Show sidebar
Show 24 48 64
Filters
Filter by brand
Q-KORE GROUND WIRE One of the most incessant problems that can plague a hifi system is that annoying hum. Noise is triggered when two circuits carrying different amounts of current overlap each other, or when a loop is created by stray magnetic fields generated by transformers in connected equipment. This problem is only magnified when your system is spread between several connected wall outlets throughout your listening room, as many are. The only solution to this problem: separate the circuits so that no overlaps occur by providing a designated ground. Insulation: Fluorinated Ethylene Propylene (FEP) Construction: Micro Mono-Filament Design Conductors: 1x16 AWG Material: Silver plated 99.9999% solid core OFC Termination: Banana, Spade, RCA, Male-XLR, Female-XLR, BNC, RJ45, USB A, and USB B
Quick view
Add to compare
Add to wishlist

Nordost Q-KORE GROUND WIRE

,
€269.00

Nordost Q-KORE GROUND WIRE

Q-KORE GROUND WIREOne of the most incessant problems that can plague a hifi system is that annoying hum. Noise is triggered when two circuits carrying different amounts of current overlap each other, or when a loop is created by stray magnetic fields generated by transformers in connected equipment. This problem is only magnified when your system is spread between several connected wall outlets throughout your listening room, as many are. The only solution to this problem: separate the circuits so that no overlaps occur by providing a designated ground. Insulation: Fluorinated Ethylene Propylene (FEP) Construction: Micro Mono-Filament Design Conductors: 1x16 AWG Material: Silver plated 99.9999% solid core OFC Termination: Banana, Spade, RCA, Male-XLR, Female-XLR, BNC, RJ45, USB A, and USB B

Nordost Q-KORE GROUND WIRE

Προσθήκη στο καλάθι
Nordost QLINE GROUND WIRE 2m QUANTUM GROUND WIRE One of the most incessant problems that can plague a hifi system is that annoying hum. Noise is triggered when two circuits carrying different amounts of current overlap each other, or when a loop is created by stray magnetic fields generated by transformers in connected equipment. This problem is only magnified when your system is spread between several connected wall outlets throughout your listening room, as many are. The only solution to this problem: separate the circuits so that no overlaps occur by providing a designated ground. While the easiest way to provide a designated ground for your sound system is achieved by using our QKORE grounding system, homeowners with the ability to install an outdoor ground rod will find Nordost’s QLINE Ground Wire an indispensable tool. Utilizing Nordost’s patented Micro Mono-Filament technology, combined with extruded FEP insulation, the QLINE is the missing link needed to complete the circuit —connecting the QBASE ground post to a designated, external ground rod or grounding box, through its uniquely low resistance path. Proper grounding will transform your system, offering enhancements in 3D imaging as well as lowering the noise floor. Nordost’s QLINE is available in multiple lengths with airtight, waterproof terminations in order to accommodate your specific needs. It is important to recognize, that while installing a designated ground for your hifi system is the most efficient and direct approach to eliminate ground loops and AC hum, there are some states and countries that prohibit the use of a second ground. Please consult a local electrician to ensure that the improvements you make on your sound system remain to code.
Quick view
Add to compare
Add to wishlist

Nordost QLINE GROUND WIRE

,
€399.00

Nordost QLINE GROUND WIRE

Nordost QLINE GROUND WIRE2m QUANTUM GROUND WIRE One of the most incessant problems that can plague a hifi system is that annoying hum. Noise is triggered when two circuits carrying different amounts of current overlap each other, or when a loop is created by stray magnetic fields generated by transformers in connected equipment. This problem is only magnified when your system is spread between several connected wall outlets throughout your listening room, as many are. The only solution to this problem: separate the circuits so that no overlaps occur by providing a designated ground. While the easiest way to provide a designated ground for your sound system is achieved by using our QKORE grounding system, homeowners with the ability to install an outdoor ground rod will find Nordost’s QLINE Ground Wire an indispensable tool. Utilizing Nordost’s patented Micro Mono-Filament technology, combined with extruded FEP insulation, the QLINE is the missing link needed to complete the circuit —connecting the QBASE ground post to a designated, external ground rod or grounding box, through its uniquely low resistance path. Proper grounding will transform your system, offering enhancements in 3D imaging as well as lowering the noise floor. Nordost’s QLINE is available in multiple lengths with airtight, waterproof terminations in order to accommodate your specific needs. It is important to recognize, that while installing a designated ground for your hifi system is the most efficient and direct approach to eliminate ground loops and AC hum, there are some states and countries that prohibit the use of a second ground. Please consult a local electrician to ensure that the improvements you make on your sound system remain to code.

