Show sidebar
Show 24 48 64
Filters
Filter by brand
VINCENT SV-200 With the SV-200 we present the little brother of the SV-237MK and the SV-700. Despite the compact construction only a few compromises had to be made. A high dynamic and a low noise level stand out for this amplifier. The music signal is conditioned through two 6N1 tubes.
Compare
Quick view
Add to wishlist

VINCENT SV-200

,
€999.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

VINCENT SV-200

VINCENT SV-200With the SV-200 we present the little brother of the SV-237MK and the SV-700. Despite the compact construction only a few compromises had to be made. A high dynamic and a low noise level stand out for this amplifier. The music signal is conditioned through two 6N1 tubes.

VINCENT SV-200

VINCENT DAC-7 The DAC-7 is Vincent's Digital/Analogue-converter to meet the audio enthusiast's highest demands. The digital inputs support DSD files and operate at a sample rate up to 24bit/192kHz, with the USB input supporting up to 32bit/384kHz. The analogue circuitry is fully balanced and features Vincent's iconic tube output stage.
Compare
Quick view
Add to wishlist

VINCENT DAC-7

,
€1,799.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

VINCENT DAC-7

VINCENT DAC-7The DAC-7 is Vincent's Digital/Analogue-converter to meet the audio enthusiast's highest demands. The digital inputs support DSD files and operate at a sample rate up to 24bit/192kHz, with the USB input supporting up to 32bit/384kHz. The analogue circuitry is fully balanced and features Vincent's iconic tube output stage.

VINCENT DAC-7

VINCENT SA T8 HYBRID Hybrid preamplifier with 4 x 12AX7, 3 x 12AU7 tubes and dual transformers. Remote controlled. Balanced inputs-outputs.
Compare
Quick view
Add to wishlist

VINCENT SA T8 HYBRID

,
€1,889.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

VINCENT SA T8 HYBRID

VINCENT SA T8 HYBRIDHybrid preamplifier with 4 x 12AX7, 3 x 12AU7 tubes and dual transformers. Remote controlled. Balanced inputs-outputs.

VINCENT SA T8 HYBRID

VINCENT PF 2 The Vincent PF-2 powerfilter eliminates all disturbing influences (e.g. buzzing) in your Hifi or Home Cinema system, which is caused by the electricity network. 2 Schuko sockets for digital sources and 4 for analog and/or amplifiers offer sufficient connection options. An automativ overload protection protects the filter.
Compare
Quick view
Add to wishlist

VINCENT PF 2

€559.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

VINCENT PF 2

VINCENT PF 2The Vincent PF-2 powerfilter eliminates all disturbing influences (e.g. buzzing) in your Hifi or Home Cinema system, which is caused by the electricity network. 2 Schuko sockets for digital sources and 4 for analog and/or amplifiers offer sufficient connection options. An automativ overload protection protects the filter.

VINCENT PF 2 powerfilter

VINCENT CD-200 With the CD-200 we present the perfect match for the SV-200. The music signals which are converted by the excellent Burr-Brown chip PCM176, are being prepared by one 6N2 tube. This is responsible for the smooth and natural sound of the music.
Compare
Quick view
Add to wishlist

VINCENT CD-200

,
€1,099.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

VINCENT CD-200

VINCENT CD-200With the CD-200 we present the perfect match for the SV-200. The music signals which are converted by the excellent Burr-Brown chip PCM176, are being prepared by one 6N2 tube. This is responsible for the smooth and natural sound of the music.

VINCENT CD-200

VINCENT SV-737 Our new flagship of the integrated amplifiers. The preamp section was completely new developed and benefits a lot of the SA-T7. Through the build-in Wifi modul the amplifier music streaming could be done and it could be integrated in your home network.
Compare
Quick view
Add to wishlist

VINCENT SV-737

,
€3,399.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

VINCENT SV-737

VINCENT SV-737Our new flagship of the integrated amplifiers. The preamp section was completely new developed and benefits a lot of the SA-T7. Through the build-in Wifi modul the amplifier music streaming could be done and it could be integrated in your home network.

