Show sidebar
Show 24 48 64
Filters
CHORD ELECTRONICS DAVE
Add to compare
Quick view
Add to wishlist

CHORD ELECTRONICS DAVE

,
14,950.00€
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

CHORD ELECTRONICS DAVE

CHORD ELECTRONICS DAVE

CHORD ELECTRONICS DAVE

-17%
GRANDINOTE Solo Integrated We are proud to introduce a new product that is the result of a long period of design and development. The new integrated amplifier Solo. We have concentrated years of experience in HiFi development into this new creation. Everything is improved not only the audio quality and the power (now 60W in class A) but even a new design with a huge 9” display full of functions like VUmeter, spectrum analyser and more. Grandinote is technology, innovation, flexibility, design and absolute audio quality. MAGNETOSOLID TECHNOLOGY Magnetosolid is a unique technology from Grandinote, designed by engineer Massimiliano Magri and a great expression of Made in Italy. Created in 2002 in its first versions, it integrates two words in its name: Magneto and Solid. Magneto because of its ferromagnetic components and output transformers and Solid because of its solid-state components. It is a circuit that brings the best of tubes and solid-state technology to our amplifiers. As with tube systems, the circuit is as simple and straightforward as possible, but with all the qualities of solid state. The main advantage of tubes over solid state, is the absence of parasitic capacitance. Our Magnetosolid technology, has overcome even this obstacle by delivering a sound that is absolutely faithful to the source without the loss of any detail and with the ability to control any speaker. The frequency response of Magnetosolid amplifiers is the best on the market, superior to either tube or solid-state systems. All components of the sound message are in place. Detail, presence, full dynamic and control thanks also to an absolute reference damping factor. In the Solo and in the new Grandinote Magnetosolid amplifiers the audio circuit has been further improved compared to previous ones such as the Shinai, with voltages and polarizations even richer and oversized. An increase of over 50% going from 60V to 96V while maintaining the purity of the signal unchanged. POWER SUPPLY Grandinote's new Magnetosolid amplifiers are now equipped with a new switching power supply with electro-medical rigor standards and a new concept. All circuits are pure class A with an always constant current. The absorption does not depend on the signal and this means that the power supply will always supply the same current. It is very important to underline that our switching power supplies never modulate the current based on the signal. The development of our new switching power supplies has broken down the paradigm of toroidal as the only solution. With our design they are now qualitatively on par with toroidals and perfectly integrated with Grandinote's Magnetosolid circuits in pure class A. With our new power supply, we are able to choose the supply voltages for the output stages and able to select the Solo polarization in function of the nominal impedance speakers. Solo is now optimised for 8, or 4 Ohm speakers, avoiding unnecessary power losses and with a greater overall performance. We have also increased the size of the heatsinks, now they are a 10% bigger than in the old Shinai and that allows the Solo to deliver more power while heating up less and be more comfortable to use in hot seasons. VOLUME CONTROL Now we have resistors combined with reed relays. Reed relays are the best contact in existence cause they works in vacuum, no impurities, no parasitic capacitances like in solid-state relays and guarantee the passage of every smallest nuance of the signal, without limiting its frequency response, without any distortion! The configuration of these resistors is a pure “ladder" with two blocks of resistors, only in parallel with each other. This configuration use the same principle of the volume regulators with rotary switches, studded with resistors, but with 2 big improvements: No rotary switch in the world has the same contact quality as a reed relay (vacuum) - these switches have few steps, a far cry from the 68 steps + 0 of our regulator. The Shinai has only 33 steps plus 0.
Add to compare
Quick view
Add to wishlist

GRANDINOTE Solo Integrated

,
Original price was: 18,000.00€.Η τρέχουσα τιμή είναι: 14,990.00€.
Προσθήκη στο καλάθι

