Shop - Nexus Acoustics - HiFi End Συστήματα Ηχου

ATC SIA 2 150 MkII

ΕΝΙΣΧΥΤΕΣ, Ολοκληρωμένοι ενισχυτές

4,999.00€

ATC SIA 2 150 MkII

ATC SIA 2 150 MkII Stereo Integrated Amplifier

Overview

Combining the discrete preamp circuits from the high-end SCA2 preamplifier and ATCs renowned MOSFET class A/B power amplifiers, the SIA2-150 offers power and precision to the discerning music fan who wants a simple all-analogue solution to drive their passive loudspeakers.

ATC SIA 2 150 MkII

Quick view

KEF R7 Meta

ΗΧΕΙΑ, ηχεία δαπέδου

4,998.00€

KEF R7 Meta

Επιλογή

Quick view

To Klipsch Heresy IV πρωτοπαρουσιάστηκε το 1957 σαν κεντρικό ηχείο συνοδό του Klipschorn σε συστήματα τρικάναλα στερεοφωνικά. Το Klipsch Heresy IV όμως έκανε καριέρα καθώς παρουσιάζει εξαιρετική ποιότητα ήχου για το μέγεθος του. Το Klipsch Heresy IV έρχεται με νέα μονάδα μεσαίων συχνοτήτων φόρτισης κόρνας με διάφραγμα polyimide εξασφαλίζοντας εξαιρετική λεπτομέρεια στην αναπαραγωγή των μεσαίων. Για πρώτη φορά το Heresy αποκτά rear port για μεγαλύτερη έκταση χαμηλών συχνοτήτων χωρίς την ενοχλητική “ανάσα” των μπροστινών port. Το Klipsch Heresy IV διαθέτει μονάδα υψηλών συχνοτήτων τιτανίου με phase plug για μεγαλύτερη διασπορά των υψηλών συχνοτήτων. Τα ηχεία είναι διαθέσιμα σε Satin Black Ash, Natural Cherry, Distressed Oak, or American Walnut wood veneer finish και είναι σχεδιασμένα και κατασκευασμένα στις Ηνωμένες Πολιτείες.

Klipsch Heresy IV

Quick view

GOLDNOTE A3 EVO II

ΗΧΕΙΑ, ηχεία βάσης και βιβλιοθήκης

4,990.00€

GOLDNOTE A3 EVO II

Quick view

Velodyne DD-12+

SUBWOOFER

4,990.00€

Velodyne DD-12+

Quick view

MELODY PURE BLACK 101

ΠΡΟΕΝΙΣΧΥΤΕΣ

4,990.00€

MELODY PURE BLACK 101

MELODY PURE BLACK 101 tube preamplifier

Ένας εξαιρετικός προενισχυτής με 4x6SN7 από την MELODY. O Pure Black 101 είναι ένα οριακά σχεδιασμένο κύκλωμα με ανόρθωση GZ-34 DHT & σταθεροποίηση τάσης με 2 λυχνίες 101D DHT. Εξαιρετικά γραμμικός με υψηλή πιστότητα στην απόδοση των ηχογραφήσεων, μακράν των solid state και των απλών λαμπάτων προενισχυτών. Οδηγεί και αναδεικνύει τις ικανότητες των solid state τελικών ενισχυτών ανεβάζοντας κατακόρυφα την απόδοση τους. Ο Pure Black 101 είναι μια hard wired κατασκευή με υψηλής ποιότητας υλικά και πυκνωτές σήματος copper foil in oil. Dual mono κατασκευή με εντελώς ξεχωριστές τροφοδοσίες. Εξαιρετικά ήσυχος και σταθερός σε απόδοση, είναι από τους καλύτερους προενισχυτές που έχουμε ακούσει ποτέ !!

2 Έξοδοι RCA High & Low. Διακοπτικό ποτενσιόμετρο. HARD WIRED.

MELODY PURE BLACK 101

-14%

Quick view

JJ ELECTRONICS 322 300B S.E.T

ΕΝΙΣΧΥΤΕΣ, Ολοκληρωμένοι ενισχυτές

JJ ELECTRONICS 322 300B S.E.T

JJ 322 300B Single Ended Tube Amplifier

Ολοκληρωμένος ενισχυτής με δυο 300B ανά κανάλι σε τοπολογία Parallel Single Ended και σε καθαρή τάξη Α’ με διπλούς C-core μετασχηματιστές εξόδου! Τεράστια ρεύματα σε σχεδίαση Dual mono με απαράμιλλη ηχητική ποιότητα. Άριστη ποιότητα κατασκευής. Zero Feedback. Μηδενικός θόρυβος!

