Show sidebar
Show 24 48 64
Filters
Audio Note Meishu Tonmeister Line S.E As with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.
Add to compare
Quick view
Add to wishlist

Audio Note Meishu Tonmeister Line 300B SE Silver Edition

,
€16,440.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Audio Note Meishu Tonmeister Line S.E

Audio Note Meishu Tonmeister Line S.E As with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.

Audio Note Meishu Tonmeister Line S.E ολοκληρωμένος ενισχυτής SET με 300B

JADIS SE300B Description The SE300B supplies a power of 10W RMS and functions in pure class-A with single-ended mounting (the two tubes are in parallel) with an automatic bias. The two high voltages, driver and power, have vacuum-tube power supplies. The bandwidth (at –3dB) is from 20Hz to 20kHz, without any feedback. The driver stage, powered at 400V, is built around a double-triode 6SN7. The two elements of the tube are mounted in cascade. The output stage is powered at 320V, which allows the tubes to work in the best conditions.
Add to compare
Quick view
Add to wishlist

JADIS SE300B

,
€15,700.00
Προσθήκη στο καλάθι

JADIS SE300B

JADIS SE300BDescription The SE300B supplies a power of 10W RMS and functions in pure class-A with single-ended mounting (the two tubes are in parallel) with an automatic bias. The two high voltages, driver and power, have vacuum-tube power supplies. The bandwidth (at –3dB) is from 20Hz to 20kHz, without any feedback. The driver stage, powered at 400V, is built around a double-triode 6SN7. The two elements of the tube are mounted in cascade. The output stage is powered at 320V, which allows the tubes to work in the best conditions.

JADIS SE300B

Audio Note Meishu Tonmeister phono As with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.
Add to compare
Quick view
Add to wishlist

Audio Note MEISHU Tonmeister phono 300B SE

,
€15,680.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Audio Note Meishu Tonmeister phono

Audio Note Meishu Tonmeister phonoAs with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.

Audio Note Meishu Tonmeister phono, ολοκληρωμένος ενισχυτής Single Ended 300b με phono stage

KONDO GE-1
Add to compare
Quick view
Add to wishlist

KONDO GE-1

,
€15,500.00
Προσθήκη στο καλάθι

KONDO GE-1

KONDO GE-1

KONDO GE-1

JADIS I300
Add to compare
Quick view
Add to wishlist

JADIS I300

,
€15,490.00
Προσθήκη στο καλάθι

JADIS I300

JADIS I300

JADIS I300

JADIS JA30 MKII
Add to compare
Quick view
Add to wishlist

JADIS JA30 MKII

,
€14,470.00 – €15,320.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

JADIS JA30 MKII

JADIS JA30 MKII

JADIS JA30 MKII

Classe Delta Stereo Amplifier Το Delta STEREO αποστάζει όλη την καινοτομία και τη γνώση της Classé σε έναν συμπαγή στερεοφωνικό ενισχυτή υψηλής απόδοσης. Classe Delta Stereo Amplifier The Delta STEREO distills all of Classé's innovation and knowledge into a compact high-performance stereo amplifier. In situations where dual mono amplifiers can't be accommodated, Delta STEREO offers uncompromizing performance in a single component.
Add to compare
Quick view
Add to wishlist

Classe Delta Stereo Amplifier

,
€15,000.00
Προσθήκη στο καλάθι

Classe Delta Stereo Amplifier

Classe Delta Stereo AmplifierΤο Delta STEREO αποστάζει όλη την καινοτομία και τη γνώση της Classé σε έναν συμπαγή στερεοφωνικό ενισχυτή υψηλής απόδοσης. Classe Delta Stereo Amplifier The Delta STEREO distills all of Classé's innovation and knowledge into a compact high-performance stereo amplifier. In situations where dual mono amplifiers can't be accommodated, Delta STEREO offers uncompromizing performance in a single component.