GRANDINOTE Solo Integrated

GRANDINOTE Solo Integrated We are proud to introduce a new product that is the result of a long period of design and development. The new integrated amplifier Solo. We have concentrated years of experience in HiFi development into this new creation. Everything is improved not only the audio quality and the power (now 60W in class A) but even a new design with a huge 9” display full of functions like VUmeter, spectrum analyser and more. Grandinote is technology, innovation, flexibility, design and absolute audio quality. MAGNETOSOLID TECHNOLOGY Magnetosolid is a unique technology from Grandinote, designed by engineer Massimiliano Magri and a great expression of Made in Italy. Created in 2002 in its first versions, it integrates two words in its name: Magneto and Solid. Magneto because of its ferromagnetic components and output transformers and Solid because of its solid-state components. It is a circuit that brings the best of tubes and solid-state technology to our amplifiers. As with tube systems, the circuit is as simple and straightforward as possible, but with all the qualities of solid state. The main advantage of tubes over solid state, is the absence of parasitic capacitance. Our Magnetosolid technology, has overcome even this obstacle by delivering a sound that is absolutely faithful to the source without the loss of any detail and with the ability to control any speaker. The frequency response of Magnetosolid amplifiers is the best on the market, superior to either tube or solid-state systems. All components of the sound message are in place. Detail, presence, full dynamic and control thanks also to an absolute reference damping factor. In the Solo and in the new Grandinote Magnetosolid amplifiers the audio circuit has been further improved compared to previous ones such as the Shinai, with voltages and polarizations even richer and oversized. An increase of over 50% going from 60V to 96V while maintaining the purity of the signal unchanged. POWER SUPPLY Grandinote's new Magnetosolid amplifiers are now equipped with a new switching power supply with electro-medical rigor standards and a new concept. All circuits are pure class A with an always constant current. The absorption does not depend on the signal and this means that the power supply will always supply the same current. It is very important to underline that our switching power supplies never modulate the current based on the signal. The development of our new switching power supplies has broken down the paradigm of toroidal as the only solution. With our design they are now qualitatively on par with toroidals and perfectly integrated with Grandinote's Magnetosolid circuits in pure class A. With our new power supply, we are able to choose the supply voltages for the output stages and able to select the Solo polarization in function of the nominal impedance speakers. Solo is now optimised for 8, or 4 Ohm speakers, avoiding unnecessary power losses and with a greater overall performance. We have also increased the size of the heatsinks, now they are a 10% bigger than in the old Shinai and that allows the Solo to deliver more power while heating up less and be more comfortable to use in hot seasons. VOLUME CONTROL Now we have resistors combined with reed relays. Reed relays are the best contact in existence cause they works in vacuum, no impurities, no parasitic capacitances like in solid-state relays and guarantee the passage of every smallest nuance of the signal, without limiting its frequency response, without any distortion! The configuration of these resistors is a pure “ladder" with two blocks of resistors, only in parallel with each other. This configuration use the same principle of the volume regulators with rotary switches, studded with resistors, but with 2 big improvements: No rotary switch in the world has the same contact quality as a reed relay (vacuum) - these switches have few steps, a far cry from the 68 steps + 0 of our regulator. The Shinai has only 33 steps plus 0.

GRANDINOTE Solo Integrated

Είμαστε περήφανοι που παρουσιάζουμε ένα νέο προϊόν που είναι αποτέλεσμα μακράς περιόδου σχεδιασμού και ανάπτυξης. Ο νέος ολοκληρωμένος ενισχυτής Solo. Έχουμε συγκεντρώσει την πολυετή εμπειρία στην ανάπτυξη HiFi σε αυτή τη νέα δημιουργία. Όλα είναι βελτιωμένα όχι μόνο στην ποιότητα του ήχου και την ισχύ (τώρα 60W σε τάξη Α), αλλά ακόμη και σε μια νέα σχεδίαση με μια τεράστια οθόνη 9" γεμάτη λειτουργίες όπως VUmeter, αναλυτής φάσματος και πολλά άλλα. Το όνομα Grandinote σημαίνει τεχνολογία, καινοτομία, ευελιξία, σχεδιασμός και απόλυτη ποιότητα ήχου.
Monitor Audio Platinum 300 3G The Platinum 300 3G’s combination of MPD III transducer, 4” RDT III mid-range driver and two 8” RDT III bass drivers allow it to deliver exceptional scale and depth. The worthy flagship of the Platinum Series 3G, this loudspeaker is quite simply the best in its class.
Add to compare
Quick view
Add to wishlist

Monitor Audio Platinum 300 3G

,
15,000.00€
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Monitor Audio Platinum 300 3G

Monitor Audio Platinum 300 3G The Platinum 300 3G’s combination of MPD III transducer, 4” RDT III mid-range driver and two 8” RDT III bass drivers allow it to deliver exceptional scale and depth. The worthy flagship of the Platinum Series 3G, this loudspeaker is quite simply the best in its class.