Nordost QLINE GROUND WIRE

Προσθήκη στο καλάθι
Nordost QB4 MKII The essence of the QBASE-Mark II concept is a straight-line AC distribution path, combined with star-earthed topology for connection to a clean ground. By eliminating any form of in-line filtering or active circuitry we maintain the lowest possible AC supply impedance, while a tiny lift in the earth impedance of all but one of the output sockets routes the signal grounds directly to the center of the star and the clean earth terminal. Clearly identified on the casework, this Primary Earth socket is at the center of your system’s performance, literally and metaphorically. It defines both the order in which you connect your components and also, their listening priority in your musical enjoyment, allowing you to further optimize the performance of your primary sources.
Quick view
Add to compare
Add to wishlist

Nordost QB4 MKII

€1,089.00

Nordost QB4 MKII

Nordost QB4 MKIIThe essence of the QBASE-Mark II concept is a straight-line AC distribution path, combined with star-earthed topology for connection to a clean ground. By eliminating any form of in-line filtering or active circuitry we maintain the lowest possible AC supply impedance, while a tiny lift in the earth impedance of all but one of the output sockets routes the signal grounds directly to the center of the star and the clean earth terminal. Clearly identified on the casework, this Primary Earth socket is at the center of your system’s performance, literally and metaphorically. It defines both the order in which you connect your components and also, their listening priority in your musical enjoyment, allowing you to further optimize the performance of your primary sources.

Nordost QB4 MKII

Προσθήκη στο καλάθι
Quick view
Add to compare
Add to wishlist

Nordost QRT Qv2

€405.00

Nordost QRT Qv2

Nordost QRT Qv2

Προσθήκη στο καλάθι
Thanks to the experience acquired in the fabrication of successful products such as the Blue Heaven HDMI and USB 2.0 cables, Nordost can now further refine digital leads through its most current, proprietary technology. The Heimdall 2 USB 2.0 is constructed from 4 x 20 AWG stranded, silver-plated 99.99999% OFC conductors, arranged in a precise, twisted double helix in order to ensure character impedance, reduce noise and minimize cross-talk contamination. In order to increase dielectric, the conductors are suspended in Nordost’s proprietary FEP Dual Mono-Filament, which is newly optimized to increase flexibility and mechanical damping. Add a dual layer silver foil jacket and silver braided shield and the Heimdall 2’s extreme data transmission speeds surpass the USB 2.0 standards. To further up the ante, the new Heimdall 2 USB 2.0 is now implementing mechanically tuned lengths. This technique, used in Nordost’s Odin, Norse 2 and Valhalla 2 ranges, reduces internal microphonics and high-frequency impedance resonance, which ultimately allows you to enjoy the dynamics, coherence and balance of live music played in the comfort of your own listening room.
Quick view
Add to compare
Add to wishlist

Nordost Heimdall 2 USB

,
€489.00

Nordost Heimdall 2 USB

Thanks to the experience acquired in the fabrication of successful products such as the Blue Heaven HDMI and USB 2.0 cables, Nordost can now further refine digital leads through its most current, proprietary technology. The Heimdall 2 USB 2.0 is constructed from 4 x 20 AWG stranded, silver-plated 99.99999% OFC conductors, arranged in a precise, twisted double helix in order to ensure character impedance, reduce noise and minimize cross-talk contamination. In order to increase dielectric, the conductors are suspended in Nordost’s proprietary FEP Dual Mono-Filament, which is newly optimized to increase flexibility and mechanical damping. Add a dual layer silver foil jacket and silver braided shield and the Heimdall 2’s extreme data transmission speeds surpass the USB 2.0 standards.To further up the ante, the new Heimdall 2 USB 2.0 is now implementing mechanically tuned lengths. This technique, used in Nordost’s Odin, Norse 2 and Valhalla 2 ranges, reduces internal microphonics and high-frequency impedance resonance, which ultimately allows you to enjoy the dynamics, coherence and balance of live music played in the comfort of your own listening room.

Nordost Heimdall 2 USB

Προσθήκη στο καλάθι
Nordost QRT 1 QK1 AC ENHANCER The QKOIL QK1 AC Enhancer uses a load resonating coil (LRC) to generate a passive electronic field that has a beneficial sonic effect on the AC current. Like the QV2, The QKOIL provides a vital solution to the issues of AC quality and audio/video performance, but unlike the QVIBE, the new QK1 achieves this by using an LRC furnished with Nordost’s patented Micro Mono-Filament technology. Using our MMF technology in a loading application prevents time delay and distortion of the transmitted signal, making the AC current that much closer to the desired “distortionless condition”. The Sensory results: an improvement in the overtones and pacing of the music as well as a greater sharpness, depth and focus of visual qualities. The QKOIL is the entry level product in the QRT range, a family of modular, non-intrusive innovations that deliver measurable sonic enhancements and provide power in the purist way. Like other QRT products, the benefits are cumulative and QK1s are even more impressive when applied collectively. It can be used as a “stand alone” product or to complement a full QRT system with QBASE-Mark II, QX4, QX2 and especially QV2 units.. The QK1 is housed in a mechanically tuned carbon-fiber body and equipped with either a US (NEMA) or EU (Schuko) connector. It is compatible with voltages from 110V to 240V, and can be used with an AUS or UK adaptor if required. Plug the QKOIL into any spare socket on your system’s AC Line and experience first-hand the surprising yet indisputable effect it will have on you’re A/V components. • Generates a passive electronic field • Allows for greater musicality and improves tonal balance • Increases clarity of imaging, including sharpness, depth and focus • Lowers the noise floor • Load resonating coil using patented Micro Mono-Filament technology • Mechanically tuned carbon-fiber body
Quick view
Add to compare
Add to wishlist