VINCENT SV-737

VINCENT SV-228 The SV-228 is the consistent further development of one of ours successful amplifiers series in the Power Line. In a complete new design, with a VU meter embedded in the front panel, the SV-228 is the legitimate successor of the SV-227 MK.
Compare
Quick view
Add to wishlist

VINCENT SV-228

,
€2,249.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

VINCENT SV-228

VINCENT SV-228The SV-228 is the consistent further development of one of ours successful amplifiers series in the Power Line. In a complete new design, with a VU meter embedded in the front panel, the SV-228 is the legitimate successor of the SV-227 MK.

VINCENT SV-228

VINCENT PHO-300 High Quality phono preamplifier for connecting of a turntable to a usual line input. For the low-noise transmission of the sound signal only selected parts are used. Very complex is also the external power supply which minimizes all influences from outside.
Compare
Quick view
Add to wishlist

VINCENT PHO-300

,
€399.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

VINCENT PHO-300

VINCENT PHO-300High Quality phono preamplifier for connecting of a turntable to a usual line input. For the low-noise transmission of the sound signal only selected parts are used. Very complex is also the external power supply which minimizes all influences from outside.

VINCENT PHO-300

VINCENT DAC 1 MK The DAC-1MK converts digital music files with a max. sampling rate of 32 bit / 384 kHz (DSD). The core is the ES9038 decoder, which processeds the signal fully balanced to the analog section.
Compare
Quick view
Add to wishlist

VINCENT DAC 1 MK

,
€1,359.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

VINCENT DAC 1 MK

VINCENT DAC 1 MKThe DAC-1MK converts digital music files with a max. sampling rate of 32 bit / 384 kHz (DSD). The core is the ES9038 decoder, which processeds the signal fully balanced to the analog section.

VINCENT DAC 1 MK

Nordost blue heaven power cord When you listen to your system, you are actually listening to the AC mains supply. This makes the most important cables in your system the ones feeding power into the equipment. They are responsible for the raw material that gets turned into the sound. Nordost employs FEP insulation and its high-speed, low-loss Micro Mono-Filament construction to deliver the best possible power source for your system. The Blue Heaven Power Cord seems like a conventional, three-core AC cord, but don't be fooled. The use of Nordost's proven, proprietary high-speed, low-loss Micro Mono-Filament construction and FEP insulation throughout transforms its performance and the performance of your system. When it comes to your equipment's power supply, you need quality as well as quantity, and the Blue Heaven Power Cord delivers both, making it the crucial foundation on which to build your system's performance. It is available in a full range of AC plug options.
Compare
Quick view
Add to wishlist

Nordost blue heaven power cord

,
€229.00 – €459.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Nordost blue heaven power cord

Nordost blue heaven power cordWhen you listen to your system, you are actually listening to the AC mains supply. This makes the most important cables in your system the ones feeding power into the equipment. They are responsible for the raw material that gets turned into the sound. Nordost employs FEP insulation and its high-speed, low-loss Micro Mono-Filament construction to deliver the best possible power source for your system. The Blue Heaven Power Cord seems like a conventional, three-core AC cord, but don't be fooled. The use of Nordost's proven, proprietary high-speed, low-loss Micro Mono-Filament construction and FEP insulation throughout transforms its performance and the performance of your system. When it comes to your equipment's power supply, you need quality as well as quantity, and the Blue Heaven Power Cord delivers both, making it the crucial foundation on which to build your system's performance. It is available in a full range of AC plug options.

Nordost blue heaven power cord

Q-KORE GROUND WIRE One of the most incessant problems that can plague a hifi system is that annoying hum. Noise is triggered when two circuits carrying different amounts of current overlap each other, or when a loop is created by stray magnetic fields generated by transformers in connected equipment. This problem is only magnified when your system is spread between several connected wall outlets throughout your listening room, as many are. The only solution to this problem: separate the circuits so that no overlaps occur by providing a designated ground. Insulation: Fluorinated Ethylene Propylene (FEP) Construction: Micro Mono-Filament Design Conductors: 1x16 AWG Material: Silver plated 99.9999% solid core OFC Termination: Banana, Spade, RCA, Male-XLR, Female-XLR, BNC, RJ45, USB A, and USB B
Compare
Quick view
Add to wishlist