Classe Delta Stereo Amplifier

-5%
BRYSTON 14B Cubed
Add to compare
Quick view
Add to wishlist

BRYSTON 14B Cubed

,
Original price was: €15,500.00.Η τρέχουσα τιμή είναι: €14,770.00.
Προσθήκη στο καλάθι

BRYSTON 14B Cubed

BRYSTON 14B Cubed

BRYSTON 14B Cubed

Zesto Audio Leto Ultra II
Add to compare
Quick view
Add to wishlist

Zesto Audio Leto Ultra II Preamp

€14,750.00
Προσθήκη στο καλάθι

Zesto Audio Leto Ultra II Preamp

Zesto Audio - Leto Ultra II Preamplifier
Zesto Audio Leto Ultra II

Zesto Audio Leto Ultra II

JADIS I70
Add to compare
Quick view
Add to wishlist

JADIS I70

,
€14,470.00
Προσθήκη στο καλάθι

JADIS I70

JADIS I70

JADIS I70

Sold out
Electrocompaniet AW 400 Reference MONO
Add to compare
Quick view
Add to wishlist

Electrocompaniet AW 400 Reference MONO

,
€13,998.00
Διαβάστε περισσότερα

Electrocompaniet AW 400 Reference MONO

Oι μονομπλόκ Electrocompaniet AW 400 Reference MONO είναι ένας τελικοί ενισχυτές ισχύος γνωστοί για τον αχρωμάτιστο ήχο τους και τις εξαιρετικές δυνατότητες οδήγησης. Οι Electrocompaniet AW 400 Reference MONO αποδίδουν 1 x 400 WRMS στα 8Ω, 1 x 765 WRMS στα 4Ω, 1 x 1010 WRMS στα 2Ω. Αποδίδουν ρεύμα κορυφής μεγαλύτερο από 150A έχει Damping Factor μεγαλύτερο από 500, λειτουργούν σε τάξη A, ενώ έχουν δυνατότητα οδήγησης φορτίων έως και 0,5Ω.
Electrocompaniet AW 400 Reference MONO

Electrocompaniet AW 400 Reference MONO

-8%
BRYSTON 21B³
Add to compare
Quick view
Add to wishlist

BRYSTON 21B³

,
Original price was: €15,180.00.Η τρέχουσα τιμή είναι: €13,900.00.
Προσθήκη στο καλάθι

BRYSTON 21B³

BRYSTON 21B³

BRYSTON 21B³

JADIS JP30MC MKIII preamplifier
Add to compare
Quick view
Add to wishlist

JADIS JP30MC MKIII preamplifier

,
€13,790.00
Προσθήκη στο καλάθι

JADIS JP30MC MKIII preamplifier

JADIS JP30MC MKIII preamplifier

JADIS JP30MC MKIII preamplifier

ELECTROCOMPANIET AW 300 M The AW 300 M is Electrocompaniet’s latest Mono Power Amplifier. This amplifier embodies an updated, yet unmistakable Electrocompaniet design, perfectly complementing both current and legacy Electrocompaniet products.
Add to compare
Quick view
Add to wishlist

ELECTROCOMPANIET AW 300 M

,
€13,400.00
Προσθήκη στο καλάθι

ELECTROCOMPANIET AW 300 M

ELECTROCOMPANIET AW 300 MThe AW 300 M is Electrocompaniet’s latest Mono Power Amplifier. This amplifier embodies an updated, yet unmistakable Electrocompaniet design, perfectly complementing both current and legacy Electrocompaniet products.

