μικρού όγκου δέματα (έως 2,00 kg)
- Οι αποστολές για δυσπρόσιτες περιοχές γίνονται στο πλησιέστερο Γραφείο της συνεργαζόμενης Courier.
- Για ογκώδη αντικείμενα (Ηχεία, Ενισχυτές κλπ) η αποστολή γίνεται με Μεταφορική Εταιρεία κατόπιν συνεννόησης και ανάλογα τον προορισμό.
> Δείτε περισσότερα σχετικά με τις παραδόσεις
Σχετικά προϊόντα
Audio-Technica AT-OC9XSL
Audio-Technica VM540ML
Audio-Technica VM740ML
Audio-Technica VM750SH
Dynavector DRT XV1-T
Dynavector DRT XV1-T
Principal Improvements of the Dynavector DRT XV1-T The unique square shaped armature manufactured from a carefully selected material that is both corrosion resistant and impervious to age deterioration. 16 micron coil windings that only Dynavector can manufacture are wound around square shaped armature to match the square shaped hole in front yoke. Alnico column magnets to stabilize the magnetic circuits and increase linearity of the magnetic distribution within the air gap. urushi bamboo of XV-1t MC CartridgeStylus of XV-1t MC CartridgeCoil bobin of XV-1t MC Cartridge Other features Exclusive Walnut case.
Dynavector DRT XV1-T
Dynavector Karat DV-17DX
Dynavector Karat DV-17DX
Κεφαλή MC χαμηλής εξόδου 0.3mV με απολύτως flat απόκριση συχνότητας από 20 έως και 20,000Hz. Η Karat DV-17DX έχει σώμα από μασίφ μπρούτζο, Samarium-cobalt μαγνήτες για ακόμα μικρότερη μαγνητική αντίσταση και απίστευτα μικρό - 1.7mm - Diamond cantilever που καταλήγει σε βελόνα Micro Ridge. Η κατασκευή της DV-17DX εξασφαλίζει απαράμιλλη αναπαραγωγή των αναλογικών εγγραφών τοσο στα χαμηλά και χαμηλομεσαία όσο και στα μεσαιουψηλά και ψηλά χωρίς την παραμικρή σκληράδα.
Dynavector Karat DV-17DX
Dynavector Te Kaitora Rua
Dynavector DRT XV1-S Te Kaitora Rua
Η original κεφαλή Te Kaitora ήταν αποτέλεσμα της συνεργασίας μεταξύ Dynavector Japan και Dynavector New Zealand. Η Te Kaitora τότε είχε επιτρέψει στους φίλους του βινυλίου να ταξιδέψουν στα μακρύτερα σύνορα της αναλογικής αναπαραγωγής. Η βελτιωμένη Te Kaitora Rua συνεχίζει την παράδοση αυτή ενσωματώνοντας τεχνολογίες από τις XV-1s και XX-2. Η Rua όμως με αυτές τις βελτιώσεις κατόρθωσε να ξεπεράσει ακόμα και τις μεταξένιες και ανοιχτές ψηλές της ορίτζιναλ Te Kaitora..
Dynavector Te Kaitora Rua
GOLD NOTE DONATELLO RED High MC
GOLD NOTE DONATELLO RED High MC
Η GOLD NOTE DONATELLO RED είναι μια κεφαλή MC υψηλής εξόδου που με τα 1,8 mV output οδηγείται από ένα απλό mm phono προσφέροντας όμως την μαγεία των κεφαλών κινητού πηνίου. Είναι κατασκευασμένη από ένα μασίφ κομμάτι Duraluminium alloy, έχεο μαγνήτες Samarium-Cobalt ενώ διαθέτει εξαιρετικό διαχωρισμό καναλιών που είναι μεγαλύτερος από 24dB. Επιπλέον με την Micro Elliptical βελόνα ανασύρει όλη την πληροφορία που διαβάζει στα αυλάκια των δίσκων σας με πολύ μικρό θόρυβο επιφανείας.
Inspired by a challenge, empowered by technology. The idea behind the new DONATELLO MC cartridge was to engineer the best sounding cartridge with solid machined aluminium body, light enough to be handled by every tone-arms. The results exceeded expectations. After two years of continuous research, here is DONATELLO: a sophisticated, computer designed body made of machined aluminium. Weighing only 7gram, it's perfectly damped and firmly blocked to help the cantilever achieve the best tracking. DONATELLO's ultra rigid cantilever handles a high precision Micro Elliptical diamond exclusively developed in collaboration with Adamant-Namiki and designed for top audio performance. As our flagship cartridges, Donatello's diamond tip is mechanically inserted and blocked into a long, stiffened aluminium cantilever, handled in a special titanium telescopic pipe to increase structural rigidity. There's more: like our top models, DONATELLO features long gold-plated pin connectors designed to connect perfectly with arm cinches, reducing energy dispersion and improving grounding for an ideal music background that will let you enjoy even the smaller details in your music. DONATELLO Series feature high internal impedance levels, so that they can be easily matched with any active phono preamp MM and even correctly set-up MC ones, without the need of any Step-Up transformer .
GOLD NOTE DONATELLO RED High MC
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.