JJ ELECTRONICS 322 300B S.E.T

Quick view

CHORD ELECTRONICS HUGO TT 2

CD PLAYER - DAC, DAC

4,960.00€

CHORD ELECTRONICS HUGO TT 2

Επιλογή

MoonRiver Audio Model-404 Reference The MoonRiver Audio Model-404 Reference is a remote-controlled two-channel integrated amplifier (in Dual Mono configuration), power 2x50wrms at 8 ohms. Accepts modules: Phono Stage MM/MC and Coaxial DAC or USB DAC. Inputs 5x Line (or 4x Line, 1x extra Phono), 1x Tape Loop (1x In, 1x Out), 1x USB (for extra dac board. Outputs: 2x pairs Pre Out, 1x pair Speakers. Made in Sweden.

Quick view

MoonRiver Audio Model-404 Reference

ΕΝΙΣΧΥΤΕΣ, Ολοκληρωμένοι ενισχυτές

4,950.00€

MoonRiver Audio Model-404 Reference

Quick view

ZYX ULTIMATE EX 4D

ΚΕΦΑΛΕΣ, Moving coil

4,950.00€

ZYX ULTIMATE EX 4D

Quick view

ETSURO-URUSHI COBALT BLUE

ΚΕΦΑΛΕΣ, Moving coil

4,950.00€

ETSURO-URUSHI COBALT BLUE

Quick view

PMC twenty5.23i

ΗΧΕΙΑ, ηχεία δαπέδου

4,950.00€

PMC twenty5.23i

Επιλογή

Quick view

MICHELL Gyro SE BLACK

ΠΙΚΑΠ

4,920.00€

MICHELL Gyro SE BLACK (χωρίς βραχίονα)

MICHELL GYRO SE BLACK ΕΝΑ GYRODEC ΜΕ ΜΙΚΡΟ ΑΠΟΤΥΠΩΜΑ

Το Gyro SE BLACK είναι παραλλαγή του Gyrodec που προσφέρει σχεδόν πανομοιότυπες επιδόσεις με το μεγαλύτερο αδερφάκι του στο οποίο όμως η πλήρους μεγέθους ακρυλική βάση έχει αντικατασταθεί από ένα άκαμπτο και αδρανές ακρυλικό spyder για τη στήριξη του πλαισίου. Το Gyro SE BLACK είναι το πικάπ με τις μεγαλύτερες πωλήσεις στην ιστορία της Michell που προσφέρει ήχο αναφοράς στην κατηγορία τιμής του χωρίς να καταλαμβάνει πολύ χώρο.

MICHELL Gyro SE BLACK

Quick view

MICHELL Gyro SE

ΠΙΚΑΠ

4,920.00€

MICHELL Gyro SE

MICHELL GYRO SE, ΕΝΑ GYRODEC ΜΕ ΜΙΚΡΟ ΑΠΟΤΥΠΩΜΑ

Το Gyro SE είναι παραλλαγή του Gyrodec που προσφέρει σχεδόν πανομοιότυπες επιδόσεις με το μεγαλύτερο αδερφάκι του στο οποίο όμως η πλήρους μεγέθους ακρυλική βάση έχει αντικατασταθεί από ένα άκαμπτο και αδρανές ακρυλικό spyder για τη στήριξη του πλαισίου. Το Gyro SE είναι το πικάπ με τις μεγαλύτερες πωλήσεις στην ιστορία της Michell που προσφέρει ήχο αναφοράς στην κατηγορία τιμής του χωρίς να καταλαμβάνει πολύ χώρο.

MICHELL Gyro SE

Xerxes 20 Plus Turntable The Xerxes 20 Plus was the result of ongoing research, development and refinement of the ideas behind the original Xerxes Turntable. The quality of engineering was visible through the compact clean lines and robust construction of the three-plinth, triple-layer isolation system. The Xerxes 20 Plus Turntable was best suited with Roksan tonearms, but was compatible any other high-quality tonearms. It offered a powerful and expansive sound displaying a fine mid-band, fast deep bass, very smooth and open treble. Musicians are firmly located within the soundstage, with tempo and musicality combining to create a compelling sense of live music being played. If your quest is to extract the most from your record collection, playing them on the Xerxes 20 Plus when fitted with an appropriate tonearm and cartridge was how best to achieve it.