Nordost Q-KORE GROUND WIRE

,
€269.00
Προσθήκη στο καλάθι

Nordost Q-KORE GROUND WIRE

Q-KORE GROUND WIREOne of the most incessant problems that can plague a hifi system is that annoying hum. Noise is triggered when two circuits carrying different amounts of current overlap each other, or when a loop is created by stray magnetic fields generated by transformers in connected equipment. This problem is only magnified when your system is spread between several connected wall outlets throughout your listening room, as many are. The only solution to this problem: separate the circuits so that no overlaps occur by providing a designated ground. Insulation: Fluorinated Ethylene Propylene (FEP) Construction: Micro Mono-Filament Design Conductors: 1x16 AWG Material: Silver plated 99.9999% solid core OFC Termination: Banana, Spade, RCA, Male-XLR, Female-XLR, BNC, RJ45, USB A, and USB B

Nordost Q-KORE GROUND WIRE

Nordost QLINE GROUND WIRE 2m QUANTUM GROUND WIRE One of the most incessant problems that can plague a hifi system is that annoying hum. Noise is triggered when two circuits carrying different amounts of current overlap each other, or when a loop is created by stray magnetic fields generated by transformers in connected equipment. This problem is only magnified when your system is spread between several connected wall outlets throughout your listening room, as many are. The only solution to this problem: separate the circuits so that no overlaps occur by providing a designated ground. While the easiest way to provide a designated ground for your sound system is achieved by using our QKORE grounding system, homeowners with the ability to install an outdoor ground rod will find Nordost’s QLINE Ground Wire an indispensable tool. Utilizing Nordost’s patented Micro Mono-Filament technology, combined with extruded FEP insulation, the QLINE is the missing link needed to complete the circuit —connecting the QBASE ground post to a designated, external ground rod or grounding box, through its uniquely low resistance path. Proper grounding will transform your system, offering enhancements in 3D imaging as well as lowering the noise floor. Nordost’s QLINE is available in multiple lengths with airtight, waterproof terminations in order to accommodate your specific needs. It is important to recognize, that while installing a designated ground for your hifi system is the most efficient and direct approach to eliminate ground loops and AC hum, there are some states and countries that prohibit the use of a second ground. Please consult a local electrician to ensure that the improvements you make on your sound system remain to code.
Compare
Quick view
Add to wishlist

Nordost QLINE GROUND WIRE

,
€399.00
Προσθήκη στο καλάθι

Nordost QLINE GROUND WIRE

Nordost QLINE GROUND WIRE2m QUANTUM GROUND WIRE One of the most incessant problems that can plague a hifi system is that annoying hum. Noise is triggered when two circuits carrying different amounts of current overlap each other, or when a loop is created by stray magnetic fields generated by transformers in connected equipment. This problem is only magnified when your system is spread between several connected wall outlets throughout your listening room, as many are. The only solution to this problem: separate the circuits so that no overlaps occur by providing a designated ground. While the easiest way to provide a designated ground for your sound system is achieved by using our QKORE grounding system, homeowners with the ability to install an outdoor ground rod will find Nordost’s QLINE Ground Wire an indispensable tool. Utilizing Nordost’s patented Micro Mono-Filament technology, combined with extruded FEP insulation, the QLINE is the missing link needed to complete the circuit —connecting the QBASE ground post to a designated, external ground rod or grounding box, through its uniquely low resistance path. Proper grounding will transform your system, offering enhancements in 3D imaging as well as lowering the noise floor. Nordost’s QLINE is available in multiple lengths with airtight, waterproof terminations in order to accommodate your specific needs. It is important to recognize, that while installing a designated ground for your hifi system is the most efficient and direct approach to eliminate ground loops and AC hum, there are some states and countries that prohibit the use of a second ground. Please consult a local electrician to ensure that the improvements you make on your sound system remain to code.