ELECTROCOMPANIET AW 300 M μονοφωνικοί τελικοί ενισχυτές

BRYSTON 875HT 8 Ch
Add to compare
Quick view
Add to wishlist

BRYSTON 875HT 8 Ch

,
€13,250.00
Προσθήκη στο καλάθι

BRYSTON 875HT 8 Ch

BRYSTON 875HT 8 Ch

BRYSTON 875HT 8 Ch

Classe Delta Mono Amplifier POWER AMPLIFIER Delta MONO embodies exquisite, controlled, unending power. A perfectly detailed enclosure cradles a highly innovative blend of technologies and hand-selected components which deliver effortless, refined sound.
Add to compare
Quick view
Add to wishlist

Classe Delta Mono Amplifier

,
€13,000.00
Προσθήκη στο καλάθι

Classe Delta Mono Amplifier

Classe Delta Mono AmplifierPOWER AMPLIFIER Delta MONO embodies exquisite, controlled, unending power. A perfectly detailed enclosure cradles a highly innovative blend of technologies and hand-selected components which deliver effortless, refined sound.

Classe Delta Mono Amplifier

-10%
GRANDINOTE Solo Integrated We are proud to introduce a new product that is the result of a long period of design and development. The new integrated amplifier Solo. We have concentrated years of experience in HiFi development into this new creation. Everything is improved not only the audio quality and the power (now 60W in class A) but even a new design with a huge 9” display full of functions like VUmeter, spectrum analyser and more. Grandinote is technology, innovation, flexibility, design and absolute audio quality. MAGNETOSOLID TECHNOLOGY Magnetosolid is a unique technology from Grandinote, designed by engineer Massimiliano Magri and a great expression of Made in Italy. Created in 2002 in its first versions, it integrates two words in its name: Magneto and Solid. Magneto because of its ferromagnetic components and output transformers and Solid because of its solid-state components. It is a circuit that brings the best of tubes and solid-state technology to our amplifiers. As with tube systems, the circuit is as simple and straightforward as possible, but with all the qualities of solid state. The main advantage of tubes over solid state, is the absence of parasitic capacitance. Our Magnetosolid technology, has overcome even this obstacle by delivering a sound that is absolutely faithful to the source without the loss of any detail and with the ability to control any speaker. The frequency response of Magnetosolid amplifiers is the best on the market, superior to either tube or solid-state systems. All components of the sound message are in place. Detail, presence, full dynamic and control thanks also to an absolute reference damping factor. In the Solo and in the new Grandinote Magnetosolid amplifiers the audio circuit has been further improved compared to previous ones such as the Shinai, with voltages and polarizations even richer and oversized. An increase of over 50% going from 60V to 96V while maintaining the purity of the signal unchanged. POWER SUPPLY Grandinote's new Magnetosolid amplifiers are now equipped with a new switching power supply with electro-medical rigor standards and a new concept. All circuits are pure class A with an always constant current. The absorption does not depend on the signal and this means that the power supply will always supply the same current. It is very important to underline that our switching power supplies never modulate the current based on the signal. The development of our new switching power supplies has broken down the paradigm of toroidal as the only solution. With our design they are now qualitatively on par with toroidals and perfectly integrated with Grandinote's Magnetosolid circuits in pure class A. With our new power supply, we are able to choose the supply voltages for the output stages and able to select the Solo polarization in function of the nominal impedance speakers. Solo is now optimised for 8, or 4 Ohm speakers, avoiding unnecessary power losses and with a greater overall performance. We have also increased the size of the heatsinks, now they are a 10% bigger than in the old Shinai and that allows the Solo to deliver more power while heating up less and be more comfortable to use in hot seasons. VOLUME CONTROL Now we have resistors combined with reed relays. Reed relays are the best contact in existence cause they works in vacuum, no impurities, no parasitic capacitances like in solid-state relays and guarantee the passage of every smallest nuance of the signal, without limiting its frequency response, without any distortion! The configuration of these resistors is a pure “ladder" with two blocks of resistors, only in parallel with each other. This configuration use the same principle of the volume regulators with rotary switches, studded with resistors, but with 2 big improvements: No rotary switch in the world has the same contact quality as a reed relay (vacuum) - these switches have few steps, a far cry from the 68 steps + 0 of our regulator. The Shinai has only 33 steps plus 0.
Add to compare
Quick view
Add to wishlist

GRANDINOTE Solo Integrated

,
Original price was: €14,400.00.Η τρέχουσα τιμή είναι: €12,960.00.
Προσθήκη στο καλάθι

