Show sidebar
Show 24 48 64
Filters
LUDIC Wooden Brush Vinyl Goat. Made from wood and natural goat hair, this anti-static brush is ideal for removing dust and other debris that can settle in the grooves of a vinyl record. Naturally anti-static bristles prevent static build-up. Wooden handle.
Add to compare
Quick view
Add to wishlist

LUDIC Wooden Brush Vinyl Goat

18.00€
Προσθήκη στο καλάθι
LUDIC Wooden Brush Vinyl Goat   LUDIC Ξύλινη βούρτσα βινυλίου κατσίκας. Κατασκευασμένο από ξύλο και φυσικό τρίχωμα κατσίκας, Αυτή η
LUDIC turntable mat διπλής όψης LUDIC Double sided Genuine Leather & Cork The Double side Leather & Cork Mat is a premium mat made from Genuine leather and cork. This will give the best acoustic feedback when playing records which is one of the major problems when playing records. The cause is the sound that has just been produced by the speakers which comes back to the record player and cause it to vibrate. The problems is that there is a very slight time difference between the reproduced sound and the sound that is fed back onto the record player. This results in a big loss of detail and clarity and makes the sound “muddy”. So every effort has to be done to isolate the record player from its surroundings as well as to isolate the record from the record player. With the goal to reduce acoustic feedback from the surroundings back to the record and the cartridge a lot of effort has gone into developing turntable mats that make the reproduced sound crystal clear with great separation and detail. There are different materials to achieve this, the leather&cork mat is one of the best options and still for a very good price.
Add to compare
Quick view
Add to wishlist

LUDIC turntable mat διπλής όψης

55.00€
Προσθήκη στο καλάθι
LUDIC turntable mat διπλής όψης   LUDIC turntable mat από γνήσιο δέρμα & φελλό διπλής όψεως Το Double side Leather
LUDIC Baerwald Protractor Our Ludic Baerwald Alignment protractor allows you to check your cartridge is correctly aligned in your tonearm. An incorrectly aligned phono cartridge can result in premature cartridge and record wear. Despite what some manufacturers claim, correct overhang length and alignment is critical to obtaining proper audio reproduction without distortion and avoiding unnecessary record and stylus wear. This is a precision task and cannot be done by eye or guess work alone. You will only be able to enjoy the best possible sound from your cartridge when properly aligned. The mirrored surface makes all measurements easier and more accurate. The mirror’s parallax effect allows the elimination of sighting errors, and provides better lighting, critical in making fine adjustments on small parts. Simply place this alignment gauge over your turntable spindle, move your phono cartridge over the grid, and make sure it is correctly aligned before tightening it to your tonearm. Couldn’t be simpler.
Add to compare
Quick view
Add to wishlist

LUDIC Baerwald Protractor

15.00€
Προσθήκη στο καλάθι
LUDIC Baerwald Protractor Ο protractor της Ludic Baerwald Alignment σάς επιτρέπει να ελέγχετε την σωστή τοποθέτησης της κεφαλής σας πάνω
LUDIC Aesir Optilink LUDIC AESIR high performance OptiLink cable Optical digital audio connection send superior audio signals between devices. Most optical cables you buy uses plastic fibers and that works well in relatively short distances, also a lot optical cables are poorly designed, but we designed a quality cable for a great price! LUDIC use Glass and yes this costs substantially more and is generally used in professional applications, and with great latching connectors the light troughput is stronger and gives no connection problems or signal loss. LUDIC AESIR Toslink cables are utilized to carry digital audio signals between devices, suitable for LCD TV’s, gaming consoles, audio equipment, PC’s. our line of cables are always a good choice for your audio system.
Add to compare
Quick view
Add to wishlist

LUDIC Aesir Optilink

,
Price range: 49.00€ through 59.00€
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

LUDIC Aesir Optilink

LUDIC Aesir OptilinkLUDIC AESIR high performance OptiLink cable Optical digital audio connection send superior audio signals between devices. Most optical cables you buy uses plastic fibers and that works well in relatively short distances, also a lot optical cables are poorly designed, but we designed a quality cable for a great price! LUDIC use Glass and yes this costs substantially more and is generally used in professional applications, and with great latching connectors the light troughput is stronger and gives no connection problems or signal loss. LUDIC AESIR Toslink cables are utilized to carry digital audio signals between devices, suitable for LCD TV’s, gaming consoles, audio equipment, PC’s. our line of cables are always a good choice for your audio system.

LUDIC Aesir Optilink

Dual DTJ 301.1 Professional device with USB function! Enjoy your old record collection in the highest quality and enjoy your memories. The Dual DTJ 301 doesn’t just play your new and old records in the usual quality, but also offers you other functions, such as the USB function for digitizing your old records or the possibility of scratching your records. The direct drive enables the target speed to be reached quickly (33/45 revolutions per minute) with a start / stop time of
Add to compare
Quick view
Add to wishlist

Dual DTJ 301.1

360.00€
Προσθήκη στο καλάθι

Dual DTJ 301.1

Dual DTJ 301.1Professional device with USB function! Enjoy your old record collection in the highest quality and enjoy your memories. The Dual DTJ 301 doesn’t just play your new and old records in the usual quality, but also offers you other functions, such as the USB function for digitizing your old records or the possibility of scratching your records. The direct drive enables the target speed to be reached quickly (33/45 revolutions per minute) with a start / stop time of <1 second. You can connect the turntable to your amplifier or your computer (via USB cable) using an audio cable. The device also has a cast aluminum platter with an antistatic felt mat, a magnetic pickup system and integrated needle lighting.

Dual DTJ 301.1

Audio Note ANE-SPE-HE Details The majority of the high-end audio marketplace is occupied by ill-conceived low efficiency loudspeaker systems. These designs usually consist of several less-than-ideally matched drivers and a very complex crossover, crammed into a cabinet that exhibits the tonal and textural qualities of reinforced concrete. Their designers are blinded by the dogmatic quest for high sound pressure levels and flat response. But what of the other factors which are essential for emotionally involving music reproduction? What about coherence, full natural micro—as well as macro—dynamics, inner detail? What about LIFE? What about EMOTION? Sorry, they’re just not part of the “High Performance Audio” design brief. And Music suffers for it. The design of the AN-E Loudspeaker, by contrast, follows an altogether different philosophy. It calls for a cabinet that complements the chosen drive units, rather than fighting against them. Instead of trying to kill the resonances, we tailor the cabinet to place them in frequency bands where they aid and enhance the operation of the drive units, culminating in a loudspeaker system that makes the most of the preceding amplifier’s output. The material choice for the cabinet is an area where a great deal of research and development has taken place. Over the years, we have tried many different materials and combinations, a time consuming endeavour culminating in the current design, which utlises the highest quality birch ply for the entire cabinet. Bracing and internal damping is kept to a minimum and strategically applied to help, not hinder the drivers. The ported cabinet has been designed to be placed close to room boundaries, where the bass performance is augmented significantly by the additional reinforcement offered by the nearby walls. In this position, it will outperform any similarly sized speaker regardless of origin, thanks in part to the shallow cabinet / wide baffle shape which gives the drivers the best possible operating conditions, allowing them to perform as if they are mounted in a virtual wall. This provides the most undisturbed sound field with the widest and most even dispersion possible from a real world cabinet shape. The crossover is simple, essentially first order, hardwired and incorporates air-cored chokes and selected bipolar and polypropylene capacitors (either copper foil or silver foil, depending on model). The internal cabling consists of either 99.99% pure copper or 99.99% pure silver Audio Note (UK) wire, depending on the exact model. (See specifications.) Consistent performance is a major issue in loudspeaker design and unfortunately all drive units vary slightly from each other, even if they look the same and have the same basic specification. Many loudspeaker manufacturer’s will tell you that they provide “computer matched” crossovers, and whilst this may be true in one sense (each crossover may have been matched to have the exact same capacitance, inductance and resistance) this essentially “passive” method does not adequately take into consideration the mechanical and acoustic variance present in the drive units themselves, where minute differences in acoustic behaviour will result in quite substantial differences in performance and sound. Therefore, to obtain the best possible combination of drivers and crossovers, we have developed a dynamic matching process. This ensures that each loudspeaker in a stereo pair matches a "master curve" and also its partner, to within 0.4dB. To the best of our knowledge, no other loudspeaker manufacturer achieves such close matching and tests 100% of its production. Another much overlooked area of loudspeaker design is the material choice for the drivers. It has become very fashionable to use all manner of exotic materials (beryllium, diamond, carbon fibre, ceramics etc.) as cone materials in modern drivers, mainly because it gives the impression that the manufacturer in question is making great strides in their research into better sounding speakers. The sad fact is none of these materials work as intended, as they all have their own distinct sonic signature, so no matter how the crossover is designed, this sonic signature will be present when the speaker reproduces music. It may be less obvious and audible with some types of music, but ultimately the chosen material will always imprint some of its own signature on whatever sound is reproduced. In addition, it is vitally important that the sound and characteristics of an individual drive unit are complimentary to those of its chosen partner, so that when an instrument is reproduced by both drive units (which is almost always the case), the upper range does not sound detached from the lower range and visa versa. This is an aspect of performance that cannot be measured by even the most sophisticated test equipment; it can ONLY be judged by listening. We at Audio Note are keenly aware of this and have deliberately chosen drive units whose sonic signatures are as closely matched as possible. This has led us to favour good, old fashioned paper and Hemp paper for the woofer cone and impregnated silk for the dome tweeter. These materials, when matched correctly, marry the low and high frequencies seamlessly, providing the best level of performance possible in the real world of acoustics.
Add to compare
Quick view
Add to wishlist

Audio Note ANE-SPE-HE

,
12,450.00€
Προσθήκη στο καλάθι

Audio Note ANE-SPE-HE

Audio Note ANE-SPE-HE Details The majority of the high-end audio marketplace is occupied by ill-conceived low efficiency loudspeaker systems. These designs usually consist of several less-than-ideally matched drivers and a very complex crossover, crammed into a cabinet that exhibits the tonal and textural qualities of reinforced concrete. Their designers are blinded by the dogmatic quest for high sound pressure levels and flat response. But what of the other factors which are essential for emotionally involving music reproduction? What about coherence, full natural micro—as well as macro—dynamics, inner detail? What about LIFE? What about EMOTION? Sorry, they’re just not part of the “High Performance Audio” design brief. And Music suffers for it. The design of the AN-E Loudspeaker, by contrast, follows an altogether different philosophy. It calls for a cabinet that complements the chosen drive units, rather than fighting against them. Instead of trying to kill the resonances, we tailor the cabinet to place them in frequency bands where they aid and enhance the operation of the drive units, culminating in a loudspeaker system that makes the most of the preceding amplifier’s output. The material choice for the cabinet is an area where a great deal of research and development has taken place. Over the years, we have tried many different materials and combinations, a time consuming endeavour culminating in the current design, which utlises the highest quality birch ply for the entire cabinet. Bracing and internal damping is kept to a minimum and strategically applied to help, not hinder the drivers. The ported cabinet has been designed to be placed close to room boundaries, where the bass performance is augmented significantly by the additional reinforcement offered by the nearby walls. In this position, it will outperform any similarly sized speaker regardless of origin, thanks in part to the shallow cabinet / wide baffle shape which gives the drivers the best possible operating conditions, allowing them to perform as if they are mounted in a virtual wall. This provides the most undisturbed sound field with the widest and most even dispersion possible from a real world cabinet shape. The crossover is simple, essentially first order, hardwired and incorporates air-cored chokes and selected bipolar and polypropylene capacitors (either copper foil or silver foil, depending on model). The internal cabling consists of either 99.99% pure copper or 99.99% pure silver Audio Note (UK) wire, depending on the exact model. (See specifications.) Consistent performance is a major issue in loudspeaker design and unfortunately all drive units vary slightly from each other, even if they look the same and have the same basic specification. Many loudspeaker manufacturer’s will tell you that they provide “computer matched” crossovers, and whilst this may be true in one sense (each crossover may have been matched to have the exact same capacitance, inductance and resistance) this essentially “passive” method does not adequately take into consideration the mechanical and acoustic variance present in the drive units themselves, where minute differences in acoustic behaviour will result in quite substantial differences in performance and sound. Therefore, to obtain the best possible combination of drivers and crossovers, we have developed a dynamic matching process. This ensures that each loudspeaker in a stereo pair matches a "master curve" and also its partner, to within 0.4dB. To the best of our knowledge, no other loudspeaker manufacturer achieves such close matching and tests 100% of its production. Another much overlooked area of loudspeaker design is the material choice for the drivers. It has become very fashionable to use all manner of exotic materials (beryllium, diamond, carbon fibre, ceramics etc.) as cone materials in modern drivers, mainly because it gives the impression that the manufacturer in question is making great strides in their research into better sounding speakers. The sad fact is none of these materials work as intended, as they all have their own distinct sonic signature, so no matter how the crossover is designed, this sonic signature will be present when the speaker reproduces music. It may be less obvious and audible with some types of music, but ultimately the chosen material will always imprint some of its own signature on whatever sound is reproduced. In addition, it is vitally important that the sound and characteristics of an individual drive unit are complimentary to those of its chosen partner, so that when an instrument is reproduced by both drive units (which is almost always the case), the upper range does not sound detached from the lower range and visa versa. This is an aspect of performance that cannot be measured by even the most sophisticated test equipment; it can ONLY be judged by listening. We at Audio Note are keenly aware of this and have deliberately chosen drive units whose sonic signatures are as closely matched as possible. This has led us to favour good, old fashioned paper and Hemp paper for the woofer cone and impregnated silk for the dome tweeter. These materials, when matched correctly, marry the low and high frequencies seamlessly, providing the best level of performance possible in the real world of acoustics.