Nordost QRT 1

€285.00

Nordost QRT 1

Nordost QRT 1QK1 AC ENHANCER The QKOIL QK1 AC Enhancer uses a load resonating coil (LRC) to generate a passive electronic field that has a beneficial sonic effect on the AC current. Like the QV2, The QKOIL provides a vital solution to the issues of AC quality and audio/video performance, but unlike the QVIBE, the new QK1 achieves this by using an LRC furnished with Nordost’s patented Micro Mono-Filament technology. Using our MMF technology in a loading application prevents time delay and distortion of the transmitted signal, making the AC current that much closer to the desired “distortionless condition”. The Sensory results: an improvement in the overtones and pacing of the music as well as a greater sharpness, depth and focus of visual qualities. The QKOIL is the entry level product in the QRT range, a family of modular, non-intrusive innovations that deliver measurable sonic enhancements and provide power in the purist way. Like other QRT products, the benefits are cumulative and QK1s are even more impressive when applied collectively. It can be used as a “stand alone” product or to complement a full QRT system with QBASE-Mark II, QX4, QX2 and especially QV2 units.. The QK1 is housed in a mechanically tuned carbon-fiber body and equipped with either a US (NEMA) or EU (Schuko) connector. It is compatible with voltages from 110V to 240V, and can be used with an AUS or UK adaptor if required. Plug the QKOIL into any spare socket on your system’s AC Line and experience first-hand the surprising yet indisputable effect it will have on you’re A/V components. • Generates a passive electronic field • Allows for greater musicality and improves tonal balance • Increases clarity of imaging, including sharpness, depth and focus • Lowers the noise floor • Load resonating coil using patented Micro Mono-Filament technology • Mechanically tuned carbon-fiber body

Nordost QRT 1

Προσθήκη στο καλάθι
Quick view
Add to compare
Add to wishlist

Nordost WonderSolder ασημοκόλληση

€189.00

Nordost WonderSolder ασημοκόλληση

Nordost WonderSolder ασημοκόλληση

Προσθήκη στο καλάθι
Nordost VALHALLA2 VALHALLA2 ANALOG INTERCONNECT The Valhalla 2 Interconnect consists of 10 conductors made from solid, optimized diameter 99.999999% oxygen free copper, each plated with 85 microns of silver. Its surface is highly polished and treated before a precision Dual Mono-Filament wrap is applied. A precision FEP tube is then extruded over each conductor. The ten FEP tubes are then bonded with a proprietary technique to create a tubular interconnect cable, enclosed in two layers of silver shielding. The V2 interconnect is offered with either RCA or XLR HOLO:PLUG® connectors. V2 is extremely fast, at over 87% the speed of light. It transmits wide bandwidth signals with incredible speed and minimum phase shift. The V2 cable is state of the art, bettered only by the mighty Odin. It delivers incredible transient response and dynamic resolution so that no musical detail is lost. Each Valhalla 2 interconnect cable is hand built in the USA with HOLO:PLUG® RCA phono plugs or HOLO:PLUG® XLR connectors.
Quick view
Add to compare
Add to wishlist

Nordost VALHALLA2

,
€8,549.00 – €10,939.00

Nordost VALHALLA2

Nordost VALHALLA2VALHALLA2 ANALOG INTERCONNECT The Valhalla 2 Interconnect consists of 10 conductors made from solid, optimized diameter 99.999999% oxygen free copper, each plated with 85 microns of silver. Its surface is highly polished and treated before a precision Dual Mono-Filament wrap is applied. A precision FEP tube is then extruded over each conductor. The ten FEP tubes are then bonded with a proprietary technique to create a tubular interconnect cable, enclosed in two layers of silver shielding. The V2 interconnect is offered with either RCA or XLR HOLO:PLUG® connectors. V2 is extremely fast, at over 87% the speed of light. It transmits wide bandwidth signals with incredible speed and minimum phase shift. The V2 cable is state of the art, bettered only by the mighty Odin. It delivers incredible transient response and dynamic resolution so that no musical detail is lost. Each Valhalla 2 interconnect cable is hand built in the USA with HOLO:PLUG® RCA phono plugs or HOLO:PLUG® XLR connectors.