GRANDINOTE Solo Integrated

GRANDINOTE Solo Integrated We are proud to introduce a new product that is the result of a long period of design and development. The new integrated amplifier Solo. We have concentrated years of experience in HiFi development into this new creation. Everything is improved not only the audio quality and the power (now 60W in class A) but even a new design with a huge 9” display full of functions like VUmeter, spectrum analyser and more. Grandinote is technology, innovation, flexibility, design and absolute audio quality. MAGNETOSOLID TECHNOLOGY Magnetosolid is a unique technology from Grandinote, designed by engineer Massimiliano Magri and a great expression of Made in Italy. Created in 2002 in its first versions, it integrates two words in its name: Magneto and Solid. Magneto because of its ferromagnetic components and output transformers and Solid because of its solid-state components. It is a circuit that brings the best of tubes and solid-state technology to our amplifiers. As with tube systems, the circuit is as simple and straightforward as possible, but with all the qualities of solid state. The main advantage of tubes over solid state, is the absence of parasitic capacitance. Our Magnetosolid technology, has overcome even this obstacle by delivering a sound that is absolutely faithful to the source without the loss of any detail and with the ability to control any speaker. The frequency response of Magnetosolid amplifiers is the best on the market, superior to either tube or solid-state systems. All components of the sound message are in place. Detail, presence, full dynamic and control thanks also to an absolute reference damping factor. In the Solo and in the new Grandinote Magnetosolid amplifiers the audio circuit has been further improved compared to previous ones such as the Shinai, with voltages and polarizations even richer and oversized. An increase of over 50% going from 60V to 96V while maintaining the purity of the signal unchanged. POWER SUPPLY Grandinote's new Magnetosolid amplifiers are now equipped with a new switching power supply with electro-medical rigor standards and a new concept. All circuits are pure class A with an always constant current. The absorption does not depend on the signal and this means that the power supply will always supply the same current. It is very important to underline that our switching power supplies never modulate the current based on the signal. The development of our new switching power supplies has broken down the paradigm of toroidal as the only solution. With our design they are now qualitatively on par with toroidals and perfectly integrated with Grandinote's Magnetosolid circuits in pure class A. With our new power supply, we are able to choose the supply voltages for the output stages and able to select the Solo polarization in function of the nominal impedance speakers. Solo is now optimised for 8, or 4 Ohm speakers, avoiding unnecessary power losses and with a greater overall performance. We have also increased the size of the heatsinks, now they are a 10% bigger than in the old Shinai and that allows the Solo to deliver more power while heating up less and be more comfortable to use in hot seasons. VOLUME CONTROL Now we have resistors combined with reed relays. Reed relays are the best contact in existence cause they works in vacuum, no impurities, no parasitic capacitances like in solid-state relays and guarantee the passage of every smallest nuance of the signal, without limiting its frequency response, without any distortion! The configuration of these resistors is a pure “ladder" with two blocks of resistors, only in parallel with each other. This configuration use the same principle of the volume regulators with rotary switches, studded with resistors, but with 2 big improvements: No rotary switch in the world has the same contact quality as a reed relay (vacuum) - these switches have few steps, a far cry from the 68 steps + 0 of our regulator. The Shinai has only 33 steps plus 0.

GRANDINOTE Solo Integrated

Είμαστε περήφανοι που παρουσιάζουμε ένα νέο προϊόν που είναι αποτέλεσμα μακράς περιόδου σχεδιασμού και ανάπτυξης. Ο νέος ολοκληρωμένος ενισχυτής Solo. Έχουμε συγκεντρώσει την πολυετή εμπειρία στην ανάπτυξη HiFi σε αυτή τη νέα δημιουργία. Όλα είναι βελτιωμένα όχι μόνο στην ποιότητα του ήχου και την ισχύ (τώρα 60W σε τάξη Α), αλλά ακόμη και σε μια νέα σχεδίαση με μια τεράστια οθόνη 9" γεμάτη λειτουργίες όπως VUmeter, αναλυτής φάσματος και πολλά άλλα. Το όνομα Grandinote σημαίνει τεχνολογία, καινοτομία, ευελιξία, σχεδιασμός και απόλυτη ποιότητα ήχου.