Monitor Audio Platinum 300 3G

Classe Delta Stereo Amplifier Το Delta STEREO αποστάζει όλη την καινοτομία και τη γνώση της Classé σε έναν συμπαγή στερεοφωνικό ενισχυτή υψηλής απόδοσης. Classe Delta Stereo Amplifier The Delta STEREO distills all of Classé's innovation and knowledge into a compact high-performance stereo amplifier. In situations where dual mono amplifiers can't be accommodated, Delta STEREO offers uncompromizing performance in a single component.
Add to compare
Quick view
Add to wishlist

Classe Delta Stereo Amplifier

,
15,000.00€
Προσθήκη στο καλάθι

Classe Delta Stereo Amplifier

Classe Delta Stereo AmplifierΤο Delta STEREO αποστάζει όλη την καινοτομία και τη γνώση της Classé σε έναν συμπαγή στερεοφωνικό ενισχυτή υψηλής απόδοσης. Classe Delta Stereo Amplifier The Delta STEREO distills all of Classé's innovation and knowledge into a compact high-performance stereo amplifier. In situations where dual mono amplifiers can't be accommodated, Delta STEREO offers uncompromizing performance in a single component.

Classe Delta Stereo Amplifier

J.Sikora Turntables standard line Hi End turntable from J.Sikora, the standard line is a hi end turntable with very high manufacturing standards. The total weight of the turntable reaches 80 kg with only the platter reaching 18 kg. The platter is made of Delrin® and cast iron. The turntable uses materials such as aluminum, brass, copper, inox and bronze. The bearing is inverted with a ceramic ball. The turntable uses 2 DC motors and a rubber belt with an arm (+1 optional). It comes with a heavy-duty clamp and glass mat and external power supply and is available in black or silver.
Add to compare
Quick view
Add to wishlist

J.Sikora Turntables standard line

15,280.00€
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

J.Sikora Turntables standard line

J.Sikora Turntables standard lineHi End turntable from J.Sikora, the standard line is a hi end turntable with very high manufacturing standards. The total weight of the turntable reaches 80 kg with only the platter reaching 18 kg. The platter is made of Delrin® and cast iron. The turntable uses materials such as aluminum, brass, copper, inox and bronze. The bearing is inverted with a ceramic ball. The turntable uses 2 DC motors and a rubber belt with an arm (+1 optional). It comes with a heavy-duty clamp and glass mat and external power supply and is available in black or silver.

J.Sikora Turntables standard line

JADIS I300
Add to compare
Quick view
Add to wishlist

JADIS I300

,
15,490.00€
Προσθήκη στο καλάθι

JADIS I300

JADIS I300

JADIS I300

KONDO GE-1
Add to compare
Quick view
Add to wishlist

KONDO GE-1

,
15,500.00€
Προσθήκη στο καλάθι

KONDO GE-1

KONDO GE-1

KONDO GE-1

Audio Note Meishu Tonmeister phono As with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.
Add to compare
Quick view
Add to wishlist

Audio Note MEISHU Tonmeister phono 300B SE

,
15,680.00€
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Audio Note Meishu Tonmeister phono

Audio Note Meishu Tonmeister phonoAs with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.

Audio Note Meishu Tonmeister phono, ολοκληρωμένος ενισχυτής Single Ended 300b με phono stage

By integrating stronger magnets and a new selection process, the Goldfinger Statement 2.1 sets new standards in sound quality. Its precise reproduction and impressive detail make it an outstanding cartridge for discerning music enthusiasts. The redesign of the cantilever with an optimized angle contributes to improved tracking accuracy. Visually, the Goldfinger Statement V2.1 features a V engraving that underscores its simple elegance and modernity. Another notable change lies in the precision of the new manufacturing process of the gold body, which provides even more geometric stability to the Goldfinger Statement V2.1. This cartridge deserves only the finest recordings of all time. To “feed” the Moving Coil (MC) Goldfinger Statement V2.1 with appropriate music material, clearaudio has established a dedicated music production department specializing in audiophile recordings of all genres. The MC Goldfinger Statement (V1) was the first cartridge with integrated HF shielding. The high sound quality of this world-class cartridge is the result of meticulous detail improvements and fine-tuning of all values. The breakthrough came with the use of a 30% thinner 24-carat gold wire for the coils, a precision-ground gold bracket for securing the magnet block, and a body made of 585 gold – essential core components for the ultimate cartridge masterpiece. A valuable asset that will last for generations. The world-famous Micro-HD diamond ensures the best groove tracking behavior of all time.
Add to compare
Quick view
Add to wishlist