Audio Note ANE-SPE-HE

Audio Note ANE LX Hemp Details The majority of the high-end audio marketplace is occupied by ill-conceived low efficiency loudspeaker systems. These designs usually consist of several less-than-ideally matched drivers and a very complex crossover, crammed into a cabinet that exhibits the tonal and textural qualities of reinforced concrete. Their designers are blinded by the dogmatic quest for high sound pressure levels and flat response. But what of the other factors which are essential for emotionally involving music reproduction? What about coherence, full natural micro—as well as macro—dynamics, inner detail? What about LIFE? What about EMOTION? Sorry, they’re just not part of the “High Performance Audio” design brief. And Music suffers for it. The design of the AN-E Loudspeaker, by contrast, follows an altogether different philosophy. It calls for a cabinet that complements the chosen drive units, rather than fighting against them. Instead of trying to kill the resonances, we tailor the cabinet to place them in frequency bands where they aid and enhance the operation of the drive units, culminating in a loudspeaker system that makes the most of the preceding amplifier’s output. The material choice for the cabinet is an area where a great deal of research and development has taken place. Over the years, we have tried many different materials and combinations, a time consuming endeavour culminating in the current design, which utlises the highest quality birch ply for the entire cabinet. Bracing and internal damping is kept to a minimum and strategically applied to help, not hinder the drivers. The ported cabinet has been designed to be placed close to room boundaries, where the bass performance is augmented significantly by the additional reinforcement offered by the nearby walls. In this position, it will outperform any similarly sized speaker regardless of origin, thanks in part to the shallow cabinet / wide baffle shape which gives the drivers the best possible operating conditions, allowing them to perform as if they are mounted in a virtual wall. This provides the most undisturbed sound field with the widest and most even dispersion possible from a real world cabinet shape. The crossover is simple, essentially first order, hardwired and incorporates air-cored chokes and selected bipolar and polypropylene capacitors (either copper foil or silver foil, depending on model). The internal cabling consists of either 99.99% pure copper or 99.99% pure silver Audio Note (UK) wire, depending on the exact model. (See specifications.) Consistent performance is a major issue in loudspeaker design and unfortunately all drive units vary slightly from each other, even if they look the same and have the same basic specification. Many loudspeaker manufacturer’s will tell you that they provide “computer matched” crossovers, and whilst this may be true in one sense (each crossover may have been matched to have the exact same capacitance, inductance and resistance) this essentially “passive” method does not adequately take into consideration the mechanical and acoustic variance present in the drive units themselves, where minute differences in acoustic behaviour will result in quite substantial differences in performance and sound. Therefore, to obtain the best possible combination of drivers and crossovers, we have developed a dynamic matching process. This ensures that each loudspeaker in a stereo pair matches a "master curve" and also its partner, to within 0.4dB. To the best of our knowledge, no other loudspeaker manufacturer achieves such close matching and tests 100% of its production. Another much overlooked area of loudspeaker design is the material choice for the drivers. It has become very fashionable to use all manner of exotic materials (beryllium, diamond, carbon fibre, ceramics etc.) as cone materials in modern drivers, mainly because it gives the impression that the manufacturer in question is making great strides in their research into better sounding speakers. The sad fact is none of these materials work as intended, as they all have their own distinct sonic signature, so no matter how the crossover is designed, this sonic signature will be present when the speaker reproduces music. It may be less obvious and audible with some types of music, but ultimately the chosen material will always imprint some of its own signature on whatever sound is reproduced. In addition, it is vitally important that the sound and characteristics of an individual drive unit are complimentary to those of its chosen partner, so that when an instrument is reproduced by both drive units (which is almost always the case), the upper range does not sound detached from the lower range and visa versa. This is an aspect of performance that cannot be measured by even the most sophisticated test equipment; it can ONLY be judged by listening. We at Audio Note are keenly aware of this and have deliberately chosen drive units whose sonic signatures are as closely matched as possible. This has led us to favour good, old fashioned paper and Hemp paper for the woofer cone and impregnated silk for the dome tweeter. These materials, when matched correctly, marry the low and high frequencies seamlessly, providing the best level of performance possible in the real world of acoustics.
Add to compare
Quick view
Add to wishlist

Audio Note ANE LX Hemp

,
9,950.00€
Προσθήκη στο καλάθι

Audio Note ANE LX Hemp

Audio Note ANE LX HempDetails The majority of the high-end audio marketplace is occupied by ill-conceived low efficiency loudspeaker systems. These designs usually consist of several less-than-ideally matched drivers and a very complex crossover, crammed into a cabinet that exhibits the tonal and textural qualities of reinforced concrete. Their designers are blinded by the dogmatic quest for high sound pressure levels and flat response. But what of the other factors which are essential for emotionally involving music reproduction? What about coherence, full natural micro—as well as macro—dynamics, inner detail? What about LIFE? What about EMOTION? Sorry, they’re just not part of the “High Performance Audio” design brief. And Music suffers for it. The design of the AN-E Loudspeaker, by contrast, follows an altogether different philosophy. It calls for a cabinet that complements the chosen drive units, rather than fighting against them. Instead of trying to kill the resonances, we tailor the cabinet to place them in frequency bands where they aid and enhance the operation of the drive units, culminating in a loudspeaker system that makes the most of the preceding amplifier’s output. The material choice for the cabinet is an area where a great deal of research and development has taken place. Over the years, we have tried many different materials and combinations, a time consuming endeavour culminating in the current design, which utlises the highest quality birch ply for the entire cabinet. Bracing and internal damping is kept to a minimum and strategically applied to help, not hinder the drivers. The ported cabinet has been designed to be placed close to room boundaries, where the bass performance is augmented significantly by the additional reinforcement offered by the nearby walls. In this position, it will outperform any similarly sized speaker regardless of origin, thanks in part to the shallow cabinet / wide baffle shape which gives the drivers the best possible operating conditions, allowing them to perform as if they are mounted in a virtual wall. This provides the most undisturbed sound field with the widest and most even dispersion possible from a real world cabinet shape. The crossover is simple, essentially first order, hardwired and incorporates air-cored chokes and selected bipolar and polypropylene capacitors (either copper foil or silver foil, depending on model). The internal cabling consists of either 99.99% pure copper or 99.99% pure silver Audio Note (UK) wire, depending on the exact model. (See specifications.) Consistent performance is a major issue in loudspeaker design and unfortunately all drive units vary slightly from each other, even if they look the same and have the same basic specification. Many loudspeaker manufacturer’s will tell you that they provide “computer matched” crossovers, and whilst this may be true in one sense (each crossover may have been matched to have the exact same capacitance, inductance and resistance) this essentially “passive” method does not adequately take into consideration the mechanical and acoustic variance present in the drive units themselves, where minute differences in acoustic behaviour will result in quite substantial differences in performance and sound. Therefore, to obtain the best possible combination of drivers and crossovers, we have developed a dynamic matching process. This ensures that each loudspeaker in a stereo pair matches a "master curve" and also its partner, to within 0.4dB. To the best of our knowledge, no other loudspeaker manufacturer achieves such close matching and tests 100% of its production. Another much overlooked area of loudspeaker design is the material choice for the drivers. It has become very fashionable to use all manner of exotic materials (beryllium, diamond, carbon fibre, ceramics etc.) as cone materials in modern drivers, mainly because it gives the impression that the manufacturer in question is making great strides in their research into better sounding speakers. The sad fact is none of these materials work as intended, as they all have their own distinct sonic signature, so no matter how the crossover is designed, this sonic signature will be present when the speaker reproduces music. It may be less obvious and audible with some types of music, but ultimately the chosen material will always imprint some of its own signature on whatever sound is reproduced. In addition, it is vitally important that the sound and characteristics of an individual drive unit are complimentary to those of its chosen partner, so that when an instrument is reproduced by both drive units (which is almost always the case), the upper range does not sound detached from the lower range and visa versa. This is an aspect of performance that cannot be measured by even the most sophisticated test equipment; it can ONLY be judged by listening. We at Audio Note are keenly aware of this and have deliberately chosen drive units whose sonic signatures are as closely matched as possible. This has led us to favour good, old fashioned paper and Hemp paper for the woofer cone and impregnated silk for the dome tweeter. These materials, when matched correctly, marry the low and high frequencies seamlessly, providing the best level of performance possible in the real world of acoustics.

Audio Note ANE LX Hemp

Audio Note ANE LX Details The majority of the high-end audio marketplace is occupied by ill-conceived low efficiency loudspeaker systems. These designs usually consist of several less-than-ideally matched drivers and a very complex crossover, crammed into a cabinet that exhibits the tonal and textural qualities of reinforced concrete. Their designers are blinded by the dogmatic quest for high sound pressure levels and flat response. But what of the other factors which are essential for emotionally involving music reproduction? What about coherence, full natural micro—as well as macro—dynamics, inner detail? What about LIFE? What about EMOTION? Sorry, they’re just not part of the “High Performance Audio” design brief. And Music suffers for it. The design of the AN-E Loudspeaker, by contrast, follows an altogether different philosophy. It calls for a cabinet that complements the chosen drive units, rather than fighting against them. Instead of trying to kill the resonances, we tailor the cabinet to place them in frequency bands where they aid and enhance the operation of the drive units, culminating in a loudspeaker system that makes the most of the preceding amplifier’s output. The material choice for the cabinet is an area where a great deal of research and development has taken place. Over the years, we have tried many different materials and combinations, a time consuming endeavour culminating in the current design, which utlises the highest quality birch ply for the entire cabinet. Bracing and internal damping is kept to a minimum and strategically applied to help, not hinder the drivers. The ported cabinet has been designed to be placed close to room boundaries, where the bass performance is augmented significantly by the additional reinforcement offered by the nearby walls. In this position, it will outperform any similarly sized speaker regardless of origin, thanks in part to the shallow cabinet / wide baffle shape which gives the drivers the best possible operating conditions, allowing them to perform as if they are mounted in a virtual wall. This provides the most undisturbed sound field with the widest and most even dispersion possible from a real world cabinet shape. The crossover is simple, essentially first order, hardwired and incorporates air-cored chokes and selected bipolar and polypropylene capacitors (either copper foil or silver foil, depending on model). The internal cabling consists of either 99.99% pure copper or 99.99% pure silver Audio Note (UK) wire, depending on the exact model. (See specifications.) Consistent performance is a major issue in loudspeaker design and unfortunately all drive units vary slightly from each other, even if they look the same and have the same basic specification. Many loudspeaker manufacturer’s will tell you that they provide “computer matched” crossovers, and whilst this may be true in one sense (each crossover may have been matched to have the exact same capacitance, inductance and resistance) this essentially “passive” method does not adequately take into consideration the mechanical and acoustic variance present in the drive units themselves, where minute differences in acoustic behaviour will result in quite substantial differences in performance and sound. Therefore, to obtain the best possible combination of drivers and crossovers, we have developed a dynamic matching process. This ensures that each loudspeaker in a stereo pair matches a "master curve" and also its partner, to within 0.4dB. To the best of our knowledge, no other loudspeaker manufacturer achieves such close matching and tests 100% of its production. Another much overlooked area of loudspeaker design is the material choice for the drivers. It has become very fashionable to use all manner of exotic materials (beryllium, diamond, carbon fibre, ceramics etc.) as cone materials in modern drivers, mainly because it gives the impression that the manufacturer in question is making great strides in their research into better sounding speakers. The sad fact is none of these materials work as intended, as they all have their own distinct sonic signature, so no matter how the crossover is designed, this sonic signature will be present when the speaker reproduces music. It may be less obvious and audible with some types of music, but ultimately the chosen material will always imprint some of its own signature on whatever sound is reproduced. In addition, it is vitally important that the sound and characteristics of an individual drive unit are complimentary to those of its chosen partner, so that when an instrument is reproduced by both drive units (which is almost always the case), the upper range does not sound detached from the lower range and visa versa. This is an aspect of performance that cannot be measured by even the most sophisticated test equipment; it can ONLY be judged by listening. We at Audio Note are keenly aware of this and have deliberately chosen drive units whose sonic signatures are as closely matched as possible. This has led us to favour good, old fashioned paper and Hemp paper for the woofer cone and impregnated silk for the dome tweeter. These materials, when matched correctly, marry the low and high frequencies seamlessly, providing the best level of performance possible in the real world of acoustics.
Add to compare
Quick view
Add to wishlist