Nordost VALHALLA2

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Nordost Tyr2 TYR 2 ANALOG INTERCONNECT Norse 2 Series interconnects deliver a level of performance not previously possible at their price points. Nordost’s proprietary Dual Mono-Filament construction, first introduced on the legendary Valhalla reference cables, creates a virtual air dielectric complete with an elegantly engineered suspension system. When combined with silver-plated OFC solid core conductors and FEP insulation throughout, the result is the ideal electrically and mechanically controlled construction for ultra-fast, low-loss signal transfer. Optimized conductor dimensions significantly extend the musical performance of the new Norse 2 Series, finally allowing your equipment to deliver its full performance potential, while the consistency of design and materials across the entire Norse 2 Series means that you can easily prioritize a system-wide solution without compromising the coherence of your cables.
Quick view
Add to compare
Add to wishlist

Nordost Tyr2

,
€2,669.00 – €3,559.00

Nordost Tyr2

Nordost Tyr2 TYR 2 ANALOG INTERCONNECT Norse 2 Series interconnects deliver a level of performance not previously possible at their price points. Nordost’s proprietary Dual Mono-Filament construction, first introduced on the legendary Valhalla reference cables, creates a virtual air dielectric complete with an elegantly engineered suspension system. When combined with silver-plated OFC solid core conductors and FEP insulation throughout, the result is the ideal electrically and mechanically controlled construction for ultra-fast, low-loss signal transfer. Optimized conductor dimensions significantly extend the musical performance of the new Norse 2 Series, finally allowing your equipment to deliver its full performance potential, while the consistency of design and materials across the entire Norse 2 Series means that you can easily prioritize a system-wide solution without compromising the coherence of your cables.

Nordost Tyr2

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Nordost 14-2 speaker cable Nordost’s 14-2 Speaker Cable uses two 14 AWG, 99.9999% OFC stranded conductors, which have been extruded with premium PVC. This heavy gauged speaker cable is specifically constructed for in-wall installation. As such, Nordost’s 14-2 Speaker Cable is RoHS Compliant and has a UL rating of CL3, which is rated for up to 300 volts. The 14-2 Speaker Cable’s durability and flexibility make it the perfect solution for snaking your speaker cables through walls, giving your listening room a sleek look without compromising the sound and integrity of your sound system.
Quick view
Add to compare
Add to wishlist

Nordost 14-2 speaker cable

,
€16.00 – €48.00

Nordost 14-2 speaker cable

Nordost 14-2 speaker cableNordost’s 14-2 Speaker Cable uses two 14 AWG, 99.9999% OFC stranded conductors, which have been extruded with premium PVC. This heavy gauged speaker cable is specifically constructed for in-wall installation. As such, Nordost’s 14-2 Speaker Cable is RoHS Compliant and has a UL rating of CL3, which is rated for up to 300 volts. The 14-2 Speaker Cable’s durability and flexibility make it the perfect solution for snaking your speaker cables through walls, giving your listening room a sleek look without compromising the sound and integrity of your sound system.

Nordost 14-2 speaker cable

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Nordost Superflatline speaker cable The SuperFlatline Speaker Cable is a true Nordost classic. This highly sought after product offers detail, clarity, and purity throughout the whole frequency spectrum, from subsonic lows to ultrasonic highs. The SuperFlatline Speaker Cable consists of sixteen 23 AWG, solid core, flat, rectangular, copper conductors. These conductors undergo an innovative precision FEP extrusion process, which lowers the capacitance and increases the bandwidth of the cable dramatically, enhancing accuracy and speed of signal transfer. This high quality, versatile cable can be used in any system. When used in a shotgun configuration, the SuperFlatline is capable of carrying high currents (up to 12.5 amps at 300 volts), while its 16 conductors can easily facilitate bi-wiring or bi-amping. In addition to the impressive quality of performance this cable can achieve, the flat geometry of SuperFlatline makes it possible to run lengths under carpets for easy and discreet installation.
Quick view
Add to compare
Add to wishlist

Nordost Superflatline speaker cable

,
€419.00 – €539.00

Nordost Superflatline speaker cable

Nordost Superflatline speaker cableThe SuperFlatline Speaker Cable is a true Nordost classic. This highly sought after product offers detail, clarity, and purity throughout the whole frequency spectrum, from subsonic lows to ultrasonic highs. The SuperFlatline Speaker Cable consists of sixteen 23 AWG, solid core, flat, rectangular, copper conductors. These conductors undergo an innovative precision FEP extrusion process, which lowers the capacitance and increases the bandwidth of the cable dramatically, enhancing accuracy and speed of signal transfer. This high quality, versatile cable can be used in any system. When used in a shotgun configuration, the SuperFlatline is capable of carrying high currents (up to 12.5 amps at 300 volts), while its 16 conductors can easily facilitate bi-wiring or bi-amping. In addition to the impressive quality of performance this cable can achieve, the flat geometry of SuperFlatline makes it possible to run lengths under carpets for easy and discreet installation.

Nordost Superflatline speaker cable

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Nordost Tyr 2 USB The Tyr 2 USB 2.0 Cable is guaranteed to take your computer audio system to the next level. It implements a solid core design, which is essential when working with a cable of this caliber. This essential upgrade completely eliminates the negative effects of strand interaction and skin effect. Each of the four 20 AWG, solid core conductors is then wrapped in Nordost’s proprietary Dual Mono-Filament technology before being enclosed in extruded FEP, which lowers the capacitance of the cable, both increasing signal speed and bandwidth. The Tyr 2 USB 2.0 Cable arranges its conductors in a precise, twisted, double helix geometry in order to ensure characteristic impedance, minimize cross-talk, and reduce noise. To even further reduce noise, and protect the USB signal path from any external interference, Nordost employs a dual-layer, silver foil jacket and silver braided shield. Finally, before being terminated with gold-plated, fully shielded connectors, the Tyr 2 USB is cut to mechanically tuned lengths, which reduce internal microphonics and high-frequency impedance resonance. As with all Nordost products, the Tyr 2 USB 2.0 Cable is handmade in the USA, ensuring a high level of production quality and the extreme precision necessary to manufacture USB cables capable of overcoming jitter and timing errors. The Tyr 2 USB 2.0 Cable is the solution you need in order to achieve the superb sound staging, wide dynamic range, and precise timing you have been looking for in computer audio.
Quick view
Add to compare
Add to wishlist