Clearaudio GOLDFINGER STATEMENT

,
15,699.00€
Προσθήκη στο καλάθι

Clearaudio GOLDFINGER STATEMENT

By integrating stronger magnets and a new selection process, the Goldfinger Statement 2.1 sets new standards in sound quality. Its precise reproduction and impressive detail make it an outstanding cartridge for discerning music enthusiasts. The redesign of the cantilever with an optimized angle contributes to improved tracking accuracy. Visually, the Goldfinger Statement V2.1 features a V engraving that underscores its simple elegance and modernity.Another notable change lies in the precision of the new manufacturing process of the gold body, which provides even more geometric stability to the Goldfinger Statement V2.1. This cartridge deserves only the finest recordings of all time. To “feed” the Moving Coil (MC) Goldfinger Statement V2.1 with appropriate music material, clearaudio has established a dedicated music production department specializing in audiophile recordings of all genres. The MC Goldfinger Statement (V1) was the first cartridge with integrated HF shielding. The high sound quality of this world-class cartridge is the result of meticulous detail improvements and fine-tuning of all values. The breakthrough came with the use of a 30% thinner 24-carat gold wire for the coils, a precision-ground gold bracket for securing the magnet block, and a body made of 585 gold – essential core components for the ultimate cartridge masterpiece. A valuable asset that will last for generations. The world-famous Micro-HD diamond ensures the best groove tracking behavior of all time.

the state of the art moving coil mc cartridge of Clearaudio the GOLDFINGER STATEMENT

JADIS SE300B Description The SE300B supplies a power of 10W RMS and functions in pure class-A with single-ended mounting (the two tubes are in parallel) with an automatic bias. The two high voltages, driver and power, have vacuum-tube power supplies. The bandwidth (at –3dB) is from 20Hz to 20kHz, without any feedback. The driver stage, powered at 400V, is built around a double-triode 6SN7. The two elements of the tube are mounted in cascade. The output stage is powered at 320V, which allows the tubes to work in the best conditions.
Add to compare
Quick view
Add to wishlist

JADIS SE300B

,
15,700.00€
Προσθήκη στο καλάθι

JADIS SE300B

JADIS SE300BDescription The SE300B supplies a power of 10W RMS and functions in pure class-A with single-ended mounting (the two tubes are in parallel) with an automatic bias. The two high voltages, driver and power, have vacuum-tube power supplies. The bandwidth (at –3dB) is from 20Hz to 20kHz, without any feedback. The driver stage, powered at 400V, is built around a double-triode 6SN7. The two elements of the tube are mounted in cascade. The output stage is powered at 320V, which allows the tubes to work in the best conditions.

JADIS SE300B

Bowers & Wilkins 804 D4 For listeners who crave the performance of an 800 Series Diamond tower speaker but prefer a more conventional aesthetic, the 804 D4 is the perfect choice. Its new cabinet and plinth make it our best-performing 804 yet. Classic quality 804 D4 is perhaps more conventional in appearance than other floor-standers in the 800 Series Diamond range, but it’s every bit as sophisticated. Its new Reverse-Wrap cabinet is both a mechanical and acoustic revolution in its class, and its new plinth ensures rock-solid, accurate bass response too.
Add to compare
Quick view
Add to wishlist

Bowers Wilkins 804 D4

,
15,999.00€
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Bowers Wilkins 804 D4

Bowers & Wilkins 804 D4 For listeners who crave the performance of an 800 Series Diamond tower speaker but prefer a more conventional aesthetic, the 804 D4 is the perfect choice. Its new cabinet and plinth make it our best-performing 804 yet. Classic quality 804 D4 is perhaps more conventional in appearance than other floor-standers in the 800 Series Diamond range, but it’s every bit as sophisticated. Its new Reverse-Wrap cabinet is both a mechanical and acoustic revolution in its class, and its new plinth ensures rock-solid, accurate bass response too.