Audio Note ANE LX

,
9,440.00€
Προσθήκη στο καλάθι

Audio Note ANE LX

Audio Note ANE LXDetails The majority of the high-end audio marketplace is occupied by ill-conceived low efficiency loudspeaker systems. These designs usually consist of several less-than-ideally matched drivers and a very complex crossover, crammed into a cabinet that exhibits the tonal and textural qualities of reinforced concrete. Their designers are blinded by the dogmatic quest for high sound pressure levels and flat response. But what of the other factors which are essential for emotionally involving music reproduction? What about coherence, full natural micro—as well as macro—dynamics, inner detail? What about LIFE? What about EMOTION? Sorry, they’re just not part of the “High Performance Audio” design brief. And Music suffers for it. The design of the AN-E Loudspeaker, by contrast, follows an altogether different philosophy. It calls for a cabinet that complements the chosen drive units, rather than fighting against them. Instead of trying to kill the resonances, we tailor the cabinet to place them in frequency bands where they aid and enhance the operation of the drive units, culminating in a loudspeaker system that makes the most of the preceding amplifier’s output. The material choice for the cabinet is an area where a great deal of research and development has taken place. Over the years, we have tried many different materials and combinations, a time consuming endeavour culminating in the current design, which utlises the highest quality birch ply for the entire cabinet. Bracing and internal damping is kept to a minimum and strategically applied to help, not hinder the drivers. The ported cabinet has been designed to be placed close to room boundaries, where the bass performance is augmented significantly by the additional reinforcement offered by the nearby walls. In this position, it will outperform any similarly sized speaker regardless of origin, thanks in part to the shallow cabinet / wide baffle shape which gives the drivers the best possible operating conditions, allowing them to perform as if they are mounted in a virtual wall. This provides the most undisturbed sound field with the widest and most even dispersion possible from a real world cabinet shape. The crossover is simple, essentially first order, hardwired and incorporates air-cored chokes and selected bipolar and polypropylene capacitors (either copper foil or silver foil, depending on model). The internal cabling consists of either 99.99% pure copper or 99.99% pure silver Audio Note (UK) wire, depending on the exact model. (See specifications.) Consistent performance is a major issue in loudspeaker design and unfortunately all drive units vary slightly from each other, even if they look the same and have the same basic specification. Many loudspeaker manufacturer’s will tell you that they provide “computer matched” crossovers, and whilst this may be true in one sense (each crossover may have been matched to have the exact same capacitance, inductance and resistance) this essentially “passive” method does not adequately take into consideration the mechanical and acoustic variance present in the drive units themselves, where minute differences in acoustic behaviour will result in quite substantial differences in performance and sound. Therefore, to obtain the best possible combination of drivers and crossovers, we have developed a dynamic matching process. This ensures that each loudspeaker in a stereo pair matches a "master curve" and also its partner, to within 0.4dB. To the best of our knowledge, no other loudspeaker manufacturer achieves such close matching and tests 100% of its production. Another much overlooked area of loudspeaker design is the material choice for the drivers. It has become very fashionable to use all manner of exotic materials (beryllium, diamond, carbon fibre, ceramics etc.) as cone materials in modern drivers, mainly because it gives the impression that the manufacturer in question is making great strides in their research into better sounding speakers. The sad fact is none of these materials work as intended, as they all have their own distinct sonic signature, so no matter how the crossover is designed, this sonic signature will be present when the speaker reproduces music. It may be less obvious and audible with some types of music, but ultimately the chosen material will always imprint some of its own signature on whatever sound is reproduced. In addition, it is vitally important that the sound and characteristics of an individual drive unit are complimentary to those of its chosen partner, so that when an instrument is reproduced by both drive units (which is almost always the case), the upper range does not sound detached from the lower range and visa versa. This is an aspect of performance that cannot be measured by even the most sophisticated test equipment; it can ONLY be judged by listening. We at Audio Note are keenly aware of this and have deliberately chosen drive units whose sonic signatures are as closely matched as possible. This has led us to favour good, old fashioned paper and Hemp paper for the woofer cone and impregnated silk for the dome tweeter. These materials, when matched correctly, marry the low and high frequencies seamlessly, providing the best level of performance possible in the real world of acoustics.

Audio Note ANE LX

Audio Note AN-J-LX Hemp Details The majority of the high-end audio marketplace is occupied by ill-conceived low efficiency loudspeaker systems. These designs usually consist of several less-than-ideally matched drivers and a very complex crossover, crammed into a cabinet that exhibits the tonal and textural qualities of reinforced concrete. Their designers are blinded by the dogmatic quest for high sound pressure levels and flat response. But what of the other factors which are essential for emotionally involving music reproduction? What about coherence, full natural micro—as well as macro—dynamics, inner detail? What about LIFE? What about EMOTION? Sorry, they’re just not part of the “High Performance Audio” design brief. And music suffers for it. The design of the AN-J Loudspeaker, by contrast, follows an altogether different philosophy. It calls for a cabinet that complements the chosen drive units, rather than fighting against them. Instead of trying to kill the resonances, we tailor the cabinet to place them in frequency bands where they aid and enhance the operation of the drive units, culminating in a loudspeaker system that makes the most of the preceding amplifier’s output. The material choice for the cabinet is an area where a great deal of research and development has taken place. Over the years, we have tried many different materials and combinations, a time consuming endeavour culminating in the current design, which utilises the highest quality birch ply for the entire cabinet. Bracing and internal damping is kept to a minimum and strategically applied to help, not hinder the drivers. The ported cabinet has been designed to be placed close to room boundaries, where the bass performance is augmented significantly by the additional reinforcement offered by the nearby walls. In this position, it will outperform any similarly sized speaker regardless of origin, thanks in part to the shallow cabinet / wide baffle shape which gives the drivers the best possible operating conditions, allowing them to perform as if they are mounted in a virtual wall. This provides the most undisturbed sound field with the widest and most even dispersion possible from a real world cabinet shape. The crossover is simple, essentially first order, hardwired and incorporates air-cored chokes and selected bipolar and polypropylene capacitors (either copper foil or silver foil, depending on model). The internal cabling consists of either 99.99% pure copper or 99.99% pure silver Audio Note (UK) wire, depending on the exact model. (See specifications.) Consistent performance is a major issue in loudspeaker design and unfortunately all drive units vary slightly from each other, even if they look the same and have the same basic specification. Many loudspeaker manufacturer’s will tell you that they provide “computer matched” crossovers, and whilst this may be true in one sense (each crossover may have been matched to have the exact same capacitance, inductance and resistance) this essentially “passive” method does not adequately take into consideration the mechanical and acoustic variance present in the drive units themselves, where minute differences in acoustic behaviour will result in quite substantial differences in performance and sound. Therefore, to obtain the best possible combination of drivers and crossovers, we have developed a dynamic matching process. This ensures that each loudspeaker in a stereo pair matches a "master curve" and also its partner, to within 0.4dB. To the best of our knowledge, no other loudspeaker manufacturer achieves such close matching and tests 100% of its production. Another much overlooked area of loudspeaker design is the material choice for the drivers. It has become very fashionable to use all manner of exotic materials (beryllium, diamond, carbon fibre, ceramics etc.) as cone materials in modern drivers, mainly because it gives the impression that the manufacturer in question is making great strides in their research into better sounding speakers. The sad fact is none of these materials work as intended, as they all have their own distinct sonic signature, so no matter how the crossover is designed, this sonic signature will be present when the speaker reproduces music. It may be less obvious and audible with some types of music, but ultimately the chosen material will always imprint some of its own signature on whatever sound is reproduced. In addition, it is vitally important that the sound and characteristics of an individual drive unit are complimentary to those of its chosen partner, so that when an instrument is reproduced by both drive units (which is almost always the case), the upper range does not sound detached from the lower range and vice versa. This is an aspect of performance that cannot be measured by even the most sophisticated test equipment; it can ONLY be judged by listening. We at Audio Note are keenly aware of this and have deliberately chosen drive units whose sonic signatures are as closely matched as possible. This has led us to favour good, old fashioned paper and Hemp paper for the woofer cone and impregnated silk for the dome tweeter. These materials, when matched correctly, marry the low and high frequencies seamlessly, providing the best level of performance possible in the real world of acoustics.
Add to compare
Quick view
Add to wishlist

Audio Note AN-J-LX Hemp

,
7,270.00€
Προσθήκη στο καλάθι

Audio Note AN-J-LX Hemp

Audio Note AN-J-LX HempDetails The majority of the high-end audio marketplace is occupied by ill-conceived low efficiency loudspeaker systems. These designs usually consist of several less-than-ideally matched drivers and a very complex crossover, crammed into a cabinet that exhibits the tonal and textural qualities of reinforced concrete. Their designers are blinded by the dogmatic quest for high sound pressure levels and flat response. But what of the other factors which are essential for emotionally involving music reproduction? What about coherence, full natural micro—as well as macro—dynamics, inner detail? What about LIFE? What about EMOTION? Sorry, they’re just not part of the “High Performance Audio” design brief. And music suffers for it. The design of the AN-J Loudspeaker, by contrast, follows an altogether different philosophy. It calls for a cabinet that complements the chosen drive units, rather than fighting against them. Instead of trying to kill the resonances, we tailor the cabinet to place them in frequency bands where they aid and enhance the operation of the drive units, culminating in a loudspeaker system that makes the most of the preceding amplifier’s output. The material choice for the cabinet is an area where a great deal of research and development has taken place. Over the years, we have tried many different materials and combinations, a time consuming endeavour culminating in the current design, which utilises the highest quality birch ply for the entire cabinet. Bracing and internal damping is kept to a minimum and strategically applied to help, not hinder the drivers. The ported cabinet has been designed to be placed close to room boundaries, where the bass performance is augmented significantly by the additional reinforcement offered by the nearby walls. In this position, it will outperform any similarly sized speaker regardless of origin, thanks in part to the shallow cabinet / wide baffle shape which gives the drivers the best possible operating conditions, allowing them to perform as if they are mounted in a virtual wall. This provides the most undisturbed sound field with the widest and most even dispersion possible from a real world cabinet shape. The crossover is simple, essentially first order, hardwired and incorporates air-cored chokes and selected bipolar and polypropylene capacitors (either copper foil or silver foil, depending on model). The internal cabling consists of either 99.99% pure copper or 99.99% pure silver Audio Note (UK) wire, depending on the exact model. (See specifications.) Consistent performance is a major issue in loudspeaker design and unfortunately all drive units vary slightly from each other, even if they look the same and have the same basic specification. Many loudspeaker manufacturer’s will tell you that they provide “computer matched” crossovers, and whilst this may be true in one sense (each crossover may have been matched to have the exact same capacitance, inductance and resistance) this essentially “passive” method does not adequately take into consideration the mechanical and acoustic variance present in the drive units themselves, where minute differences in acoustic behaviour will result in quite substantial differences in performance and sound. Therefore, to obtain the best possible combination of drivers and crossovers, we have developed a dynamic matching process. This ensures that each loudspeaker in a stereo pair matches a "master curve" and also its partner, to within 0.4dB. To the best of our knowledge, no other loudspeaker manufacturer achieves such close matching and tests 100% of its production. Another much overlooked area of loudspeaker design is the material choice for the drivers. It has become very fashionable to use all manner of exotic materials (beryllium, diamond, carbon fibre, ceramics etc.) as cone materials in modern drivers, mainly because it gives the impression that the manufacturer in question is making great strides in their research into better sounding speakers. The sad fact is none of these materials work as intended, as they all have their own distinct sonic signature, so no matter how the crossover is designed, this sonic signature will be present when the speaker reproduces music. It may be less obvious and audible with some types of music, but ultimately the chosen material will always imprint some of its own signature on whatever sound is reproduced. In addition, it is vitally important that the sound and characteristics of an individual drive unit are complimentary to those of its chosen partner, so that when an instrument is reproduced by both drive units (which is almost always the case), the upper range does not sound detached from the lower range and vice versa. This is an aspect of performance that cannot be measured by even the most sophisticated test equipment; it can ONLY be judged by listening. We at Audio Note are keenly aware of this and have deliberately chosen drive units whose sonic signatures are as closely matched as possible. This has led us to favour good, old fashioned paper and Hemp paper for the woofer cone and impregnated silk for the dome tweeter. These materials, when matched correctly, marry the low and high frequencies seamlessly, providing the best level of performance possible in the real world of acoustics.