JADIS JPL MKII preamplifier
Add to compare
Quick view
Add to wishlist

JADIS JPL MKII preamplifier

,
€11,240.00 – €12,890.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

JADIS JPL MKII preamplifier

JADIS JPL MKII preamplifier

JADIS JPL MKII preamplifier

-8%
BRYSTON 9B³ multichannel
Add to compare
Quick view
Add to wishlist

BRYSTON 9B³ multichannel

,
€10,480.00 – €12,880.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

BRYSTON 9B³ multichannel

BRYSTON 9B³ multichannel

BRYSTON 9B³ multichannel

Emillé Labs KI-270W
Add to compare
Quick view
Add to wishlist

Emillé Labs KI-270W

,
€12,880.00
Προσθήκη στο καλάθι

Emillé Labs KI-270W

Emillé Labs KI-270W, ένας εξαιρετικός ολοκληρωμένος ενισχυτής από την EMILLE.  O KI-270W διαθέτει περίσσεια ρεύματος με τα 2x70 Watt στα 8/4ohm. Σε τοπολογία Push-Pull με 2 λυχνίες εξόδου 6550 ανά κανάλι ο ενισχυτής είναι ικανός να οδηγήσει ακόμα και δύσκολα ηχεία. Επιπλέον ο Emille KI-270W δέχεται και λυχνίες εξόδου KT-120 αυξάνοντας την ισχύ του στα 2x90 Watt.

Ο Emille KI-270W διαθέτει εξωτερική ρύθμιση ΒΙΑS με τα όργανα να βρίσκονται στο μπροστινό πάνελ. Ο ενισχυτής έχει μοναδική ποιότητα κατασκευής και design και φιλοξενείτε σε ένα εξαιρετικό case αλουμινίου με πολύ υψηλό WAF, ενώ η μελετημένη κατασκευή του case βοηθά τον EMILLE να δουλεύει σε πολύ χαμηλές θερμοκρασίες χωρίς μεταβολή της απόδοσης του για πολλές ώρες λειτουργίας. Ο KI-270W ξεπερνάει σε απόδοση πολλά σετ προ-τελικών υπερδιπλάσιας άξιας. Έχει χειροποίητους μετασχηματιστές έξοδου με πυρήνα Μ-6, είναι dual-mono κατασκευή και διαθέτει ένα ιδανικό Phase –Splitter. Όλα αυτά ανεβάζουν κάθετα την ποιότητα ήχου κάνοντας τον KI-270W να συναγωνίζεται άμεσα τους Single-Ended ενισχυτές στην φυσικότητα στα μεσαία, χωρίς να έχει τα ελαττώματα τους στα άκρα του ηχητικού φάσματος και την ανεπαρκή οδήγηση των ηχείων. Η ποιότητα ήχου του είναι φυσική και γραμμική από το πρώτο 0,1 Watt έως την μέγιστη ισχύ του.
Emillé Labs KI-270W

Emillé Labs KI-270W

Jadis I50
Add to compare
Quick view
Add to wishlist

JADIS I50

,
€12,770.00
Προσθήκη στο καλάθι

JADIS I50

Jadis I50

Jadis I50

Audio Note Meishu Tonmeister Line As with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.
Add to compare
Quick view
Add to wishlist