Nordost QLINE GROUND WIRE

Nordost QB4 MKII The essence of the QBASE-Mark II concept is a straight-line AC distribution path, combined with star-earthed topology for connection to a clean ground. By eliminating any form of in-line filtering or active circuitry we maintain the lowest possible AC supply impedance, while a tiny lift in the earth impedance of all but one of the output sockets routes the signal grounds directly to the center of the star and the clean earth terminal. Clearly identified on the casework, this Primary Earth socket is at the center of your system’s performance, literally and metaphorically. It defines both the order in which you connect your components and also, their listening priority in your musical enjoyment, allowing you to further optimize the performance of your primary sources.
Compare
Quick view
Add to wishlist

Nordost QB4 MKII

€1,089.00
Προσθήκη στο καλάθι

Nordost QB4 MKII

Nordost QB4 MKIIThe essence of the QBASE-Mark II concept is a straight-line AC distribution path, combined with star-earthed topology for connection to a clean ground. By eliminating any form of in-line filtering or active circuitry we maintain the lowest possible AC supply impedance, while a tiny lift in the earth impedance of all but one of the output sockets routes the signal grounds directly to the center of the star and the clean earth terminal. Clearly identified on the casework, this Primary Earth socket is at the center of your system’s performance, literally and metaphorically. It defines both the order in which you connect your components and also, their listening priority in your musical enjoyment, allowing you to further optimize the performance of your primary sources.

Nordost QB4 MKII

Compare
Quick view
Add to wishlist

Nordost QRT Qv2

€405.00
Προσθήκη στο καλάθι

Nordost QRT Qv2

Nordost QRT Qv2

Thanks to the experience acquired in the fabrication of successful products such as the Blue Heaven HDMI and USB 2.0 cables, Nordost can now further refine digital leads through its most current, proprietary technology. The Heimdall 2 USB 2.0 is constructed from 4 x 20 AWG stranded, silver-plated 99.99999% OFC conductors, arranged in a precise, twisted double helix in order to ensure character impedance, reduce noise and minimize cross-talk contamination. In order to increase dielectric, the conductors are suspended in Nordost’s proprietary FEP Dual Mono-Filament, which is newly optimized to increase flexibility and mechanical damping. Add a dual layer silver foil jacket and silver braided shield and the Heimdall 2’s extreme data transmission speeds surpass the USB 2.0 standards. To further up the ante, the new Heimdall 2 USB 2.0 is now implementing mechanically tuned lengths. This technique, used in Nordost’s Odin, Norse 2 and Valhalla 2 ranges, reduces internal microphonics and high-frequency impedance resonance, which ultimately allows you to enjoy the dynamics, coherence and balance of live music played in the comfort of your own listening room.
Compare
Quick view
Add to wishlist

Nordost Heimdall 2 USB

,
€489.00
Προσθήκη στο καλάθι

Nordost Heimdall 2 USB

Thanks to the experience acquired in the fabrication of successful products such as the Blue Heaven HDMI and USB 2.0 cables, Nordost can now further refine digital leads through its most current, proprietary technology. The Heimdall 2 USB 2.0 is constructed from 4 x 20 AWG stranded, silver-plated 99.99999% OFC conductors, arranged in a precise, twisted double helix in order to ensure character impedance, reduce noise and minimize cross-talk contamination. In order to increase dielectric, the conductors are suspended in Nordost’s proprietary FEP Dual Mono-Filament, which is newly optimized to increase flexibility and mechanical damping. Add a dual layer silver foil jacket and silver braided shield and the Heimdall 2’s extreme data transmission speeds surpass the USB 2.0 standards.To further up the ante, the new Heimdall 2 USB 2.0 is now implementing mechanically tuned lengths. This technique, used in Nordost’s Odin, Norse 2 and Valhalla 2 ranges, reduces internal microphonics and high-frequency impedance resonance, which ultimately allows you to enjoy the dynamics, coherence and balance of live music played in the comfort of your own listening room.