Nordost Tyr 2 USB

,
€1,269.00 – €2,339.00

Nordost Tyr 2 USB

Nordost Tyr 2 USBThe Tyr 2 USB 2.0 Cable is guaranteed to take your computer audio system to the next level. It implements a solid core design, which is essential when working with a cable of this caliber. This essential upgrade completely eliminates the negative effects of strand interaction and skin effect. Each of the four 20 AWG, solid core conductors is then wrapped in Nordost’s proprietary Dual Mono-Filament technology before being enclosed in extruded FEP, which lowers the capacitance of the cable, both increasing signal speed and bandwidth. The Tyr 2 USB 2.0 Cable arranges its conductors in a precise, twisted, double helix geometry in order to ensure characteristic impedance, minimize cross-talk, and reduce noise. To even further reduce noise, and protect the USB signal path from any external interference, Nordost employs a dual-layer, silver foil jacket and silver braided shield. Finally, before being terminated with gold-plated, fully shielded connectors, the Tyr 2 USB is cut to mechanically tuned lengths, which reduce internal microphonics and high-frequency impedance resonance. As with all Nordost products, the Tyr 2 USB 2.0 Cable is handmade in the USA, ensuring a high level of production quality and the extreme precision necessary to manufacture USB cables capable of overcoming jitter and timing errors. The Tyr 2 USB 2.0 Cable is the solution you need in order to achieve the superb sound staging, wide dynamic range, and precise timing you have been looking for in computer audio.

Nordost Tyr 2 USB

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Nordost Blue Heaven USB The Blue Heaven USB 2.0 Data Cable sets a new technological and performance standard when it comes to computer audio. Nordost's proven, proprietary FEP and Micro Mono-Filament construction delivers low dielectric loss and minimizes cable induced timing errors in critical digital signals. This cable is purpose built from four OFC conductors, optimally dimensioned for digital signal transfer. These are precision wound, double shielded and terminated, all in the USA to ensure geometrical and sonic consistency. Full metal jacket, in-molded connectors extend both precision and shielding, while gold-plated contacts maintain optimum signal transfer. The result is an ultra high-speed, low-loss cable, specifically designed to deliver the best possible performance from computer audio sources. Superior technology, superior materials and superior build quality all add up to one thing–superior sound.
Quick view
Add to compare
Add to wishlist

Nordost Blue Heaven USB

,
€249.00 – €649.00

Nordost Blue Heaven USB

Nordost Blue Heaven USBThe Blue Heaven USB 2.0 Data Cable sets a new technological and performance standard when it comes to computer audio. Nordost's proven, proprietary FEP and Micro Mono-Filament construction delivers low dielectric loss and minimizes cable induced timing errors in critical digital signals. This cable is purpose built from four OFC conductors, optimally dimensioned for digital signal transfer. These are precision wound, double shielded and terminated, all in the USA to ensure geometrical and sonic consistency. Full metal jacket, in-molded connectors extend both precision and shielding, while gold-plated contacts maintain optimum signal transfer. The result is an ultra high-speed, low-loss cable, specifically designed to deliver the best possible performance from computer audio sources. Superior technology, superior materials and superior build quality all add up to one thing–superior sound.

Nordost Blue Heaven USB

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Nordost HEIMDALL 2 tonearm cable Phono cartridges, with their incredibly low signal levels and clearly defined electrical requirements demand dedicated cable designs. In order to deal with delicate signals, Nordost’s proprietary Dual Mono-Filament construction creates a virtual air dielectric around dimensionally optimized, silver-plated OFC solid core conductors. When combined with FEP insulation throughout, the result is the ideal electrically and mechanically controlled construction for ultra-fast, low-loss transfer of these extremely delicate signals. With effective shielding, dual grounding and a full range of termination options in both single-ended and balanced configurations, the Heimdall 2 Tonearm Cable allows you to specify the topology required to liberate the musical performance locked in the grooves on your LP collection. This dedicated tonearm lead will finally allow your record player to deliver its full performance potential. Its position, right at the start of the signal chain, and the fragile nature of the signals it carries make it doubly critical, and deliver a double performance benefit when you get it right. The consistency of design and materials across the entire Norse 2 Series means that you can take full advantage of a system-wide solution without compromising the coherence of your cables, all the way from the base of your tonearm.
Quick view
Add to compare
Add to wishlist

