SKYANALOG P1M MC

Περιγραφή

SKYANALOG P1M MC

Κεφαλή κινητού πηνίου SKYANALOG P1M MC με βάρος 8.9 γρ. με cantilever αλουμινίου βελόνα fineline και έξοδο 0,4 mV

SKYANALOG P1M MC

• SKYANALOG P1M MC CARTRIDGE
• Skyanalog P1M capsule has a black aluminum housing, in which an Al stylus MC type motor with a Fineline diamond stylus profile has been installed. The collection needle has a 5x50um grind. The needle axis was placed at an angle of 20 degrees to the end of the bobbin body. The manufacturer recommends the 8.9g pill for light heavy arms, with an effective weight of 11-14g. The output voltage is 0.4 mV at a rate of 3.54 vm/s. The internal resistance of the pure copper crossover winding is 6.5 ohms, which should be terminated between 100 and 220 ohms per manufacturer’s recommendations. The pickup’s frequency response is accurate to +/-1dB between 20Hz and 20Khz, while channel separation is better than 30dB at 1Khz and channel balance is better than 0.5dB, which is an excellent value. The recommended needle pressure is 1.6 to 2.0 g, the recommended optimal value is 1.8 g.
• The van’s break-in period is about 30 hours at an average temperature of 23 degrees. The pickup box also includes screws and an Allen key for easy installation.
• Their sound is open, airy, flowing, yet pleasingly analog. Its full-bodied low-end doesn’t settle into the music, but at the same time follows the silky, well-articulated tonality of the midrange with appropriate rhythmicity. The high end is not especially bright, with an exaggerated character, but it has a sufficiently airy resolution, so that the jazz-acoustic genre is not a problem, as well as lighter pop-rock music.
• To make the best possible use of the sound quality, it is worth pairing it with quality phono preamps.
• SKYANALOG P1M MC CARTRIDGE
  MC pickup – low signal output type
  Cantilever: Aluminum
  Needle point – diamond
  Needle profile – fineline
  Needle Nose Radius – 5x50uM
  VTA – 20 degrees
  Coil – pure copper cross wound
  Weight – 8.9g
  Output signal level: 0.4 mV at a velocity of 3.54 cm/s
  Internal resistance – 6.5ohm
  Recommended termination impedance – 100-220ohm
  Dynamic compliance – 12uM/mN
  Tracking capability at 315 Hz with 2 g – 80 uM stylus pressure
  Needle pressure limits – 1.6 – 2g
  Recommended stylus pressure: 1.8 g
  Recommended arm: medium weight (11-14 g effective weight)
  Filming period: 30 h
  Skyanalog give no warranty to broken cantilever or diamond.
• Δείτε εδώ τα υπόλοιπα προϊόντα μας.

Δείτε προσφορές στο BLOGSPOT μας