Nordost Heimdall 2 USB

Nordost QRT 1 QK1 AC ENHANCER The QKOIL QK1 AC Enhancer uses a load resonating coil (LRC) to generate a passive electronic field that has a beneficial sonic effect on the AC current. Like the QV2, The QKOIL provides a vital solution to the issues of AC quality and audio/video performance, but unlike the QVIBE, the new QK1 achieves this by using an LRC furnished with Nordost’s patented Micro Mono-Filament technology. Using our MMF technology in a loading application prevents time delay and distortion of the transmitted signal, making the AC current that much closer to the desired “distortionless condition”. The Sensory results: an improvement in the overtones and pacing of the music as well as a greater sharpness, depth and focus of visual qualities. The QKOIL is the entry level product in the QRT range, a family of modular, non-intrusive innovations that deliver measurable sonic enhancements and provide power in the purist way. Like other QRT products, the benefits are cumulative and QK1s are even more impressive when applied collectively. It can be used as a “stand alone” product or to complement a full QRT system with QBASE-Mark II, QX4, QX2 and especially QV2 units.. The QK1 is housed in a mechanically tuned carbon-fiber body and equipped with either a US (NEMA) or EU (Schuko) connector. It is compatible with voltages from 110V to 240V, and can be used with an AUS or UK adaptor if required. Plug the QKOIL into any spare socket on your system’s AC Line and experience first-hand the surprising yet indisputable effect it will have on you’re A/V components. • Generates a passive electronic field • Allows for greater musicality and improves tonal balance • Increases clarity of imaging, including sharpness, depth and focus • Lowers the noise floor • Load resonating coil using patented Micro Mono-Filament technology • Mechanically tuned carbon-fiber body
Compare
Quick view
Add to wishlist

Nordost QRT 1

€285.00
Προσθήκη στο καλάθι

Nordost QRT 1

Nordost QRT 1QK1 AC ENHANCER The QKOIL QK1 AC Enhancer uses a load resonating coil (LRC) to generate a passive electronic field that has a beneficial sonic effect on the AC current. Like the QV2, The QKOIL provides a vital solution to the issues of AC quality and audio/video performance, but unlike the QVIBE, the new QK1 achieves this by using an LRC furnished with Nordost’s patented Micro Mono-Filament technology. Using our MMF technology in a loading application prevents time delay and distortion of the transmitted signal, making the AC current that much closer to the desired “distortionless condition”. The Sensory results: an improvement in the overtones and pacing of the music as well as a greater sharpness, depth and focus of visual qualities. The QKOIL is the entry level product in the QRT range, a family of modular, non-intrusive innovations that deliver measurable sonic enhancements and provide power in the purist way. Like other QRT products, the benefits are cumulative and QK1s are even more impressive when applied collectively. It can be used as a “stand alone” product or to complement a full QRT system with QBASE-Mark II, QX4, QX2 and especially QV2 units.. The QK1 is housed in a mechanically tuned carbon-fiber body and equipped with either a US (NEMA) or EU (Schuko) connector. It is compatible with voltages from 110V to 240V, and can be used with an AUS or UK adaptor if required. Plug the QKOIL into any spare socket on your system’s AC Line and experience first-hand the surprising yet indisputable effect it will have on you’re A/V components. • Generates a passive electronic field • Allows for greater musicality and improves tonal balance • Increases clarity of imaging, including sharpness, depth and focus • Lowers the noise floor • Load resonating coil using patented Micro Mono-Filament technology • Mechanically tuned carbon-fiber body

Nordost QRT 1

Compare
Quick view
Add to wishlist

Nordost WonderSolder ασημοκόλληση

€189.00
Προσθήκη στο καλάθι

Nordost WonderSolder ασημοκόλληση

Nordost WonderSolder ασημοκόλληση

Nordost VALHALLA2 VALHALLA2 ANALOG INTERCONNECT The Valhalla 2 Interconnect consists of 10 conductors made from solid, optimized diameter 99.999999% oxygen free copper, each plated with 85 microns of silver. Its surface is highly polished and treated before a precision Dual Mono-Filament wrap is applied. A precision FEP tube is then extruded over each conductor. The ten FEP tubes are then bonded with a proprietary technique to create a tubular interconnect cable, enclosed in two layers of silver shielding. The V2 interconnect is offered with either RCA or XLR HOLO:PLUG® connectors. V2 is extremely fast, at over 87% the speed of light. It transmits wide bandwidth signals with incredible speed and minimum phase shift. The V2 cable is state of the art, bettered only by the mighty Odin. It delivers incredible transient response and dynamic resolution so that no musical detail is lost. Each Valhalla 2 interconnect cable is hand built in the USA with HOLO:PLUG® RCA phono plugs or HOLO:PLUG® XLR connectors.
Compare
Quick view
Add to wishlist

Nordost VALHALLA2

,
€8,549.00 – €10,939.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Nordost VALHALLA2