Nordost HEIMDALL 2 tonearm cable

,
€619.00 – €719.00

Nordost HEIMDALL 2 tonearm cable

Nordost HEIMDALL 2 tonearm cablePhono cartridges, with their incredibly low signal levels and clearly defined electrical requirements demand dedicated cable designs. In order to deal with delicate signals, Nordost’s proprietary Dual Mono-Filament construction creates a virtual air dielectric around dimensionally optimized, silver-plated OFC solid core conductors. When combined with FEP insulation throughout, the result is the ideal electrically and mechanically controlled construction for ultra-fast, low-loss transfer of these extremely delicate signals. With effective shielding, dual grounding and a full range of termination options in both single-ended and balanced configurations, the Heimdall 2 Tonearm Cable allows you to specify the topology required to liberate the musical performance locked in the grooves on your LP collection. This dedicated tonearm lead will finally allow your record player to deliver its full performance potential. Its position, right at the start of the signal chain, and the fragile nature of the signals it carries make it doubly critical, and deliver a double performance benefit when you get it right. The consistency of design and materials across the entire Norse 2 Series means that you can take full advantage of a system-wide solution without compromising the coherence of your cables, all the way from the base of your tonearm.

Nordost HEIMDALL 2 tonearm cable

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Nordost Blue Heaven tonearm cable The tiny signals generated by pick-up cartridges, especially modern moving-coils, can be between 500 and 5000 times smaller than the average output of a CD player. Such fragile signals demand purpose built, low-capacitance cables if the finest details and textures are to escape smearing and loss. Low capacitance is a central aim of Nordost's high-speed minimalist construction, but a tonearm lead demands more. The Blue Heaven Tonearm Cable delivers exactly the low-loss electrical characteristics required, combined with effective shielding, dual grounding and a full range of termination options in both single-ended and balanced configurations, allowing you to specify the exact topology required to liberate the musical performance locked in the grooves on your LP collection. Nordost
Quick view
Add to compare
Add to wishlist

Nordost Blue Heaven tonearm cable

,
€369.00

Nordost Blue Heaven tonearm cable

Nordost Blue Heaven tonearm cableThe tiny signals generated by pick-up cartridges, especially modern moving-coils, can be between 500 and 5000 times smaller than the average output of a CD player. Such fragile signals demand purpose built, low-capacitance cables if the finest details and textures are to escape smearing and loss. Low capacitance is a central aim of Nordost's high-speed minimalist construction, but a tonearm lead demands more. The Blue Heaven Tonearm Cable delivers exactly the low-loss electrical characteristics required, combined with effective shielding, dual grounding and a full range of termination options in both single-ended and balanced configurations, allowing you to specify the exact topology required to liberate the musical performance locked in the grooves on your LP collection. Nordost

Nordost Blue Heaven tonearm cable

Προσθήκη στο καλάθι
Nordost Bass Line interconnect The Nordost CinemaFlex BassLine Subwoofer Lead is a flat, shielded interconnect cable specifically developed for use in home theater systems. The Nordost CinemaFlex BassLine Subwoofer Lead consist of six silver-plated, solid 24 AWG, 99.9999% OFC conductors. Each conductor is insulated with extruded FEP. The conductors are shielded with an aluminized Mylar shield and then sheathed in a layer of extruded FEP. Due to its flat, shielded design and low signal loss, it is ideal for running line-level signals in multi-channel applications. This cable is perfectly suited for running under carpets and inside baseboards or skirting boards because of its unique flat construction. The cable is 1/4 inches or 6.55mm wide and is less than 1/16 of an inch or 1.6mm thick. Nordost CinemaFlex BassLine Subwoofer Lead is designed to complement our range of video cables. Designed for ease of installation it is an extremely durable cable it will solve a multitude of installation problems. Its high-grade shield construction means it can be run in tight quarters close to power lines.
Quick view
Add to compare
Add to wishlist

Nordost Bass Line interconnect

,
€170.00 – €270.00

Nordost Bass Line interconnect

Nordost Bass Line interconnectThe Nordost CinemaFlex BassLine Subwoofer Lead is a flat, shielded interconnect cable specifically developed for use in home theater systems. The Nordost CinemaFlex BassLine Subwoofer Lead consist of six silver-plated, solid 24 AWG, 99.9999% OFC conductors. Each conductor is insulated with extruded FEP. The conductors are shielded with an aluminized Mylar shield and then sheathed in a layer of extruded FEP. Due to its flat, shielded design and low signal loss, it is ideal for running line-level signals in multi-channel applications. This cable is perfectly suited for running under carpets and inside baseboards or skirting boards because of its unique flat construction. The cable is 1/4 inches or 6.55mm wide and is less than 1/16 of an inch or 1.6mm thick. Nordost CinemaFlex BassLine Subwoofer Lead is designed to complement our range of video cables. Designed for ease of installation it is an extremely durable cable it will solve a multitude of installation problems. Its high-grade shield construction means it can be run in tight quarters close to power lines.