Bowers Wilkins 804 D4

ZYX DIAMOND EX
Add to compare
Quick view
Add to wishlist

ZYX DIAMOND EX

,
16,000.00€
Προσθήκη στο καλάθι

ZYX DIAMOND EX

ZYX DIAMOND EX

ZYX DIAMOND EX

ATC SCM50 SL The ATC SCM50 ASL (active) and ATC SCM50 SL (passive) are designed to perform at their best in the recording studio or at home with the finest quality hi-fi equipment. The monitors’ ability to reproduce music and speech with phenomenal accuracy, transparency and dynamics lies mainly in the SM75-150S soft dome midrange driver. However, recent modifications that include the new ATC SH25-76S tweeter and enhanced port profile have brought about further improvements to all performance parameters. Each drive unit in the active model has its own dedicated and individually matched MOS-FET amplifier, while the 234mm/9″ bass driver incorporates ATC’s unique Super Linear Magnet technology. Our active crossover network consists of a wide band-width, electronically balanced input stage with high common mode rejection and very low distortion. Like the HF, mid and bass drivers, all electronics are designed and manufactured in-house to create a no-compromise active system. In passive form, the SCM50 SL provides broad and symmetrical dispersion, excellent amplitude and phase characteristics throughout the frequency range. Speakers are supplied with stands and fabric wrapped grills.
Add to compare
Quick view
Add to wishlist

ATC SCM50 SL

,
16,000.00€
Προσθήκη στο καλάθι

ATC SCM50 SL

ATC SCM50 SLThe ATC SCM50 ASL (active) and ATC SCM50 SL (passive) are designed to perform at their best in the recording studio or at home with the finest quality hi-fi equipment. The monitors’ ability to reproduce music and speech with phenomenal accuracy, transparency and dynamics lies mainly in the SM75-150S soft dome midrange driver. However, recent modifications that include the new ATC SH25-76S tweeter and enhanced port profile have brought about further improvements to all performance parameters. Each drive unit in the active model has its own dedicated and individually matched MOS-FET amplifier, while the 234mm/9″ bass driver incorporates ATC’s unique Super Linear Magnet technology. Our active crossover network consists of a wide band-width, electronically balanced input stage with high common mode rejection and very low distortion. Like the HF, mid and bass drivers, all electronics are designed and manufactured in-house to create a no-compromise active system. In passive form, the SCM50 SL provides broad and symmetrical dispersion, excellent amplitude and phase characteristics throughout the frequency range. Speakers are supplied with stands and fabric wrapped grills.

ATC SCM50 SL Reference studio monitor

Fyne Audio F704
Add to compare
Quick view
Add to wishlist

Fyne Audio F704

,
16,195.00€
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Fyne Audio F704

Fyne Audio F704

Fyne Audio F704

Audio Note Meishu Tonmeister Line S.E As with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.
Add to compare
Quick view
Add to wishlist

Audio Note Meishu Tonmeister Line 300B SE Silver Edition

,
16,440.00€
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Audio Note Meishu Tonmeister Line S.E

Audio Note Meishu Tonmeister Line S.E As with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.

Audio Note Meishu Tonmeister Line S.E ολοκληρωμένος ενισχυτής SET με 300B

-15%
JADIS I88
Add to compare
Quick view
Add to wishlist

JADIS I88

,
Original price was: 19,350.00€.Η τρέχουσα τιμή είναι: 16,450.00€.
Προσθήκη στο καλάθι

JADIS I88

JADIS I88

JADIS I88

ELECTROCOMPANIET AW 300 M The AW 300 M is Electrocompaniet’s latest Mono Power Amplifier. This amplifier embodies an updated, yet unmistakable Electrocompaniet design, perfectly complementing both current and legacy Electrocompaniet products.
Add to compare
Quick view
Add to wishlist

ELECTROCOMPANIET AW 300 M

,
16,640.00€
Προσθήκη στο καλάθι

ELECTROCOMPANIET AW 300 M

ELECTROCOMPANIET AW 300 MThe AW 300 M is Electrocompaniet’s latest Mono Power Amplifier. This amplifier embodies an updated, yet unmistakable Electrocompaniet design, perfectly complementing both current and legacy Electrocompaniet products.