Nordost VALHALLA2VALHALLA2 ANALOG INTERCONNECT The Valhalla 2 Interconnect consists of 10 conductors made from solid, optimized diameter 99.999999% oxygen free copper, each plated with 85 microns of silver. Its surface is highly polished and treated before a precision Dual Mono-Filament wrap is applied. A precision FEP tube is then extruded over each conductor. The ten FEP tubes are then bonded with a proprietary technique to create a tubular interconnect cable, enclosed in two layers of silver shielding. The V2 interconnect is offered with either RCA or XLR HOLO:PLUG® connectors. V2 is extremely fast, at over 87% the speed of light. It transmits wide bandwidth signals with incredible speed and minimum phase shift. The V2 cable is state of the art, bettered only by the mighty Odin. It delivers incredible transient response and dynamic resolution so that no musical detail is lost. Each Valhalla 2 interconnect cable is hand built in the USA with HOLO:PLUG® RCA phono plugs or HOLO:PLUG® XLR connectors.

Nordost VALHALLA2

Nordost Tyr2 TYR 2 ANALOG INTERCONNECT Norse 2 Series interconnects deliver a level of performance not previously possible at their price points. Nordost’s proprietary Dual Mono-Filament construction, first introduced on the legendary Valhalla reference cables, creates a virtual air dielectric complete with an elegantly engineered suspension system. When combined with silver-plated OFC solid core conductors and FEP insulation throughout, the result is the ideal electrically and mechanically controlled construction for ultra-fast, low-loss signal transfer. Optimized conductor dimensions significantly extend the musical performance of the new Norse 2 Series, finally allowing your equipment to deliver its full performance potential, while the consistency of design and materials across the entire Norse 2 Series means that you can easily prioritize a system-wide solution without compromising the coherence of your cables.
Compare
Quick view
Add to wishlist

Nordost Tyr2

,
€2,669.00 – €3,559.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Nordost Tyr2

Nordost Tyr2 TYR 2 ANALOG INTERCONNECT Norse 2 Series interconnects deliver a level of performance not previously possible at their price points. Nordost’s proprietary Dual Mono-Filament construction, first introduced on the legendary Valhalla reference cables, creates a virtual air dielectric complete with an elegantly engineered suspension system. When combined with silver-plated OFC solid core conductors and FEP insulation throughout, the result is the ideal electrically and mechanically controlled construction for ultra-fast, low-loss signal transfer. Optimized conductor dimensions significantly extend the musical performance of the new Norse 2 Series, finally allowing your equipment to deliver its full performance potential, while the consistency of design and materials across the entire Norse 2 Series means that you can easily prioritize a system-wide solution without compromising the coherence of your cables.

Nordost Tyr2

Nordost 14-2 speaker cable Nordost’s 14-2 Speaker Cable uses two 14 AWG, 99.9999% OFC stranded conductors, which have been extruded with premium PVC. This heavy gauged speaker cable is specifically constructed for in-wall installation. As such, Nordost’s 14-2 Speaker Cable is RoHS Compliant and has a UL rating of CL3, which is rated for up to 300 volts. The 14-2 Speaker Cable’s durability and flexibility make it the perfect solution for snaking your speaker cables through walls, giving your listening room a sleek look without compromising the sound and integrity of your sound system.
Compare
Quick view
Add to wishlist

Nordost 14-2 speaker cable

,
€16.00 – €48.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Nordost 14-2 speaker cable

Nordost 14-2 speaker cableNordost’s 14-2 Speaker Cable uses two 14 AWG, 99.9999% OFC stranded conductors, which have been extruded with premium PVC. This heavy gauged speaker cable is specifically constructed for in-wall installation. As such, Nordost’s 14-2 Speaker Cable is RoHS Compliant and has a UL rating of CL3, which is rated for up to 300 volts. The 14-2 Speaker Cable’s durability and flexibility make it the perfect solution for snaking your speaker cables through walls, giving your listening room a sleek look without compromising the sound and integrity of your sound system.