Nordost Bass Line interconnect

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Nordost Heimdall 1 interconnect Heimdall is a serious threat to high-priced interconnects. Using 4 Solid OFC conductors with Nordost’s proprietary Silver Surface, Heimdall delivers a high level of musicality from the very bottom to the extreme top of the frequency range. The Mono-Filament conductors are wrapped with a Helix wound thread and then placed in Nordost’s proprietary insulator to ensure a practically perfect “air-dielectric.” The cables are then terminated with the world’s best WBT NEXTGEN™ gold-plated, copper connectors. This combination of four Mono-Filament conductors, combined with the WBT ends will give your system tremendous imaging and musical insight into the performance, while delivering Nordost’s tremendous speed and dynamic presentation. This is our best selling Nordost cable, put one in your system and you’ll hear why!
Quick view
Add to compare
Add to wishlist

Nordost Heimdall 1 interconnect

,
€517.50 – €622.50

Nordost Heimdall 1 interconnect

Nordost Heimdall 1 interconnectHeimdall is a serious threat to high-priced interconnects. Using 4 Solid OFC conductors with Nordost’s proprietary Silver Surface, Heimdall delivers a high level of musicality from the very bottom to the extreme top of the frequency range. The Mono-Filament conductors are wrapped with a Helix wound thread and then placed in Nordost’s proprietary insulator to ensure a practically perfect “air-dielectric.” The cables are then terminated with the world’s best WBT NEXTGEN™ gold-plated, copper connectors. This combination of four Mono-Filament conductors, combined with the WBT ends will give your system tremendous imaging and musical insight into the performance, while delivering Nordost’s tremendous speed and dynamic presentation. This is our best selling Nordost cable, put one in your system and you’ll hear why!

Nordost Heimdall 1 interconnect

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Nordost VALHALLA 2 Tonearm Cable + In order to maximize the performance of an analog system, every aspect of your tonearm cable, including the conductor layout, quality of connectors, versatility in termination, and grounding capabilities, must be entirely optimized for its application. The Valhalla 2 Tonearm Cable + is the only cable on the market to excel at every one of these important design aspects, exceeding the performance requirements that high-quality analog replay requires.
Quick view
Add to compare
Add to wishlist

Nordost VALHALLA 2 Tonearm Cable +

,
€4,199.00 – €4,699.00

Nordost VALHALLA 2 Tonearm Cable +

Nordost VALHALLA 2 Tonearm Cable +In order to maximize the performance of an analog system, every aspect of your tonearm cable, including the conductor layout, quality of connectors, versatility in termination, and grounding capabilities, must be entirely optimized for its application. The Valhalla 2 Tonearm Cable + is the only cable on the market to excel at every one of these important design aspects, exceeding the performance requirements that high-quality analog replay requires.

Nordost VALHALLA 2 Tonearm Cable +

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Nordost Frey 2 interconnect Norse 2 Series interconnects deliver a level of performance not previously possible at their price points. Nordost’s proprietary Dual Mono-Filament construction, first introduced on the legendary Valhalla reference cables, creates a virtual air dielectric complete with an elegantly engineered suspension system. When combined with silver-plated OFC solid core conductors and FEP insulation throughout, the result is the ideal electrically and mechanically controlled construction for ultra-fast, low-loss signal transfer.
Quick view
Add to compare
Add to wishlist

Nordost Frey 2 interconnect

,
€1,119.00 – €2,029.00

Nordost Frey 2 interconnect

Nordost Frey 2 interconnectNorse 2 Series interconnects deliver a level of performance not previously possible at their price points. Nordost’s proprietary Dual Mono-Filament construction, first introduced on the legendary Valhalla reference cables, creates a virtual air dielectric complete with an elegantly engineered suspension system. When combined with silver-plated OFC solid core conductors and FEP insulation throughout, the result is the ideal electrically and mechanically controlled construction for ultra-fast, low-loss signal transfer.

Nordost Frey 2 interconnect

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Nordost Spellbinder interconnect Spellbinder is an affordable, high-performance analog interconnect designed for use in any audio system. It uses 2 solid-core, silver-plated, OFC conductors with FEP insulation. This cable has a double layer of shielding, to reject RFI and electrical interference. It is handcrafted and finished with gold-plated RCA connectors. It offers excellent sound quality and detailed performance.
Quick view
Add to compare
Add to wishlist

Nordost Spellbinder interconnect

,
€109.00

Nordost Spellbinder interconnect

Nordost Spellbinder interconnectSpellbinder is an affordable, high-performance analog interconnect designed for use in any audio system. It uses 2 solid-core, silver-plated, OFC conductors with FEP insulation. This cable has a double layer of shielding, to reject RFI and electrical interference. It is handcrafted and finished with gold-plated RCA connectors. It offers excellent sound quality and detailed performance.