Quick view

Xerxes 20 Plus Turntable

ΠΙΚΑΠ

4,915.00€

Xerxes 20 Plus Turntable

Audio Note ANK-LX Details The Audio Note ANK-LX is a compact "bookshelf" design, using two drive units per cabinet to cover a very wide frequency response, given its modest dimensions. Unlike many "bookshelf" designs, the AN-K is relatively efficient and offers the amplifier an easy "load," making it highly suitable for our range of superior quality, low-powered valve amplifiers. The majority of the high-end audio marketplace is occupied by ill-conceived low efficiency loudspeaker systems. These designs usually consist of several less-than-ideally matched drivers and a very complex crossover, crammed into a cabinet that exhibits the tonal and textural qualities of reinforced concrete. Their designers are blinded by the dogmatic quest for high sound pressure levels and flat response. But what of the other factors which are essential for emotionally involving music reproduction? What about coherence, full natural micro—as well as macro—dynamics, inner detail? What about LIFE? What about EMOTION? Sorry, they’re just not part of the “High Performance Audio” design brief. And music suffers for it. The design of the AN-K Loudspeaker, by contrast, follows an altogether different philosophy. It calls for a cabinet that complements the chosen drive units, rather than fighting against them. Instead of trying to kill the resonances, we tailor the cabinet to place them in frequency bands where they aid and enhance the operation of the drive units, culminating in a loudspeaker system that makes the most of the preceding amplifier’s output. The material choice for the cabinet is an area where a great deal of research and development has taken place. Over the years, we have tried many different materials and combinations, a time consuming endeavour culminating in the current design, which utilises the highest quality birch ply for the entire cabinet. Bracing and internal damping is kept to a minimum and strategically applied to help, not hinder, the drivers. The cabinet has been designed to be placed close to room boundaries, where the bass performance is augmented significantly by the additional reinforcement offered by the nearby walls. In this position, it will outperform any similarly sized speaker regardless of origin, thanks in part to the shallow cabinet / wide baffle shape which gives the drivers the best possible operating conditions, allowing them to perform as if they are mounted in a virtual wall. This provides the most undisturbed sound field with the widest and most even dispersion possible from a real world cabinet shape. The crossover is simple, essentially first order, hardwired and incorporates air-cored chokes and selected bipolar and polypropylene capacitors (either copper foil or silver foil, depending on model). The internal cabling consists of either 99.99% pure copper or 99.99% pure silver Audio Note (UK) wire, depending on the exact model. (See specifications) Consistent performance is a major issue in loudspeaker design and unfortunately all drive units vary slightly from each other, even if they look the same and have the same basic specification. Many loudspeaker manufacturer’s will tell you that they provide “computer matched” crossovers, and whilst this may be true in one sense (each crossover may have been matched to have the exact same capacitance, inductance and resistance) this essentially “passive” method does not adequately take into consideration the mechanical and acoustic variance present in the drive units themselves, where minute differences in acoustic behaviour will result in quite substantial differences in performance and sound. Therefore, to obtain the best possible combination of drivers and crossovers, we have developed a dynamic matching process. This ensures that each loudspeaker in a stereo pair matches a "master curve" and also its partner, to within 0.4dB. To the best of our knowledge, no other loudspeaker manufacturer achieves such close-matching and tests 100% of its production. Another much overlooked area of loudspeaker design is the material choice for the drivers. It has become very fashionable to use all manner of exotic materials (beryllium, diamond, carbon fibre, ceramics etc.) as cone materials in modern drivers, mainly because it gives the impression that the manufacturer in question is making great strides in their research into better sounding speakers. The sad fact is none of these materials work as intended, as they all have their own distinct sonic signature, so no matter how the crossover is designed, this sonic signature will be present when the speaker reproduces music. It may be less obvious and audible with some types of music, but ultimately the chosen material will always imprint some of its own signature on whatever sound is reproduced. In addition, it is vitally important that the sound and characteristics of an individual drive unit are complimentary to those of its chosen partner, so that when an instrument is reproduced by both drive units (which is almost always the case), the upper range does not sound detached from the lower range and visa versa. This is an aspect of performance that cannot be measured by even the most sophisticated test equipment; it can ONLY be judged by listening. We at Audio Note are keenly aware of this and have deliberately chosen drive units whose sonic signatures are as closely matched as possible. This has led us to favour good, old fashioned paper for the woofer cone and impregnated silk for the dome tweeter. These materials, when matched correctly, marry the low and high frequencies seamlessly, providing the best level of performance possible in the real world of acoustics.

Quick view

Audio Note ANK-LX

ΗΧΕΙΑ, ηχεία βάσης και βιβλιοθήκης

4,910.00€

Audio Note ANK-LX

Quick view