Nordost 14-2 speaker cable

Nordost Superflatline speaker cable The SuperFlatline Speaker Cable is a true Nordost classic. This highly sought after product offers detail, clarity, and purity throughout the whole frequency spectrum, from subsonic lows to ultrasonic highs. The SuperFlatline Speaker Cable consists of sixteen 23 AWG, solid core, flat, rectangular, copper conductors. These conductors undergo an innovative precision FEP extrusion process, which lowers the capacitance and increases the bandwidth of the cable dramatically, enhancing accuracy and speed of signal transfer. This high quality, versatile cable can be used in any system. When used in a shotgun configuration, the SuperFlatline is capable of carrying high currents (up to 12.5 amps at 300 volts), while its 16 conductors can easily facilitate bi-wiring or bi-amping. In addition to the impressive quality of performance this cable can achieve, the flat geometry of SuperFlatline makes it possible to run lengths under carpets for easy and discreet installation.
Compare
Quick view
Add to wishlist

Nordost Superflatline speaker cable

,
€419.00 – €539.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Nordost Superflatline speaker cable

Nordost Superflatline speaker cableThe SuperFlatline Speaker Cable is a true Nordost classic. This highly sought after product offers detail, clarity, and purity throughout the whole frequency spectrum, from subsonic lows to ultrasonic highs. The SuperFlatline Speaker Cable consists of sixteen 23 AWG, solid core, flat, rectangular, copper conductors. These conductors undergo an innovative precision FEP extrusion process, which lowers the capacitance and increases the bandwidth of the cable dramatically, enhancing accuracy and speed of signal transfer. This high quality, versatile cable can be used in any system. When used in a shotgun configuration, the SuperFlatline is capable of carrying high currents (up to 12.5 amps at 300 volts), while its 16 conductors can easily facilitate bi-wiring or bi-amping. In addition to the impressive quality of performance this cable can achieve, the flat geometry of SuperFlatline makes it possible to run lengths under carpets for easy and discreet installation.

Nordost Superflatline speaker cable

Nordost Tyr 2 USB The Tyr 2 USB 2.0 Cable is guaranteed to take your computer audio system to the next level. It implements a solid core design, which is essential when working with a cable of this caliber. This essential upgrade completely eliminates the negative effects of strand interaction and skin effect. Each of the four 20 AWG, solid core conductors is then wrapped in Nordost’s proprietary Dual Mono-Filament technology before being enclosed in extruded FEP, which lowers the capacitance of the cable, both increasing signal speed and bandwidth. The Tyr 2 USB 2.0 Cable arranges its conductors in a precise, twisted, double helix geometry in order to ensure characteristic impedance, minimize cross-talk, and reduce noise. To even further reduce noise, and protect the USB signal path from any external interference, Nordost employs a dual-layer, silver foil jacket and silver braided shield. Finally, before being terminated with gold-plated, fully shielded connectors, the Tyr 2 USB is cut to mechanically tuned lengths, which reduce internal microphonics and high-frequency impedance resonance. As with all Nordost products, the Tyr 2 USB 2.0 Cable is handmade in the USA, ensuring a high level of production quality and the extreme precision necessary to manufacture USB cables capable of overcoming jitter and timing errors. The Tyr 2 USB 2.0 Cable is the solution you need in order to achieve the superb sound staging, wide dynamic range, and precise timing you have been looking for in computer audio.
Compare
Quick view
Add to wishlist

Nordost Tyr 2 USB

,
€1,269.00 – €2,339.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Nordost Tyr 2 USB

Nordost Tyr 2 USBThe Tyr 2 USB 2.0 Cable is guaranteed to take your computer audio system to the next level. It implements a solid core design, which is essential when working with a cable of this caliber. This essential upgrade completely eliminates the negative effects of strand interaction and skin effect. Each of the four 20 AWG, solid core conductors is then wrapped in Nordost’s proprietary Dual Mono-Filament technology before being enclosed in extruded FEP, which lowers the capacitance of the cable, both increasing signal speed and bandwidth. The Tyr 2 USB 2.0 Cable arranges its conductors in a precise, twisted, double helix geometry in order to ensure characteristic impedance, minimize cross-talk, and reduce noise. To even further reduce noise, and protect the USB signal path from any external interference, Nordost employs a dual-layer, silver foil jacket and silver braided shield. Finally, before being terminated with gold-plated, fully shielded connectors, the Tyr 2 USB is cut to mechanically tuned lengths, which reduce internal microphonics and high-frequency impedance resonance. As with all Nordost products, the Tyr 2 USB 2.0 Cable is handmade in the USA, ensuring a high level of production quality and the extreme precision necessary to manufacture USB cables capable of overcoming jitter and timing errors. The Tyr 2 USB 2.0 Cable is the solution you need in order to achieve the superb sound staging, wide dynamic range, and precise timing you have been looking for in computer audio.