Audio Note AN-J-LX Hemp

Audio Note AN-J-LX Details The majority of the high-end audio marketplace is occupied by ill-conceived low efficiency loudspeaker systems. These designs usually consist of several less-than-ideally matched drivers and a very complex crossover, crammed into a cabinet that exhibits the tonal and textural qualities of reinforced concrete. Their designers are blinded by the dogmatic quest for high sound pressure levels and flat response. But what of the other factors which are essential for emotionally involving music reproduction? What about coherence, full natural micro—as well as macro—dynamics, inner detail? What about LIFE? What about EMOTION? Sorry, they’re just not part of the “High Performance Audio” design brief. And music suffers for it. The design of the AN-J Loudspeaker, by contrast, follows an altogether different philosophy. It calls for a cabinet that complements the chosen drive units, rather than fighting against them. Instead of trying to kill the resonances, we tailor the cabinet to place them in frequency bands where they aid and enhance the operation of the drive units, culminating in a loudspeaker system that makes the most of the preceding amplifier’s output. The material choice for the cabinet is an area where a great deal of research and development has taken place. Over the years, we have tried many different materials and combinations, a time consuming endeavour culminating in the current design, which utilises the highest quality birch ply for the entire cabinet. Bracing and internal damping is kept to a minimum and strategically applied to help, not hinder the drivers. The ported cabinet has been designed to be placed close to room boundaries, where the bass performance is augmented significantly by the additional reinforcement offered by the nearby walls. In this position, it will outperform any similarly sized speaker regardless of origin, thanks in part to the shallow cabinet / wide baffle shape which gives the drivers the best possible operating conditions, allowing them to perform as if they are mounted in a virtual wall. This provides the most undisturbed sound field with the widest and most even dispersion possible from a real world cabinet shape. The crossover is simple, essentially first order, hardwired and incorporates air-cored chokes and selected bipolar and polypropylene capacitors (either copper foil or silver foil, depending on model). The internal cabling consists of either 99.99% pure copper or 99.99% pure silver Audio Note (UK) wire, depending on the exact model. (See specifications.) Consistent performance is a major issue in loudspeaker design and unfortunately all drive units vary slightly from each other, even if they look the same and have the same basic specification. Many loudspeaker manufacturer’s will tell you that they provide “computer matched” crossovers, and whilst this may be true in one sense (each crossover may have been matched to have the exact same capacitance, inductance and resistance) this essentially “passive” method does not adequately take into consideration the mechanical and acoustic variance present in the drive units themselves, where minute differences in acoustic behaviour will result in quite substantial differences in performance and sound. Therefore, to obtain the best possible combination of drivers and crossovers, we have developed a dynamic matching process. This ensures that each loudspeaker in a stereo pair matches a "master curve" and also its partner, to within 0.4dB. To the best of our knowledge, no other loudspeaker manufacturer achieves such close matching and tests 100% of its production. Another much overlooked area of loudspeaker design is the material choice for the drivers. It has become very fashionable to use all manner of exotic materials (beryllium, diamond, carbon fibre, ceramics etc.) as cone materials in modern drivers, mainly because it gives the impression that the manufacturer in question is making great strides in their research into better sounding speakers. The sad fact is none of these materials work as intended, as they all have their own distinct sonic signature, so no matter how the crossover is designed, this sonic signature will be present when the speaker reproduces music. It may be less obvious and audible with some types of music, but ultimately the chosen material will always imprint some of its own signature on whatever sound is reproduced. In addition, it is vitally important that the sound and characteristics of an individual drive unit are complimentary to those of its chosen partner, so that when an instrument is reproduced by both drive units (which is almost always the case), the upper range does not sound detached from the lower range and vice versa. This is an aspect of performance that cannot be measured by even the most sophisticated test equipment; it can ONLY be judged by listening. We at Audio Note are keenly aware of this and have deliberately chosen drive units whose sonic signatures are as closely matched as possible. This has led us to favour good, old fashioned paper and Hemp paper for the woofer cone and impregnated silk for the dome tweeter. These materials, when matched correctly, marry the low and high frequencies seamlessly, providing the best level of performance possible in the real world of acoustics.
Add to compare
Quick view
Add to wishlist

Audio Note AN-J-LX

,
6,790.00€
Προσθήκη στο καλάθι

Audio Note AN-J-LX

Audio Note AN-J-LX Details The majority of the high-end audio marketplace is occupied by ill-conceived low efficiency loudspeaker systems. These designs usually consist of several less-than-ideally matched drivers and a very complex crossover, crammed into a cabinet that exhibits the tonal and textural qualities of reinforced concrete. Their designers are blinded by the dogmatic quest for high sound pressure levels and flat response. But what of the other factors which are essential for emotionally involving music reproduction? What about coherence, full natural micro—as well as macro—dynamics, inner detail? What about LIFE? What about EMOTION? Sorry, they’re just not part of the “High Performance Audio” design brief. And music suffers for it. The design of the AN-J Loudspeaker, by contrast, follows an altogether different philosophy. It calls for a cabinet that complements the chosen drive units, rather than fighting against them. Instead of trying to kill the resonances, we tailor the cabinet to place them in frequency bands where they aid and enhance the operation of the drive units, culminating in a loudspeaker system that makes the most of the preceding amplifier’s output. The material choice for the cabinet is an area where a great deal of research and development has taken place. Over the years, we have tried many different materials and combinations, a time consuming endeavour culminating in the current design, which utilises the highest quality birch ply for the entire cabinet. Bracing and internal damping is kept to a minimum and strategically applied to help, not hinder the drivers. The ported cabinet has been designed to be placed close to room boundaries, where the bass performance is augmented significantly by the additional reinforcement offered by the nearby walls. In this position, it will outperform any similarly sized speaker regardless of origin, thanks in part to the shallow cabinet / wide baffle shape which gives the drivers the best possible operating conditions, allowing them to perform as if they are mounted in a virtual wall. This provides the most undisturbed sound field with the widest and most even dispersion possible from a real world cabinet shape. The crossover is simple, essentially first order, hardwired and incorporates air-cored chokes and selected bipolar and polypropylene capacitors (either copper foil or silver foil, depending on model). The internal cabling consists of either 99.99% pure copper or 99.99% pure silver Audio Note (UK) wire, depending on the exact model. (See specifications.) Consistent performance is a major issue in loudspeaker design and unfortunately all drive units vary slightly from each other, even if they look the same and have the same basic specification. Many loudspeaker manufacturer’s will tell you that they provide “computer matched” crossovers, and whilst this may be true in one sense (each crossover may have been matched to have the exact same capacitance, inductance and resistance) this essentially “passive” method does not adequately take into consideration the mechanical and acoustic variance present in the drive units themselves, where minute differences in acoustic behaviour will result in quite substantial differences in performance and sound. Therefore, to obtain the best possible combination of drivers and crossovers, we have developed a dynamic matching process. This ensures that each loudspeaker in a stereo pair matches a "master curve" and also its partner, to within 0.4dB. To the best of our knowledge, no other loudspeaker manufacturer achieves such close matching and tests 100% of its production. Another much overlooked area of loudspeaker design is the material choice for the drivers. It has become very fashionable to use all manner of exotic materials (beryllium, diamond, carbon fibre, ceramics etc.) as cone materials in modern drivers, mainly because it gives the impression that the manufacturer in question is making great strides in their research into better sounding speakers. The sad fact is none of these materials work as intended, as they all have their own distinct sonic signature, so no matter how the crossover is designed, this sonic signature will be present when the speaker reproduces music. It may be less obvious and audible with some types of music, but ultimately the chosen material will always imprint some of its own signature on whatever sound is reproduced. In addition, it is vitally important that the sound and characteristics of an individual drive unit are complimentary to those of its chosen partner, so that when an instrument is reproduced by both drive units (which is almost always the case), the upper range does not sound detached from the lower range and vice versa. This is an aspect of performance that cannot be measured by even the most sophisticated test equipment; it can ONLY be judged by listening. We at Audio Note are keenly aware of this and have deliberately chosen drive units whose sonic signatures are as closely matched as possible. This has led us to favour good, old fashioned paper and Hemp paper for the woofer cone and impregnated silk for the dome tweeter. These materials, when matched correctly, marry the low and high frequencies seamlessly, providing the best level of performance possible in the real world of acoustics.

Audio Note AN-J-LX

   
Audio Note ANK-LX Details The Audio Note ANK-LX is a compact "bookshelf" design, using two drive units per cabinet to cover a very wide frequency response, given its modest dimensions. Unlike many "bookshelf" designs, the AN-K is relatively efficient and offers the amplifier an easy "load," making it highly suitable for our range of superior quality, low-powered valve amplifiers. The majority of the high-end audio marketplace is occupied by ill-conceived low efficiency loudspeaker systems. These designs usually consist of several less-than-ideally matched drivers and a very complex crossover, crammed into a cabinet that exhibits the tonal and textural qualities of reinforced concrete. Their designers are blinded by the dogmatic quest for high sound pressure levels and flat response. But what of the other factors which are essential for emotionally involving music reproduction? What about coherence, full natural micro—as well as macro—dynamics, inner detail? What about LIFE? What about EMOTION? Sorry, they’re just not part of the “High Performance Audio” design brief. And music suffers for it. The design of the AN-K Loudspeaker, by contrast, follows an altogether different philosophy. It calls for a cabinet that complements the chosen drive units, rather than fighting against them. Instead of trying to kill the resonances, we tailor the cabinet to place them in frequency bands where they aid and enhance the operation of the drive units, culminating in a loudspeaker system that makes the most of the preceding amplifier’s output. The material choice for the cabinet is an area where a great deal of research and development has taken place. Over the years, we have tried many different materials and combinations, a time consuming endeavour culminating in the current design, which utilises the highest quality birch ply for the entire cabinet. Bracing and internal damping is kept to a minimum and strategically applied to help, not hinder, the drivers. The cabinet has been designed to be placed close to room boundaries, where the bass performance is augmented significantly by the additional reinforcement offered by the nearby walls. In this position, it will outperform any similarly sized speaker regardless of origin, thanks in part to the shallow cabinet / wide baffle shape which gives the drivers the best possible operating conditions, allowing them to perform as if they are mounted in a virtual wall. This provides the most undisturbed sound field with the widest and most even dispersion possible from a real world cabinet shape. The crossover is simple, essentially first order, hardwired and incorporates air-cored chokes and selected bipolar and polypropylene capacitors (either copper foil or silver foil, depending on model). The internal cabling consists of either 99.99% pure copper or 99.99% pure silver Audio Note (UK) wire, depending on the exact model. (See specifications) Consistent performance is a major issue in loudspeaker design and unfortunately all drive units vary slightly from each other, even if they look the same and have the same basic specification. Many loudspeaker manufacturer’s will tell you that they provide “computer matched” crossovers, and whilst this may be true in one sense (each crossover may have been matched to have the exact same capacitance, inductance and resistance) this essentially “passive” method does not adequately take into consideration the mechanical and acoustic variance present in the drive units themselves, where minute differences in acoustic behaviour will result in quite substantial differences in performance and sound. Therefore, to obtain the best possible combination of drivers and crossovers, we have developed a dynamic matching process. This ensures that each loudspeaker in a stereo pair matches a "master curve" and also its partner, to within 0.4dB. To the best of our knowledge, no other loudspeaker manufacturer achieves such close-matching and tests 100% of its production. Another much overlooked area of loudspeaker design is the material choice for the drivers. It has become very fashionable to use all manner of exotic materials (beryllium, diamond, carbon fibre, ceramics etc.) as cone materials in modern drivers, mainly because it gives the impression that the manufacturer in question is making great strides in their research into better sounding speakers. The sad fact is none of these materials work as intended, as they all have their own distinct sonic signature, so no matter how the crossover is designed, this sonic signature will be present when the speaker reproduces music. It may be less obvious and audible with some types of music, but ultimately the chosen material will always imprint some of its own signature on whatever sound is reproduced. In addition, it is vitally important that the sound and characteristics of an individual drive unit are complimentary to those of its chosen partner, so that when an instrument is reproduced by both drive units (which is almost always the case), the upper range does not sound detached from the lower range and visa versa. This is an aspect of performance that cannot be measured by even the most sophisticated test equipment; it can ONLY be judged by listening. We at Audio Note are keenly aware of this and have deliberately chosen drive units whose sonic signatures are as closely matched as possible. This has led us to favour good, old fashioned paper for the woofer cone and impregnated silk for the dome tweeter. These materials, when matched correctly, marry the low and high frequencies seamlessly, providing the best level of performance possible in the real world of acoustics.
Add to compare
Quick view
Add to wishlist

Audio Note ANK-LX

,
4,910.00€
Προσθήκη στο καλάθι

Audio Note ANK-LX

Audio Note ANK-LXDetails The Audio Note ANK-LX is a compact "bookshelf" design, using two drive units per cabinet to cover a very wide frequency response, given its modest dimensions. Unlike many "bookshelf" designs, the AN-K is relatively efficient and offers the amplifier an easy "load," making it highly suitable for our range of superior quality, low-powered valve amplifiers. The majority of the high-end audio marketplace is occupied by ill-conceived low efficiency loudspeaker systems. These designs usually consist of several less-than-ideally matched drivers and a very complex crossover, crammed into a cabinet that exhibits the tonal and textural qualities of reinforced concrete. Their designers are blinded by the dogmatic quest for high sound pressure levels and flat response. But what of the other factors which are essential for emotionally involving music reproduction? What about coherence, full natural micro—as well as macro—dynamics, inner detail? What about LIFE? What about EMOTION? Sorry, they’re just not part of the “High Performance Audio” design brief. And music suffers for it. The design of the AN-K Loudspeaker, by contrast, follows an altogether different philosophy. It calls for a cabinet that complements the chosen drive units, rather than fighting against them. Instead of trying to kill the resonances, we tailor the cabinet to place them in frequency bands where they aid and enhance the operation of the drive units, culminating in a loudspeaker system that makes the most of the preceding amplifier’s output. The material choice for the cabinet is an area where a great deal of research and development has taken place. Over the years, we have tried many different materials and combinations, a time consuming endeavour culminating in the current design, which utilises the highest quality birch ply for the entire cabinet. Bracing and internal damping is kept to a minimum and strategically applied to help, not hinder, the drivers. The cabinet has been designed to be placed close to room boundaries, where the bass performance is augmented significantly by the additional reinforcement offered by the nearby walls. In this position, it will outperform any similarly sized speaker regardless of origin, thanks in part to the shallow cabinet / wide baffle shape which gives the drivers the best possible operating conditions, allowing them to perform as if they are mounted in a virtual wall. This provides the most undisturbed sound field with the widest and most even dispersion possible from a real world cabinet shape. The crossover is simple, essentially first order, hardwired and incorporates air-cored chokes and selected bipolar and polypropylene capacitors (either copper foil or silver foil, depending on model). The internal cabling consists of either 99.99% pure copper or 99.99% pure silver Audio Note (UK) wire, depending on the exact model. (See specifications) Consistent performance is a major issue in loudspeaker design and unfortunately all drive units vary slightly from each other, even if they look the same and have the same basic specification. Many loudspeaker manufacturer’s will tell you that they provide “computer matched” crossovers, and whilst this may be true in one sense (each crossover may have been matched to have the exact same capacitance, inductance and resistance) this essentially “passive” method does not adequately take into consideration the mechanical and acoustic variance present in the drive units themselves, where minute differences in acoustic behaviour will result in quite substantial differences in performance and sound. Therefore, to obtain the best possible combination of drivers and crossovers, we have developed a dynamic matching process. This ensures that each loudspeaker in a stereo pair matches a "master curve" and also its partner, to within 0.4dB. To the best of our knowledge, no other loudspeaker manufacturer achieves such close-matching and tests 100% of its production. Another much overlooked area of loudspeaker design is the material choice for the drivers. It has become very fashionable to use all manner of exotic materials (beryllium, diamond, carbon fibre, ceramics etc.) as cone materials in modern drivers, mainly because it gives the impression that the manufacturer in question is making great strides in their research into better sounding speakers. The sad fact is none of these materials work as intended, as they all have their own distinct sonic signature, so no matter how the crossover is designed, this sonic signature will be present when the speaker reproduces music. It may be less obvious and audible with some types of music, but ultimately the chosen material will always imprint some of its own signature on whatever sound is reproduced. In addition, it is vitally important that the sound and characteristics of an individual drive unit are complimentary to those of its chosen partner, so that when an instrument is reproduced by both drive units (which is almost always the case), the upper range does not sound detached from the lower range and visa versa. This is an aspect of performance that cannot be measured by even the most sophisticated test equipment; it can ONLY be judged by listening. We at Audio Note are keenly aware of this and have deliberately chosen drive units whose sonic signatures are as closely matched as possible. This has led us to favour good, old fashioned paper for the woofer cone and impregnated silk for the dome tweeter. These materials, when matched correctly, marry the low and high frequencies seamlessly, providing the best level of performance possible in the real world of acoustics.

Audio Note ANK-LX

AN-E-SPX Limited Field coil drive units, or in laymen’s terms, powered drive units, using an electromagnet to generate the magnetic field with which the voice coil interacts (by Lorentz Force), date from the earliest days of electrical music reproduction. At the time, not long after the turn of the 20th century, permanent magnet technology was not sufficiently advanced to make a conveniently sized, and priced, speaker drive unit. Electrical efficiency was much less of a consideration then, and there was often a ‘free’ source of power for the field coil – by using the speaker field coil as the smoothing choke in the device’s power supply. Now, the question arises as to why revisit an older, now largely redundant technology? That is because of the sound. The effect is not that there is more in terms of quantity from the speakers, there isn’t, there’s actually less. They sound calmer, more relaxed and graceful, yet there is now more information – in terms of tonality, subtle inflection, and atmosphere. What was previously obscured is now revealed. The scales have fallen from your ears!
Add to compare
Quick view
Add to wishlist

AN-E-SPX Limited

,
59,770.00€
Προσθήκη στο καλάθι

Audio Note AN-E Ltd

AN-E-SPX Limited Field coil drive units, or in laymen’s terms, powered drive units, using an electromagnet to generate the magnetic field with which the voice coil interacts (by Lorentz Force), date from the earliest days of electrical music reproduction. At the time, not long after the turn of the 20th century, permanent magnet technology was not sufficiently advanced to make a conveniently sized, and priced, speaker drive unit. Electrical efficiency was much less of a consideration then, and there was often a ‘free’ source of power for the field coil – by using the speaker field coil as the smoothing choke in the device’s power supply. Now, the question arises as to why revisit an older, now largely redundant technology? That is because of the sound. The effect is not that there is more in terms of quantity from the speakers, there isn’t, there’s actually less. They sound calmer, more relaxed and graceful, yet there is now more information – in terms of tonality, subtle inflection, and atmosphere. What was previously obscured is now revealed. The scales have fallen from your ears!

AN-E-SPX Limited

JADIS SE300B Description The SE300B supplies a power of 10W RMS and functions in pure class-A with single-ended mounting (the two tubes are in parallel) with an automatic bias. The two high voltages, driver and power, have vacuum-tube power supplies. The bandwidth (at –3dB) is from 20Hz to 20kHz, without any feedback. The driver stage, powered at 400V, is built around a double-triode 6SN7. The two elements of the tube are mounted in cascade. The output stage is powered at 320V, which allows the tubes to work in the best conditions.
Add to compare
Quick view
Add to wishlist

JADIS SE300B

,
15,700.00€
Προσθήκη στο καλάθι

JADIS SE300B

JADIS SE300BDescription The SE300B supplies a power of 10W RMS and functions in pure class-A with single-ended mounting (the two tubes are in parallel) with an automatic bias. The two high voltages, driver and power, have vacuum-tube power supplies. The bandwidth (at –3dB) is from 20Hz to 20kHz, without any feedback. The driver stage, powered at 400V, is built around a double-triode 6SN7. The two elements of the tube are mounted in cascade. The output stage is powered at 320V, which allows the tubes to work in the best conditions.

JADIS SE300B

Marantz CINEMA 30 Crafted with premium materials for timeless style, the CINEMA 30 is the most refined AV Receiver Marantz has ever created, redefining premium home theater sound. Designed with exclusive technology honed from decades of rich heritage, its 11.4 channels deliver unrivaled performance and can easily power even the largest home theaters. • Made in Shirakawa, Japan • 11.4 Channels • 140 Watts per Channel • 7 HDMI Inputs (all 8K) and eARC • 8K & Dolby Atmos • HEOS Built-in Timeless yet modern in style Excellence is heard and seen. The CINEMA 30 AV Receiver is meticulously crafted in Japan with authentic materials in a modern style befitting its rich heritage and stunning performance. No Mechanical Compromise HiFi performance technologies, such as HDAM SA-2 and others, elevate the CINEMA 30 to levels of performance rarely found in an AVR. Customised and Calibrated by Marantz Sound Masters for You The Cinema 30 features the best calibration and tuning tools, allowing you to get the best performance from your system. Technology Leader Seven HDMI inputs, as well as digital, analogue and phono inputs – even analogue video plus speaker and preamp outputs – ensure you can connect to almost any source you have.
Add to compare
Quick view
Add to wishlist

Marantz CINEMA 30

,
4,689.00€
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Marantz CINEMA 30

Marantz CINEMA 30 Crafted with premium materials for timeless style, the CINEMA 30 is the most refined AV Receiver Marantz has ever created, redefining premium home theater sound. Designed with exclusive technology honed from decades of rich heritage, its 11.4 channels deliver unrivaled performance and can easily power even the largest home theaters. • Made in Shirakawa, Japan • 11.4 Channels • 140 Watts per Channel • 7 HDMI Inputs (all 8K) and eARC • 8K & Dolby Atmos • HEOS Built-in Timeless yet modern in style Excellence is heard and seen. The CINEMA 30 AV Receiver is meticulously crafted in Japan with authentic materials in a modern style befitting its rich heritage and stunning performance. No Mechanical Compromise HiFi performance technologies, such as HDAM SA-2 and others, elevate the CINEMA 30 to levels of performance rarely found in an AVR. Customised and Calibrated by Marantz Sound Masters for You The Cinema 30 features the best calibration and tuning tools, allowing you to get the best performance from your system. Technology Leader Seven HDMI inputs, as well as digital, analogue and phono inputs – even analogue video plus speaker and preamp outputs – ensure you can connect to almost any source you have.

Marantz CINEMA 30

Sorane-Tonearm TA-1 Classic looking tonearm, machine-tooled and hand-assembled by skilled Japanese craftsmen. It features a precise detachable headshell and a gimball bearing design for excellent bass and imaging. Sorane/ All handmade and hand assembled by craftsmen Since the company's foundation in 1974, Katsuaki Ishiyama-san has established and accumulated extensive knowhow in the design and development of various tonearms and other analog equipment. Each piece is manufactured through a completely handmade and assembled process, based on his belief that fine-tuning can only be achieved through the precise and sensitive hands of skilled craftsmen. Even though modern technology such as CNC milling machines is used at their plant for basic parts production, they still rely on the expertise of their craftsmen, particularly during the assembly process. This ensures that the numerous parts achieve ideal mechanical surface contact through meticulous hand-tuning and hand-adjustment. Walden High-End Audio Products High-End Audio Brands Tonearms Sorane TA-1 Shared Features Amongst Sorane Tonearms (a) Gimbal-bearing designs for excellent bass, dynamics and imaging, as well as unconditional azimuth stability (the biggest problem for unipivots). (b) Antiskating (c) Detachable headshells to allow quick changes of cartridges, the adoption of various mass headshells (to help change the effective mass of the arms and cartridges), and the ability to mount cartridges in a well lit area, in a safe and convenient manner. (d) Machine-tooled and hand-assembled by skilled Japanese craftsmen. This highly skilled and delicate hand-assembly differentiates Sorane/Abis tonearms from similar mass-produced Japanese tonearms. Standard quality high-volume tonearms are produced by die-casting and semi-automatic assembly line processes to keep production costs low. (e) Skilled hand assembly does not simply mean “combining the constituent parts by hand”. Skilled hand assembly involves measurement, adjustment and hand-fitting to produce optimal interface between machined surfaces. Once completed, the fitment between every part is ideal, satisfying the necessary conditions for vibration-free and noise-free reproduction of analog sound. (f) Most importantly, the key to tonearm quality is highly sensitive and delicate motion, for which the bearings are the determining factor. (g) Concerning the reproduced sound from these models: The designer is confident you will get precise and clean sound, which can only be had from hand-made tonearms, but at a very reasonable price with these arms. (h) In particular, the SA-1.2 will produce rich and tight bass, coming from the extremely rigid rectangular shaped arm-wand. (i) In SA-1.2, two sets of fine radial bearings are installed for both horizontal (set in the bearing stem column in this photo) and vertical (further small bearing at tonearm wand). This assures audiophiles of smooth tonearm function, greater longevity, better consistency, and enhanced ability to track warped vinyl. (j) The same type radial bearing used in the SA-1.2 for horizontal motion is also used for the TA-1 and TA-1L, while a delicate pivot bearing is employed for vertical movement (this is still a bearing but the bearing axis end is cone shaped, and requires careful assembly and adjustment). The right side cone in this photo is inserted into the miniature bearing inner race.
Add to compare
Quick view
Add to wishlist

SORANE TA-1L Tonearm

,
2,550.00€
Προσθήκη στο καλάθι

SORANE TA-1L Tonearm

SORANE TA-1L Tonearm Gimbal-type bearing design 12 inch S-Shaped tonearm for excellent bass, dynamics and imaging A successful tonearm must have the sensitivity and stability to retrieve low-level signals and the quality of the bearings (such as used in the TA tonearms) is paramount. Whilst tonearm mass and cartridge compliance set the low frequency resonance point, high quality bearings must be used that allow the arm to follow the advance of the groove, to navigate the vinyl groove without grabbing/resistance/noise generation.

SORANE TA-1L Tonearm

Volumio Rivo Plus The Rivo Plus builds on the acclaimed Rivo model, now featuring a dedicated ASIC for enhanced S/PDIF and AES-EBU outputs and upgraded MEMS clocks in the USB HUB IC. This delivers pure digital sound and seamless connectivity for audiophiles. OPTIMIZED CLOCK STABILITY Upgraded MEMS clocks in the USB HUB IC enhance reclocking and signal integrity at the USB DAC port, ensuring superior jitter stability and consistent audio quality I2S/DSD OVER HDMI CONNECTIVITY ADDED I2S/DSD over HDMI interface offers optimal sonic performance for some external DACs compared to S/PDIF, AES-EBU, and USB DEDICATED SUPPORT One-on-one support to help with everything from set-up to troubleshooting. Always available for you! THE ULTIMATE DIGITAL TRANSPORT The Rivo+ is the enhanced version of our award-winning Rivo digital transport. Engineered based on user feedback, Rivo+ elevates the already excellent qualities of the original. Key upgrades include a dedicated ASIC for cleaner S/PDIF and AES-EBU outputs, improved MEMS clocks for lower jitter, I2S over HDMI connectivity for compatible high-end DACs, and a 12V trigger to power on/off other components. If you demand the pinnacle of digital transport performance, the Rivo+ is the solution. ENHANCED AUDIO VIA I2S/DSD OVER HDMI FOR DISCERNING LISTENERS The Rivo+ features a dedicated ASIC to generate the S/PDIF and AES-EBU output signals, offloading this crucial task from the CPU. This specialized integrated circuit is designed to produce these digital output signals with uncompromising precision, free from any potential interference or jitter introduced by the main processor. Powering this dedicated ASIC is a high-quality MEMS (Micro-Electro-Mechanical Systems) clock, which provides an exceptionally stable and low-jitter timing reference. Coupled with low-noise voltage regulators, this enhancement to the RIVO+ ensures the output signals maintain the utmost purity and refinement. ENJOY MUSIC FROM YOUR FAVORITE SOURCES Rivo+ lets you stream from your favorite music services Bring your content from local or network-attached drives and play internet radio ENGINEERED FOR SIGNAL PRECISION Upgraded MEMS clocks in the USB HUB IC enhance reclocking and signal integrity for Rivo+ especially when connected to the USB DAC port. This delivers exceptional jitter and frequency stability, reducing susceptibility to temperature changes and aging for consistently high-quality audio output. EASY SETUP Getting started just takes a couple of minutes with the Volumio official iOS and Android apps MADE IN ITALY All Volumio products are proudly designed and assembled in Florence Italy ROON READY All Volumio products are Roon Ready certified by Roon Labs. This allows seamless integration with Roon system and guarantees the use of Roon streaming technology with Volumio Primo, without compromising high audio performance. MULTIPLE CONNECTIVITY OPTIONS TO EXPLORE S/PDIF and AES-EBU outputs generated by a dedicated ASIC with low-noise power supply + I2S/DSD over HDMI interface for optimized connection and enhanced audio performance. VOLUMIO PREMIUM BUILT IN On board, the Rivo+ is the latest version of Volumio – Volumio AI- that incorporates Supersearch an AI-powered search function that is meant to optimize your music discovery. Volumio OS comes with a Multi-room capability that creates an integrated environment with other Volumio stations in your home.
Add to compare
Quick view
Add to wishlist

Volumio Rivo Plus

,
1,299.00€
Προσθήκη στο καλάθι

Volumio Rivo Plus

Volumio Rivo Plus The Rivo Plus builds on the acclaimed Rivo model, now featuring a dedicated ASIC for enhanced S/PDIF and AES-EBU outputs and upgraded MEMS clocks in the USB HUB IC. This delivers pure digital sound and seamless connectivity for audiophiles. OPTIMIZED CLOCK STABILITY Upgraded MEMS clocks in the USB HUB IC enhance reclocking and signal integrity at the USB DAC port, ensuring superior jitter stability and consistent audio quality I2S/DSD OVER HDMI CONNECTIVITY ADDED I2S/DSD over HDMI interface offers optimal sonic performance for some external DACs compared to S/PDIF, AES-EBU, and USB DEDICATED SUPPORT One-on-one support to help with everything from set-up to troubleshooting. Always available for you! THE ULTIMATE DIGITAL TRANSPORT The Rivo+ is the enhanced version of our award-winning Rivo digital transport. Engineered based on user feedback, Rivo+ elevates the already excellent qualities of the original. Key upgrades include a dedicated ASIC for cleaner S/PDIF and AES-EBU outputs, improved MEMS clocks for lower jitter, I2S over HDMI connectivity for compatible high-end DACs, and a 12V trigger to power on/off other components. If you demand the pinnacle of digital transport performance, the Rivo+ is the solution. ENHANCED AUDIO VIA I2S/DSD OVER HDMI FOR DISCERNING LISTENERS The Rivo+ features a dedicated ASIC to generate the S/PDIF and AES-EBU output signals, offloading this crucial task from the CPU. This specialized integrated circuit is designed to produce these digital output signals with uncompromising precision, free from any potential interference or jitter introduced by the main processor. Powering this dedicated ASIC is a high-quality MEMS (Micro-Electro-Mechanical Systems) clock, which provides an exceptionally stable and low-jitter timing reference. Coupled with low-noise voltage regulators, this enhancement to the RIVO+ ensures the output signals maintain the utmost purity and refinement. ENJOY MUSIC FROM YOUR FAVORITE SOURCES Rivo+ lets you stream from your favorite music services Bring your content from local or network-attached drives and play internet radio ENGINEERED FOR SIGNAL PRECISION Upgraded MEMS clocks in the USB HUB IC enhance reclocking and signal integrity for Rivo+ especially when connected to the USB DAC port. This delivers exceptional jitter and frequency stability, reducing susceptibility to temperature changes and aging for consistently high-quality audio output. EASY SETUP Getting started just takes a couple of minutes with the Volumio official iOS and Android apps MADE IN ITALY All Volumio products are proudly designed and assembled in Florence Italy ROON READY All Volumio products are Roon Ready certified by Roon Labs. This allows seamless integration with Roon system and guarantees the use of Roon streaming technology with Volumio Primo, without compromising high audio performance. MULTIPLE CONNECTIVITY OPTIONS TO EXPLORE S/PDIF and AES-EBU outputs generated by a dedicated ASIC with low-noise power supply + I2S/DSD over HDMI interface for optimized connection and enhanced audio performance. VOLUMIO PREMIUM BUILT IN On board, the Rivo+ is the latest version of Volumio – Volumio AI- that incorporates Supersearch an AI-powered search function that is meant to optimize your music discovery. Volumio OS comes with a Multi-room capability that creates an integrated environment with other Volumio stations in your home.

Volumio Rivo Plus

Volumio Integro The Integrated Network Amplifier The Volumio Integro is a compact, all-in-one (amplifier + streamer) audio solution combining a powerful amplifier with advanced network streaming capabilities. This integrated network amplifier combines direct-digital dual mono Class-D technology in a sleek, compact design. With Volumio Premium features provide a HiFi system that streams music from services like Spotify, Tidal, and Qobuz, all controlled through a single app. It also has seamless Roon Integration through the custom made Volumio OS! Crafted in Italy, the Integro offers audiophile-grade sound quality, seamless connectivity, and user-friendly setup, making it a standout choice for music enthusiasts. Volumio Integro – The Integrated Network Amplifier The Integrated Network Amplifier with direct-digital dual mono Class-D amplifier technology, enclosed in a stylish compact design. Includes all Volumio Premium features. ALL-IN-ONE STREAMER INTEGRO is a plug & play device. Once you connect your speakers, you have a complete hi-fi system. No extra equipment required. CONNECT YOUR MUSIC IN ONE APP INTEGRO lets you stream from your favorite music services such as Spotify, Tidal and Qobuz. DEDICATED SUPPORT One-on-one support to help with everything from set-up to troubleshooting. Always available for you! THE BEST SOUND DIRECTLY TO YOUR SPEAKERS INTEGRO is ready to plug & play device, just connect your speakers to it and you have a complete HiFi system to enjoy your music to the fullest. No need for extra equipment, all of the components necessary come in a compact design, giving you the possibility to put the Integro in any place you want. ENJOY MUSIC FROM YOUR FAVORITE SOURCES Integro lets you stream from your favorite music services Bring your content from local or network-attached drives and play internet radio. Integro lets you stream from your favorite music services such as Spotify, Tidal and Qobuz. Volumio plugins allow you to connect to many additional services and functionalities such as Youtube, Soundcloud, Radio Paradise, FusionDSP and more. Bring your content from local or network-attached drives and play internet radio all thanks to Volumio OS. EASY SETUP Getting started just takes a couple of minutes with the Volumio official iOS and Android apps MADE IN ITALY All Volumio products are proudly designed and assembled in Florence Italy OON READY All Volumio products are Roon Ready certified by Roon Labs. This allows seamless integration with Roon system and guarantees the use of Roon streaming technology with Volumio Integro, without compromising high audio performance. A LOOK TO BE SEEN AND FELT Every aspect of the Integro was carefully designed with the collaboration of the Red Dot Award winner Design Narratives. In addition to the compact design, the electronics that give Integro its musicality are covered in a chassis of antimagnetic aluminum, with two orange knobs to control volume and inputs options, accompanied by an OLED display. IMMERSIVE SOUND: INTEGRO PLUGGED IN INTEGRO has one of the world’s best-sounding headphone amplifiers you can use for your intimate listening and merry them to a specially tuned dual-mono Class-D amplifier design, powered by MA12070P from Infineon. From whichever source you are playing your music, Integro brings out the most wonderful details to life. YOUR MUSIC SOUNDS AS IT SHOULD INTEGRO has one of the world’s best-sounding headphone amplifiers you can use for your intimate listening and merry them to a specially tuned dual-mono Class-D amplifier design, powered by MA12070P from Infineon. From whichever source you are playing your music, Integro brings out the most wonderful details to life. ALL THE CONNECTIONS YOU NEED Integro has one single-ended analog input (RCA) and two digital SPDIF both optical and coaxial. In terms of outputs there is a subwoofer out, and the HDMI out can be used to take advantage of the OSD menu of Volumio. VOLUMIO PREMIUM BUILT IN On board, the Integro is the latest version of Volumio – Volumio AI- that incorporates Supersearch an AI-powered search function that is meant to optimize your music discovery. Volumio OS comes with a Multi-room capability that creates an integrated environment with other Volumio stations in your home.
Add to compare
Quick view
Add to wishlist

Volumio Integro

,
1,199.00€
Προσθήκη στο καλάθι

Volumio Integro

Volumio Integro The Integrated Network Amplifier The Volumio Integro is a compact, all-in-one (amplifier + streamer) audio solution combining a powerful amplifier with advanced network streaming capabilities. This integrated network amplifier combines direct-digital dual mono Class-D technology in a sleek, compact design. With Volumio Premium features provide a HiFi system that streams music from services like Spotify, Tidal, and Qobuz, all controlled through a single app. It also has seamless Roon Integration through the custom made Volumio OS! Crafted in Italy, the Integro offers audiophile-grade sound quality, seamless connectivity, and user-friendly setup, making it a standout choice for music enthusiasts. Volumio Integro – The Integrated Network Amplifier The Integrated Network Amplifier with direct-digital dual mono Class-D amplifier technology, enclosed in a stylish compact design. Includes all Volumio Premium features. ALL-IN-ONE STREAMER INTEGRO is a plug & play device. Once you connect your speakers, you have a complete hi-fi system. No extra equipment required. CONNECT YOUR MUSIC IN ONE APP INTEGRO lets you stream from your favorite music services such as Spotify, Tidal and Qobuz. DEDICATED SUPPORT One-on-one support to help with everything from set-up to troubleshooting. Always available for you! THE BEST SOUND DIRECTLY TO YOUR SPEAKERS INTEGRO is ready to plug & play device, just connect your speakers to it and you have a complete HiFi system to enjoy your music to the fullest. No need for extra equipment, all of the components necessary come in a compact design, giving you the possibility to put the Integro in any place you want. ENJOY MUSIC FROM YOUR FAVORITE SOURCES Integro lets you stream from your favorite music services Bring your content from local or network-attached drives and play internet radio. Integro lets you stream from your favorite music services such as Spotify, Tidal and Qobuz. Volumio plugins allow you to connect to many additional services and functionalities such as Youtube, Soundcloud, Radio Paradise, FusionDSP and more. Bring your content from local or network-attached drives and play internet radio all thanks to Volumio OS. EASY SETUP Getting started just takes a couple of minutes with the Volumio official iOS and Android apps MADE IN ITALY All Volumio products are proudly designed and assembled in Florence Italy OON READY All Volumio products are Roon Ready certified by Roon Labs. This allows seamless integration with Roon system and guarantees the use of Roon streaming technology with Volumio Integro, without compromising high audio performance. A LOOK TO BE SEEN AND FELT Every aspect of the Integro was carefully designed with the collaboration of the Red Dot Award winner Design Narratives. In addition to the compact design, the electronics that give Integro its musicality are covered in a chassis of antimagnetic aluminum, with two orange knobs to control volume and inputs options, accompanied by an OLED display. IMMERSIVE SOUND: INTEGRO PLUGGED IN INTEGRO has one of the world’s best-sounding headphone amplifiers you can use for your intimate listening and merry them to a specially tuned dual-mono Class-D amplifier design, powered by MA12070P from Infineon. From whichever source you are playing your music, Integro brings out the most wonderful details to life. YOUR MUSIC SOUNDS AS IT SHOULD INTEGRO has one of the world’s best-sounding headphone amplifiers you can use for your intimate listening and merry them to a specially tuned dual-mono Class-D amplifier design, powered by MA12070P from Infineon. From whichever source you are playing your music, Integro brings out the most wonderful details to life. ALL THE CONNECTIONS YOU NEED Integro has one single-ended analog input (RCA) and two digital SPDIF both optical and coaxial. In terms of outputs there is a subwoofer out, and the HDMI out can be used to take advantage of the OSD menu of Volumio. VOLUMIO PREMIUM BUILT IN On board, the Integro is the latest version of Volumio – Volumio AI- that incorporates Supersearch an AI-powered search function that is meant to optimize your music discovery. Volumio OS comes with a Multi-room capability that creates an integrated environment with other Volumio stations in your home.

Volumio Integro

Volumio Rivo The Music Player Transport to give the maximum performance in audio streaming. A pure digital streamer to focus on what matters the most, to listen to all music exactly as the artist intended. Includes all Volumio Premium features Your DAC is receiving the purest and most error-free USB signal, thanks to its proprietary error correction and reclocking technology. RIVO lets you stream from your favorite music services such as Spotify, Tidal and Qobuz. One-on-one support to help with everything from set-up to troubleshooting. Always available for you! EISA AWARD BEST DIGITAL PLAYER 2023-2024 "It’s an impressive marriage of well-crafted hardware and the proven Volumio software. Allowing you to stream your own music library, play files from USB storage, and browse its myriad streaming options." MAXIMUM COMPATIBILITY FOR YOUR STREAMING NEEDS RIVO means STREAM in Italian and in fact this is the essence of the machine. It streams music to your DAC. Nothing more, nothing less. But it does it very, very well. If you have a DAC you like or an integrated amplifier/pre amplifier with a DAC built-in, RIVO is optimized to stream the music all high-resolution formats to them, all with its authentic details. ENJOY MUSIC FROM YOUR FAVORITE SOURCES Rivo lets you stream from your favorite music services Bring your content from local or network-attached drives and play internet radio POWERED TO MAKE A DIFFERENCE Power supply is separated for each section, with one dedicated to the internal clock that has its own stabilizer. Before powering the circuits, a filtering section has been provided, based on a chain of inductors and electrolytic capacitors with ad-hoc developed cells. All integral parts of RIVO have, as a result, high performance and stability on their own, which together creates a completely noise-reducing and reliable device EASY SETUP Getting started just takes a couple of minutes with the Volumio official iOS and Android apps MADE IN ITALY All Volumio products are proudly designed and assembled in Florence Italy ROON READY All Volumio products are Roon Ready certified by Roon Labs. allowing seamless integration with Roon ENGINEERING MADE SIMPLE Simplicity on the architecture of RIVO, by building a digital signal path as clean as possible. Filtering and isolation have been meticulously designed by employing multiple 1:1 OFC copper grain-oriented transformers, which guarantee the galvanic isolation of the digital outputs (SPDIF and AES/EBU). This means the digital signal path will arrive in your DAC without any filtering, any changes. You are certain your music will be the clearest and most natural. MULTIPLE CONNECTIVITY OPTIONS TO EXPLORE S/PDIF and AES-EBU outputs with Galvanic isolation and power filtering + USB Digital outputs with power filtering and a dedicated clock. VOLUMIO PREMIUM BUILT IN On board, the Rivo is the latest version of Volumio – Volumio AI- that incorporates Supersearch an AI-powered search function that is meant to optimize your music discovery. Volumio OS comes with a Multi-room capability that creates an integrated environment with other Volumio stations in your home.
Add to compare
Quick view
Add to wishlist

Volumio Rivo

,
989.00€
Προσθήκη στο καλάθι

Volumio Rivo

Volumio Rivo The Music Player Transport to give the maximum performance in audio streaming. A pure digital streamer to focus on what matters the most, to listen to all music exactly as the artist intended. Includes all Volumio Premium features Your DAC is receiving the purest and most error-free USB signal, thanks to its proprietary error correction and reclocking technology. RIVO lets you stream from your favorite music services such as Spotify, Tidal and Qobuz. One-on-one support to help with everything from set-up to troubleshooting. Always available for you! EISA AWARD BEST DIGITAL PLAYER 2023-2024 "It’s an impressive marriage of well-crafted hardware and the proven Volumio software. Allowing you to stream your own music library, play files from USB storage, and browse its myriad streaming options." MAXIMUM COMPATIBILITY FOR YOUR STREAMING NEEDS RIVO means STREAM in Italian and in fact this is the essence of the machine. It streams music to your DAC. Nothing more, nothing less. But it does it very, very well. If you have a DAC you like or an integrated amplifier/pre amplifier with a DAC built-in, RIVO is optimized to stream the music all high-resolution formats to them, all with its authentic details. ENJOY MUSIC FROM YOUR FAVORITE SOURCES Rivo lets you stream from your favorite music services Bring your content from local or network-attached drives and play internet radio POWERED TO MAKE A DIFFERENCE Power supply is separated for each section, with one dedicated to the internal clock that has its own stabilizer. Before powering the circuits, a filtering section has been provided, based on a chain of inductors and electrolytic capacitors with ad-hoc developed cells. All integral parts of RIVO have, as a result, high performance and stability on their own, which together creates a completely noise-reducing and reliable device EASY SETUP Getting started just takes a couple of minutes with the Volumio official iOS and Android apps MADE IN ITALY All Volumio products are proudly designed and assembled in Florence Italy ROON READY All Volumio products are Roon Ready certified by Roon Labs. allowing seamless integration with Roon ENGINEERING MADE SIMPLE Simplicity on the architecture of RIVO, by building a digital signal path as clean as possible. Filtering and isolation have been meticulously designed by employing multiple 1:1 OFC copper grain-oriented transformers, which guarantee the galvanic isolation of the digital outputs (SPDIF and AES/EBU). This means the digital signal path will arrive in your DAC without any filtering, any changes. You are certain your music will be the clearest and most natural. MULTIPLE CONNECTIVITY OPTIONS TO EXPLORE S/PDIF and AES-EBU outputs with Galvanic isolation and power filtering + USB Digital outputs with power filtering and a dedicated clock. VOLUMIO PREMIUM BUILT IN On board, the Rivo is the latest version of Volumio – Volumio AI- that incorporates Supersearch an AI-powered search function that is meant to optimize your music discovery. Volumio OS comes with a Multi-room capability that creates an integrated environment with other Volumio stations in your home.

Volumio Rivo

Hot
Volumio Primo The Music Network Player and Streamer with a high-level DAC that brings you to the world of streaming without any compromise. Includes all Volumio Premium features. Made with SABRE DACs connected in I2S to the digital input section, that can satisfy any enthusiast entering the world of streamers. PRIMO lets you stream from your favorite music services such as Spotify, Tidal and Qobuz. One-on-one support to help with everything from set-up to troubleshooting. Always available for you! A COMPLETE REDESIGN. Designed by the latest Red Dot Award winner, Design Narratives Ltd. has designed the Primo around a chassis made of antimagnetic aluminum. Complementing with a dark wood texture front panel and adding a status LED and power button, giving a 360˚ aesthetic change from our first version of Primo. ENJOY MUSIC FROM YOUR FAVORITE SOURCES Primo lets you stream from your favorite music services Bring your content from local or network-attached drives and play internet radio A BUILT IN TOP OF THE LINE DAC TO BRING HI-FI SOUND A truly complete product, for those who already have an audio system and want to complete it with a high-level DAC-Streamer. Volumio Primo was made with the top of the SABRE DACs -the ESS 9038Q2M– in differential configuration connected in I2S to the digital input section, that can bring any enthusiast to the world of streamers without compromising. POWER COMES FROM WITHIN With all internal components carefully being examined for improvements, Primo was developed with a highly performant quad-core processor, making Primo achieve first-class efficiency and speed for audio reproduction. The latest Amlogic Quadcore CPU running at 1.9GHz and 2GB of RAM form Primo brain that effortlessly runs the Volumio OS. GET WELL CONNECTED Explore a wide range of connectivity options with Primo. Analogue audio outputs are available in both balanced and single-ended formats, and there’s a digital SPDIF coaxial output, one HDMI port for an external monitor and two USB ports. VOLUMIO PREMIUM BUILT IN On board, the Primo is the latest version of Volumio – Volumio AI- that incorporates Supersearch an AI-powered search function that is meant to optimize your music discovery. Volumio OS comes with a Multi-room capability that creates an integrated environment with other Volumio stations in your home.
Add to compare
Quick view
Add to wishlist

Volumio Primo

,
799.00€
Προσθήκη στο καλάθι

Volumio Primo

Volumio PrimoThe Music Network Player and Streamer with a high-level DAC that brings you to the world of streaming without any compromise. Includes all Volumio Premium features. Made with SABRE DACs connected in I2S to the digital input section, that can satisfy any enthusiast entering the world of streamers. PRIMO lets you stream from your favorite music services such as Spotify, Tidal and Qobuz. One-on-one support to help with everything from set-up to troubleshooting. Always available for you! A COMPLETE REDESIGN. Designed by the latest Red Dot Award winner, Design Narratives Ltd. has designed the Primo around a chassis made of antimagnetic aluminum. Complementing with a dark wood texture front panel and adding a status LED and power button, giving a 360˚ aesthetic change from our first version of Primo. ENJOY MUSIC FROM YOUR FAVORITE SOURCES Primo lets you stream from your favorite music services Bring your content from local or network-attached drives and play internet radio A BUILT IN TOP OF THE LINE DAC TO BRING HI-FI SOUND A truly complete product, for those who already have an audio system and want to complete it with a high-level DAC-Streamer. Volumio Primo was made with the top of the SABRE DACs -the ESS 9038Q2M– in differential configuration connected in I2S to the digital input section, that can bring any enthusiast to the world of streamers without compromising. POWER COMES FROM WITHIN With all internal components carefully being examined for improvements, Primo was developed with a highly performant quad-core processor, making Primo achieve first-class efficiency and speed for audio reproduction. The latest Amlogic Quadcore CPU running at 1.9GHz and 2GB of RAM form Primo brain that effortlessly runs the Volumio OS. GET WELL CONNECTED Explore a wide range of connectivity options with Primo. Analogue audio outputs are available in both balanced and single-ended formats, and there’s a digital SPDIF coaxial output, one HDMI port for an external monitor and two USB ports. VOLUMIO PREMIUM BUILT IN On board, the Primo is the latest version of Volumio – Volumio AI- that incorporates Supersearch an AI-powered search function that is meant to optimize your music discovery. Volumio OS comes with a Multi-room capability that creates an integrated environment with other Volumio stations in your home.

Volumio Primo

ADVANCE PARIS X-P700 The affordable high-end preamp Succeeding the X-P500, the X-P700 offers technical refinements rarely encountered in this range: dual mono design and the most direct signal processing possible (Direct Path). Supreme refinement, it is possible to choose between two output schemes: the class A mode using bipolars in double cascade assembly, close to a tube gradient, and the discrete mode, based on a JFet differential and current mirror in the bipolar, polarized in class AB, more traditional. Its design is very sober and refined, a single rotary knob is present with a push button to validate the choices: access to inputs, volume adjustment, bass/treble tones, balance or even intensity. The remote control activating these functions remotely. The X-P700 is really very complete: nine analog inputs, one of which is balanced, and one MM/MC phono. Digital side: two optical inputs, one coaxial input, one USB-B (Xmos) and one USB-A. The DAC is the powerful Burr Brown PCM 1796 -24 bit/192 kHz converter. On the output side, the X-P700 offers an RCA lined with a balanced XLR, plus a high pass output and two for the sub. Headphone enthusiasts are pampered: two inputs on the front (6.35 and 3.5 jack) plus a double independent gain adjustment below +6, 0, -4 dB and output impedance 0 or 100 ohms. The X-P700 is very seriously built, starting with the understated 10mm black methacrylate front panel, common to the Classic Line. But the inside is more telling: two high-capacity toroidal transformers feed filtered and regulated dual-mono power to the motherboard, which also contains the preamp stages. The quality of the adjustable MC high and low level phono stage, as well as the MM capacity is remarkable for this budget, hard to imagine better. In summary, at the price at which the new X-P700 is offered, it is difficult to offer better. This is what we wanted from the start of the development of this new preamplifier. We didn’t skimp on the quality of components, decoding or power, the kind of attention that counts when listening. The X-P700 is the ideal preamplifier, it can be associated with our range of power amplifiers such as the famous X-A160 (or EVO), X-A220 (or EVO), BX2 or the new X-A600 or any other Audiophile grade power amplifier. Good listening. Discover !
Add to compare
Quick view
Add to wishlist

ADVANCE PARIS X-P700

,
1,390.00€
Προσθήκη στο καλάθι

ADVANCE PARIS X-P700

ADVANCE PARIS X-P700The affordable high-end preamp Succeeding the X-P500, the X-P700 offers technical refinements rarely encountered in this range: dual mono design and the most direct signal processing possible (Direct Path). Supreme refinement, it is possible to choose between two output schemes: the class A mode using bipolars in double cascade assembly, close to a tube gradient, and the discrete mode, based on a JFet differential and current mirror in the bipolar, polarized in class AB, more traditional. Its design is very sober and refined, a single rotary knob is present with a push button to validate the choices: access to inputs, volume adjustment, bass/treble tones, balance or even intensity. The remote control activating these functions remotely. The X-P700 is really very complete: nine analog inputs, one of which is balanced, and one MM/MC phono. Digital side: two optical inputs, one coaxial input, one USB-B (Xmos) and one USB-A. The DAC is the powerful Burr Brown PCM 1796 -24 bit/192 kHz converter. On the output side, the X-P700 offers an RCA lined with a balanced XLR, plus a high pass output and two for the sub. Headphone enthusiasts are pampered: two inputs on the front (6.35 and 3.5 jack) plus a double independent gain adjustment below +6, 0, -4 dB and output impedance 0 or 100 ohms. The X-P700 is very seriously built, starting with the understated 10mm black methacrylate front panel, common to the Classic Line. But the inside is more telling: two high-capacity toroidal transformers feed filtered and regulated dual-mono power to the motherboard, which also contains the preamp stages. The quality of the adjustable MC high and low level phono stage, as well as the MM capacity is remarkable for this budget, hard to imagine better. In summary, at the price at which the new X-P700 is offered, it is difficult to offer better. This is what we wanted from the start of the development of this new preamplifier. We didn’t skimp on the quality of components, decoding or power, the kind of attention that counts when listening. The X-P700 is the ideal preamplifier, it can be associated with our range of power amplifiers such as the famous X-A160 (or EVO), X-A220 (or EVO), BX2 or the new X-A600 or any other Audiophile grade power amplifier. Good listening. Discover !

ADVANCE PARIS X-P700

Marantz PM-10 Reference Marantz PM-10 Reference Integrated Stereo Amplifier with 200W and Custom HDAM This reference stereo integrated amplifier is the product of expertise developed over decades of research, testing, and critical listening for the best possible reproduction of music. Classic Design 2.2 Channels 200 Watts Per Channel Custom HDAM 5 Year Warranty
Add to compare
Quick view
Add to wishlist

Marantz PM-10 Reference

,
9,999.00€
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Marantz PM-10 Reference

Marantz PM-10 ReferenceMarantz PM-10 Reference Integrated Stereo Amplifier with 200W and Custom HDAM This reference stereo integrated amplifier is the product of expertise developed over decades of research, testing, and critical listening for the best possible reproduction of music. Classic Design 2.2 Channels 200 Watts Per Channel Custom HDAM 5 Year Warranty

Marantz PM-10 Reference

GoldNote CD-5 The Pinnacle of CD Playback Excellence Experience unparalleled audio fidelity with the CD-5, the definitive choice for discerning audiophiles. Featuring a state-of-the-art high-precision CD mechanism and a high-resolution D/A converter, the CD-5 ensures an impeccable reproduction of every nuance in your music collection. Crafted with meticulous attention to detail, the CD-5’s mechanical chassis and audio circuits are designed to deliver the highest sound quality. By employing select audio-grade components and an analogue signal path design, this masterpiece eliminates noise and intermodulation, ensuring a pure and immersive listening experience. Navigating your music is a breeze with the intuitive touchscreen display and included remote control. The CD-5 offers both analogue and digital outputs in a fully balanced configuration, providing versatile connectivity options for your high-end audio setup. Elevate your audio experience further by pairing the CD-5 with the optional PSU-10 EVO external power supply. This upgrade enhances dynamic range and reveals even finer details in your favorite tracks, taking your listening enjoyment to new heights. Indulge in the ultimate musical pleasure with the CD-5, where precision engineering meets unparalleled performance.
Add to compare
Quick view
Add to wishlist

GoldNote CD-5

,
1,290.00€
Προσθήκη στο καλάθι

GoldNote CD-5

GoldNote CD-5The Pinnacle of CD Playback Excellence Experience unparalleled audio fidelity with the CD-5, the definitive choice for discerning audiophiles. Featuring a state-of-the-art high-precision CD mechanism and a high-resolution D/A converter, the CD-5 ensures an impeccable reproduction of every nuance in your music collection. Crafted with meticulous attention to detail, the CD-5’s mechanical chassis and audio circuits are designed to deliver the highest sound quality. By employing select audio-grade components and an analogue signal path design, this masterpiece eliminates noise and intermodulation, ensuring a pure and immersive listening experience. Navigating your music is a breeze with the intuitive touchscreen display and included remote control. The CD-5 offers both analogue and digital outputs in a fully balanced configuration, providing versatile connectivity options for your high-end audio setup. Elevate your audio experience further by pairing the CD-5 with the optional PSU-10 EVO external power supply. This upgrade enhances dynamic range and reveals even finer details in your favorite tracks, taking your listening enjoyment to new heights. Indulge in the ultimate musical pleasure with the CD-5, where precision engineering meets unparalleled performance.

GoldNote CD-5

 
Marantz CINEMA 40 Premium 9.4 A reference-level AV Receiver, CINEMA 40 is a statement piece engineered with the latest immersive audio formats poised to deliver rich, spacious, and enveloping Marantz sound. Crafted in Shirakawa, Japan 9.4 Channels 125 Watts per Channel 7 HDMI Inputs plus eARC 8K & Dolby Atmos HEOS Built-in 5 Year Warranty Built upon decades of rich heritage, designed with timeless style, and engineered for utmost performance, Marantz CINEMA Series are the foundation of the world's most demanding home theaters. A modern expression of timeless design principles, CINEMA 40 features the iconic Marantz porthole, premium materials, and subtle sidelights that illuminate the front panel. Immersive spaciousness, warm and rich tone, extraordinary detail and lifelike dynamics are legendary hallmarks of Marantz sound. The Marantz Sound Master meticulously tuned CINEMA 40 for amazing performance with careful parts selection to create the Most Musical Sound in your home. CINEMA 40 comes complete with the latest immersive audio formats, 8K video, room optimization, streaming, and more technology to simplify and elevate your enjoyment.
Add to compare
Quick view
Add to wishlist

Marantz CINEMA 40 Premium 9.4

,
2,949.00€
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Marantz CINEMA 40 Premium 9.4

Marantz CINEMA 40 Premium 9.4 A reference-level AV Receiver, CINEMA 40 is a statement piece engineered with the latest immersive audio formats poised to deliver rich, spacious, and enveloping Marantz sound. Crafted in Shirakawa, Japan 9.4 Channels 125 Watts per Channel 7 HDMI Inputs plus eARC 8K & Dolby Atmos HEOS Built-in 5 Year Warranty Built upon decades of rich heritage, designed with timeless style, and engineered for utmost performance, Marantz CINEMA Series are the foundation of the world's most demanding home theaters. A modern expression of timeless design principles, CINEMA 40 features the iconic Marantz porthole, premium materials, and subtle sidelights that illuminate the front panel. Immersive spaciousness, warm and rich tone, extraordinary detail and lifelike dynamics are legendary hallmarks of Marantz sound. The Marantz Sound Master meticulously tuned CINEMA 40 for amazing performance with careful parts selection to create the Most Musical Sound in your home. CINEMA 40 comes complete with the latest immersive audio formats, 8K video, room optimization, streaming, and more technology to simplify and elevate your enjoyment.

Marantz CINEMA 40 Premium 9.4

Marantz CINEMA 50 Premium 9.4 CINEMA 50 Equipped with the latest immersive audio formats, CINEMA 50 is equally ideal for a dedicated home theater space or multi-use living room. Its thoughtfully selected connectivity options, flexible speaker arrangement, and fine-tuning ability allow you to make CINEMA 50 your own. Artisinal Design 9.4 Channels 110 Watts per Channel 6 HDMI Inputs plus eARC 8K & Dolby Atmos HEOS Built-in 5 Year Warranty Built upon decades of rich heritage, designed with timeless style, and engineered for utmost performance, Marantz CINEMA Series are the foundation of the world's most demanding home theaters. A modern expression of timeless design principles, CINEMA 50 features the iconic Marantz porthole, symmetrical design, and front panel controls elegantly hidden from view. Immersive spaciousness, warm and rich tone, extraordinary detail and lifelike dynamics are legendary hallmarks of Marantz sound. The Marantz Sound Master meticulously tuned CINEMA 50 for amazing performance with our proprietary HDAM amplification circuitry to create the Most Musical Sound in your home. CINEMA 50 comes complete with the latest immersive audio formats, 8K video, room optimization, streaming, and more technology to simplify and elevate your enjoyment.
Add to compare
Quick view
Add to wishlist

Marantz CINEMA 50 Premium 9.4

,
2,099.00€
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Marantz CINEMA 50 Premium 9.4

Marantz CINEMA 50 Premium 9.4 CINEMA 50 Equipped with the latest immersive audio formats, CINEMA 50 is equally ideal for a dedicated home theater space or multi-use living room. Its thoughtfully selected connectivity options, flexible speaker arrangement, and fine-tuning ability allow you to make CINEMA 50 your own. Artisinal Design 9.4 Channels 110 Watts per Channel 6 HDMI Inputs plus eARC 8K & Dolby Atmos HEOS Built-in 5 Year Warranty Built upon decades of rich heritage, designed with timeless style, and engineered for utmost performance, Marantz CINEMA Series are the foundation of the world's most demanding home theaters. A modern expression of timeless design principles, CINEMA 50 features the iconic Marantz porthole, symmetrical design, and front panel controls elegantly hidden from view. Immersive spaciousness, warm and rich tone, extraordinary detail and lifelike dynamics are legendary hallmarks of Marantz sound. The Marantz Sound Master meticulously tuned CINEMA 50 for amazing performance with our proprietary HDAM amplification circuitry to create the Most Musical Sound in your home. CINEMA 50 comes complete with the latest immersive audio formats, 8K video, room optimization, streaming, and more technology to simplify and elevate your enjoyment.

Marantz CINEMA 50 Premium 9.4