ELECTROCOMPANIET AW 300 M μονοφωνικοί τελικοί ενισχυτές

BOSENDORFER VC-7
Add to compare
Quick view
Add to wishlist

BOSENDORFER VC-7

,
16,900.00€
Προσθήκη στο καλάθι
BOSENDORFER VC-7
Το BOSENDORFER VC-7 είναι το τελειότερο ηχείο της φιλοσοφίας της σχεδίασης του HANS DEUTCH με τα Resonating Panels, που αποδίδουν τα μπάσα σαν το καπάκι ενός πιάνου! Με 4 πλευρικά μικρά μεγάφωνα full range υψηλής ταχύτητας, με φόρτιση κόρνας - πατέντα του Hans Deutch, που η έξοδος της στο κάτω μέρος του ηχείου ενεργοποιεί τα Resonating Panels, αποδίδει μια εκπομπή σχεδόν 270 ο με βαθιά μπάσα 25Ηz @ 3db
BOSENDORFER VC-7

BOSENDORFER VC-7

Klipsch La Scala AL5 New
Add to compare
Quick view
Add to wishlist

Klipsch La Scala AL5 New

,
16,998.00€
Προσθήκη στο καλάθι

Klipsch La Scala AL5 New

To Klipsch La Scala AL5 New είναι ένα ηχείο θρύλος για τους audiophiles. Αρχικά τα La Scala σχεδιάστηκαν για καθαρή επαγγελματική χρήση, το νέο La Scala AL5 σήμερα να είναι ικανό να αναπαράξει την μουσική με την ανώτερη δυνατή ποιότητα ήχου εως και την παραμικρή της λεπτομέρεια.
Klipsch La Scala AL5 New

Klipsch La Scala AL5 New

ATC SCM50SLT The SCM50 ASLT (active) and SCM50 PSLT (passive) towers are designed to offer exceptional performance and enjoyment to the home hi-fi enthusiast and music lover. The monitors’ ability to reproduce music and speech with phenomenal accuracy, transparency and dynamics lies mainly in the SM75-150S soft dome midrange driver. However, recent modifications that include the new ATC SH25-76S tweeter and enhanced port profile have brought about further improvements to all performance parameters. Each drive unit in the active model has its own dedicated and individually matched MOS-FET amplifier, while the 234mm/9″ bass driver incorporates ATC’s unique Super Linear Magnet technology. Our active crossover network consists of a wide band-width, electronically balanced input stage with high common mode rejection and very low distortion. Like the HF, mid and bass drivers, all electronics are designed and manufactured in-house to create a no-compromise active system. In passive form, the SCM50PSLT provides broad and symmetrical dispersion, excellent amplitude and phase characteristics throughout the frequency range.
Add to compare
Quick view
Add to wishlist

ATC SCM50 PSLT

,
17,000.00€
Προσθήκη στο καλάθι

ATC SCM50 PSLT

ATC SCM50SLT The SCM50 ASLT (active) and SCM50 PSLT (passive) towers are designed to offer exceptional performance and enjoyment to the home hi-fi enthusiast and music lover. The monitors’ ability to reproduce music and speech with phenomenal accuracy, transparency and dynamics lies mainly in the SM75-150S soft dome midrange driver. However, recent modifications that include the new ATC SH25-76S tweeter and enhanced port profile have brought about further improvements to all performance parameters. Each drive unit in the active model has its own dedicated and individually matched MOS-FET amplifier, while the 234mm/9″ bass driver incorporates ATC’s unique Super Linear Magnet technology. Our active crossover network consists of a wide band-width, electronically balanced input stage with high common mode rejection and very low distortion. Like the HF, mid and bass drivers, all electronics are designed and manufactured in-house to create a no-compromise active system. In passive form, the SCM50PSLT provides broad and symmetrical dispersion, excellent amplitude and phase characteristics throughout the frequency range.

ATC SCM50 PSLT αυτό το υψηλής ποιότητας ηχείο είναι ίσως το γνωστότερο στούντιο μόνιτορ της εποχής μας

BRYSTON 28B³
Add to compare
Quick view
Add to wishlist

BRYSTON 28B³

,
17,500.00€
Προσθήκη στο καλάθι

BRYSTON 28B³

BRYSTON 28B³

BRYSTON 28B³

METRONOME AQWO
Add to compare
Quick view
Add to wishlist

METRONOME AQWO

, ,
17,560.00€
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

METRONOME AQWO

METRONOME AQWO

METRONOME AQWO

JADIS DA88S
Add to compare
Quick view
Add to wishlist

JADIS DA88S

,
Price range: 17,890.00€ through 18,430.00€
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

JADIS DA88S

JADIS DA88S

JADIS DA88S

JADIS JPS2 preamplifier
Add to compare
Quick view
Add to wishlist

JADIS JPS2 preamplifier

,
17,990.00€
Προσθήκη στο καλάθι

JADIS JPS2 preamplifier

JADIS JPS2 preamplifier

JADIS JPS2 preamplifier