Nordost Tyr 2 USB

Nordost Blue Heaven USB The Blue Heaven USB 2.0 Data Cable sets a new technological and performance standard when it comes to computer audio. Nordost's proven, proprietary FEP and Micro Mono-Filament construction delivers low dielectric loss and minimizes cable induced timing errors in critical digital signals. This cable is purpose built from four OFC conductors, optimally dimensioned for digital signal transfer. These are precision wound, double shielded and terminated, all in the USA to ensure geometrical and sonic consistency. Full metal jacket, in-molded connectors extend both precision and shielding, while gold-plated contacts maintain optimum signal transfer. The result is an ultra high-speed, low-loss cable, specifically designed to deliver the best possible performance from computer audio sources. Superior technology, superior materials and superior build quality all add up to one thing–superior sound.
Compare
Quick view
Add to wishlist

Nordost Blue Heaven USB

,
€249.00 – €649.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Nordost Blue Heaven USB

Nordost Blue Heaven USBThe Blue Heaven USB 2.0 Data Cable sets a new technological and performance standard when it comes to computer audio. Nordost's proven, proprietary FEP and Micro Mono-Filament construction delivers low dielectric loss and minimizes cable induced timing errors in critical digital signals. This cable is purpose built from four OFC conductors, optimally dimensioned for digital signal transfer. These are precision wound, double shielded and terminated, all in the USA to ensure geometrical and sonic consistency. Full metal jacket, in-molded connectors extend both precision and shielding, while gold-plated contacts maintain optimum signal transfer. The result is an ultra high-speed, low-loss cable, specifically designed to deliver the best possible performance from computer audio sources. Superior technology, superior materials and superior build quality all add up to one thing–superior sound.

Nordost Blue Heaven USB

Nordost HEIMDALL 2 tonearm cable Phono cartridges, with their incredibly low signal levels and clearly defined electrical requirements demand dedicated cable designs. In order to deal with delicate signals, Nordost’s proprietary Dual Mono-Filament construction creates a virtual air dielectric around dimensionally optimized, silver-plated OFC solid core conductors. When combined with FEP insulation throughout, the result is the ideal electrically and mechanically controlled construction for ultra-fast, low-loss transfer of these extremely delicate signals. With effective shielding, dual grounding and a full range of termination options in both single-ended and balanced configurations, the Heimdall 2 Tonearm Cable allows you to specify the topology required to liberate the musical performance locked in the grooves on your LP collection. This dedicated tonearm lead will finally allow your record player to deliver its full performance potential. Its position, right at the start of the signal chain, and the fragile nature of the signals it carries make it doubly critical, and deliver a double performance benefit when you get it right. The consistency of design and materials across the entire Norse 2 Series means that you can take full advantage of a system-wide solution without compromising the coherence of your cables, all the way from the base of your tonearm.
Compare
Quick view
Add to wishlist

Nordost HEIMDALL 2 tonearm cable

,
€619.00 – €719.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Nordost HEIMDALL 2 tonearm cable

Nordost HEIMDALL 2 tonearm cablePhono cartridges, with their incredibly low signal levels and clearly defined electrical requirements demand dedicated cable designs. In order to deal with delicate signals, Nordost’s proprietary Dual Mono-Filament construction creates a virtual air dielectric around dimensionally optimized, silver-plated OFC solid core conductors. When combined with FEP insulation throughout, the result is the ideal electrically and mechanically controlled construction for ultra-fast, low-loss transfer of these extremely delicate signals. With effective shielding, dual grounding and a full range of termination options in both single-ended and balanced configurations, the Heimdall 2 Tonearm Cable allows you to specify the topology required to liberate the musical performance locked in the grooves on your LP collection. This dedicated tonearm lead will finally allow your record player to deliver its full performance potential. Its position, right at the start of the signal chain, and the fragile nature of the signals it carries make it doubly critical, and deliver a double performance benefit when you get it right. The consistency of design and materials across the entire Norse 2 Series means that you can take full advantage of a system-wide solution without compromising the coherence of your cables, all the way from the base of your tonearm.

Nordost HEIMDALL 2 tonearm cable