Nordost Spellbinder interconnect

Προσθήκη στο καλάθι
Nordost Red Dawn interconnect The Red Dawn Interconnect represents the performance pinnacle of the Leif Series. This cable yields the best performance possible in an interconnect without using Micro Mono-Filament/TSC cable design. But despite its relatively conventional appearance there’s more to this cable than meets the eye. The Red Dawn Analog Interconnect uses a fully-shielded design that can be terminated for balanced or single-ended connection. It employs six, heavy-gauge 24 AWG, silver-plated 99.9999% OFC solid core conductors, precision wound in a minimum cross-section configuration that eliminates unnecessary fillers or padding elements.
Quick view
Add to compare
Add to wishlist

Nordost Red Dawn interconnect

,
€479.00 – €759.00

Nordost Red Dawn interconnect

Nordost Red Dawn interconnectThe Red Dawn Interconnect represents the performance pinnacle of the Leif Series. This cable yields the best performance possible in an interconnect without using Micro Mono-Filament/TSC cable design. But despite its relatively conventional appearance there’s more to this cable than meets the eye. The Red Dawn Analog Interconnect uses a fully-shielded design that can be terminated for balanced or single-ended connection. It employs six, heavy-gauge 24 AWG, silver-plated 99.9999% OFC solid core conductors, precision wound in a minimum cross-section configuration that eliminates unnecessary fillers or padding elements.

Nordost Red Dawn interconnect

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Nordost Blue Heaven interconnect The Blue Heaven LS Analog Interconnect is a fully-shielded design that can be terminated for balanced or single-ended connection. It employs four, heavy-gauge 24 AWG, silver-plated 99.9999% OFC solid core conductors, precision wound in a minimum cross-section configuration that eliminates unnecessary fillers or padding elements. The insulation is high-grade FEP, selected for its superior dielectric performance, while the elegant minimalism extends to the carefully selected low-mass connectors and differential grounding.
Quick view
Add to compare
Add to wishlist

Nordost Blue Heaven interconnect

,
€355.00 – €519.00

Nordost Blue Heaven interconnect

Nordost Blue Heaven interconnectThe Blue Heaven LS Analog Interconnect is a fully-shielded design that can be terminated for balanced or single-ended connection. It employs four, heavy-gauge 24 AWG, silver-plated 99.9999% OFC solid core conductors, precision wound in a minimum cross-section configuration that eliminates unnecessary fillers or padding elements. The insulation is high-grade FEP, selected for its superior dielectric performance, while the elegant minimalism extends to the carefully selected low-mass connectors and differential grounding.

Nordost Blue Heaven interconnect

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
Digital interconnect cables require extremely accurate impedance characteristics, close tolerances and consistent geometry–especially when it comes to high-performance HDMI cables. To stand any chance of meeting HDMI’s exacting specification and transfer standards demands exceptional consistency from both the cable and the termination. The only way to guarantee that is to bring manufacturing and quality control in-house. The Blue Heaven HDMI Cable is entirely manufactured and hand-terminated at the Nordost factory in the USA, using our proprietary Micro Mono-Filament construction to deliver superior electrical and mechanical characteristics. It is the only way we can guarantee a cable that will be absolutely consistent in performance and deliver the movie and musical performances that your system is really capable of. Blue Heaven HDMI is one cable you really can rely on to deliver on time, every time.
Quick view
Add to compare
Add to wishlist

Nordost Blue Heaven HDMI

,
€309.00 – €489.00

Nordost Blue Heaven HDMI

Digital interconnect cables require extremely accurate impedance characteristics, close tolerances and consistent geometry–especially when it comes to high-performance HDMI cables. To stand any chance of meeting HDMI’s exacting specification and transfer standards demands exceptional consistency from both the cable and the termination. The only way to guarantee that is to bring manufacturing and quality control in-house. The Blue Heaven HDMI Cable is entirely manufactured and hand-terminated at the Nordost factory in the USA, using our proprietary Micro Mono-Filament construction to deliver superior electrical and mechanical characteristics. It is the only way we can guarantee a cable that will be absolutely consistent in performance and deliver the movie and musical performances that your system is really capable of. Blue Heaven HDMI is one cable you really can rely on to deliver on time, every time.

Nordost Blue Heaven HDMI

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος
The Blue Heaven Digital Interconnect is a true 75 Ohm conductor. Employing a Micro Mono-Filament, co-axial construction. This advanced topology allows us to achieve superior electrical performance and geometrical accuracy, irrespective of cable length. The Blue Heaven Digital Interconnect ensures high-speed, low-loss characteristics and, due to its BNC termination, the 75 Ohm standard is maintained, even across the connectors. Each BNC connector is supplied with a gold-plated RCA adaptor, keeping the cable consistent in performance across any combination of co-axial inputs or outputs. To accommodate even more applications, this cable is also available in a BNC to 3.5mm mono mini configuration.
Quick view
Add to compare
Add to wishlist

Nordost Blue Heaven Digital

,
€219.00 – €315.00

Nordost Blue Heaven Digital

The Blue Heaven Digital Interconnect is a true 75 Ohm conductor. Employing a Micro Mono-Filament, co-axial construction. This advanced topology allows us to achieve superior electrical performance and geometrical accuracy, irrespective of cable length. The Blue Heaven Digital Interconnect ensures high-speed, low-loss characteristics and, due to its BNC termination, the 75 Ohm standard is maintained, even across the connectors. Each BNC connector is supplied with a gold-plated RCA adaptor, keeping the cable consistent in performance across any combination of co-axial inputs or outputs. To accommodate even more applications, this cable is also available in a BNC to 3.5mm mono mini configuration.

Nordost Blue Heaven Digital

Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος