Audio-Technica AT-OC9XSL

Περιγραφή

Audio-Technica AT-OC9XSL

Η κεφαλή Audio-Technica AT-OC9XSL είναι κεφαλή κινητού πηνίου -mc- με βελόνα Nude rectangular shank, boron cantilever και 0.4 mV έξοδο, διαχωρισμό καναλιών 28 dB (1 kHz) και απόκριση συχνότητας 20 – 50,000 Hz.

• Overview AT-OC9XSL
  The AT-OC9XSL Dual Moving Coil cartridge with special line contact stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion. Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and premium permendur yoke that dramatically increase the magnetic energy, and the nude special line contact stylus on a boron cantilever that tracks the record groove with ultimate accuracy, delivering rich, full-range audio and high transient response. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.
• Features
  The AT-OC9XSL Dual Moving Coil cartridge with special line contact stylus is designed to provide outstanding channel separation. The Pure Copper by Ohno Continuous Casting (PCOCC) coils ensure pure audio transmission and are aligned in a reverse V-shaped formation to exert less pressure on the stylus, thereby minimizing distortion. Audio quality is further enhanced by a rigid aluminum body that reduces resonance, a neodymium magnet and premium permendur yoke that dramatically increase the magnetic energy, and the nude special line contact stylus on a boron cantilever that tracks the record groove with ultimate accuracy, delivering rich, full-range audio and high transient response. The cartridge body has been pre-threaded, enabling it to be mounted to a headshell or integral tonearm with just two screws – no nuts required.
• Specifications Cartridge & Stylus
  Frequency Response 20 – 50,000 Hz
  Channel Separation 28 dB (1 kHz)
  Vertical Tracking Angle 20 degrees
  Vertical Tracking Force 1.8 to 2.2 g (standard 2.0 g)
  Stylus Construction Nude rectangular shank
  Recommended Load Impedance Min 100 Ohms
  Coil Impedance 12 Ohms (1 kHz)
  DC Resistance 12 Ohms
  Coil Inductance 25 μH (1 kHz)
  Output Voltage 0.4 mV (@ 1 kHz, 5 cm/sec)
  Output Channel Balance 0.5 dB (1 kHz)
  Stylus Shape Special Line Contact
  Cantilever 0.28 mm Ø nude boron
  Static Compliance 22 x 10 – 6 cm / dyne
  Dynamic Compliance 18 x 10 – 6 cm / dyne (100 Hz)
  Mounting 1/2” centers / Threaded inserts
  Cartridge Weight 7.6 g
  Dimensions 17.3 (H) x 16.8 (W) x 25.7 (L) mm
  Accessories Included 1 non magnetic screw driver
  1 brush
  2 washers
  4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm
  1 plastic protector
  Body Material Aluminium
  Model AT-OC9XSL
  Stylus Size 1.5 x 0.28 mil
  Terminal Pins Brass
  Wire Used for Coil PCOCC (Copper by Ohno Continuous Casting process.)

Δείτε εδώ όλα τα προιόντα μας

Audio-Technica AT-OC9XSL