Audio Note MEISHU TONMEISTER 300B SE Line

,
€12,470.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

Audio NOTE MEISHU TONMEISTER  300B SE Line

Audio Note Meishu Tonmeister LineAs with what we learned developing the 211 amplifiers, each element in a circuit is like each lens in a microscope, and has to be perfectly chosen and formed to correctly work with the proceeding and following lenses (or stages in the amplifier circuit). If the lenses in a microscope are not correctly chosen and adjusted, the image becomes blurred, and detail and information is lost. The same is true for an amplifier circuit; if each stage is not absolutely correctly chosen and matched to work optimally with the rest of the amplifier, the result will be blurred, unfocused, uneven sound lacking in information. So to create a better amplifier, the natural idea was to simplify the circuit and optimise every element, so the combination works seamlessly and harmoniously together. This is exactly what we have done with the MEISHU Tonmeister. The new PSU uses only one mains transformer, one 5U4 rectifier valve and one choke. When this arrangement is optimised, it works extremely well, producing a very homogeneous and ‘complete’ sound. The input and driver stage is very similar to that found in the JINRO, TOMEI and ONGAKU, with a 12AU7 and 5687 driving an in-house designed and manufactured inter-stage transformer for the best energy transfer, evenness and authority. This is the most important, fundamental upgrade over the original design. The output transformers for the new MEISHU were designed specifically for the project by Andy Grove, and it is not an overstatement to say that they are superb. The circuit is now a beautiful example of elegant simplification, something that could only be realised thanks to our ability to create extremely closely matched transformers in-house, and having our own supply of custom resistors, in-house made foil capacitors and custom made electrolytic capacitors. These allow us to exert extremely tight control over the performance and voicing of the complete amplifier from input to output, something that is simply beyond the possibilities of manufacturers who have to rely on 'off the shelf' components. The result is an amplifier that maintains the legendary Audio Note musicality, midrange magic and glorious tonal colour of the original MEISHU, whilst bringing new and previously unheard levels of information retrieval and dynamic expression, redefining what is usually expected of a 300B SET amplifier.

Audio Note Meishu Tonmeister Line Single Ended class A integraed tube amp with 300b

Musical Fidelity Nu-Vista 800.2
Musical Fidelity Nu-Vista 800.2
Add to compare
Quick view
Add to wishlist

Musical Fidelity Nu-Vista 800.2

,
€12,400.00
Προσθήκη στο καλάθι

Musical Fidelity Nu-Vista 800.2

Ο Nu-Vista 800 ήταν ένας ένας ολοκληρωμένος ενισχυτής ο οποίος πήρε πολύ μεγάλη αναγνώριση από κοινό και κριτικούς. Δυστυχώς πολλά από τα αρχικά υλικά που χρησιμοποιούνταν στο κύκλωμα του σταμάτησαν να υπάρχουν στην αγορά π.χ το ορίτζιναλ ρετρό display του σταμάτησε να παράγεται!! Ετσι η εταιρεία έμεινε με τις εξής δυο επιλογές είτε να σταματήσει ένα άκρως εμπορικό και αγαπημένο μηχάνημα στην αγορά ή αντικαταστήσει αναβαθμίζοντας το παλιό μοντέλο. Η Musical Fidelity κατέληξε στην δεύτερη επιλογή και έτσι δημιουργήθηκε ο .2 πιστός στην αρχική φόρμουλα όσο ήταν δυνατό.

Musical Fidelity Nu-Vista 800.2 In Brief A work of audio art using our incredible Nu-Vista circuitry with 300WPC+ Redesigned front panel with new display Rewound transformer for less noise Revised power supply circuits Remote on/standby Locally decoupled output stage taken from the TITAN power amp Total stability margin, will drive any loudspeaker with ease Cutting edge technical performance with the magic of Nu-Vistors Dual mono power amps with separate preamp Five versatile inputs - Balanced XLR, CD, Tuner, 2 x Auxiliary Both fixed line and variable pre outputs Home Theatre bypass Superb design, Heroic build quality

Musical Fidelity Nu-Vista 800.2

Musical Fidelity Nu-Vista 800.2

JADIS DA-50 Signature
Add to compare
Quick view
Add to wishlist

JADIS DA-50 Signature

,
€11,590.00 – €12,140.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

JADIS DA-50 Signature

JADIS DA-50 Signature

JADIS DA-50 Signature