Elac Miracord 50 Turntable

Περιγραφή

Elac Miracord 50 Turntable

Elac Miracord 50 Turntable

• Η πλούσια ιστορία της ELAC στον σχεδιασμό και την κατασκευή πικάπ ξεκίνησε τη δεκαετία του 1950 με το Miracord 10H, ένα πρωτοποριακό μοντέλο που έθεσε τα πρότυπα για αναπαραγωγή ήχου υψηλής πιστότητας. Το Miracord 10H εγκωμιάστηκε για τον καινοτόμο σχεδιασμό του και την ανώτερη απόδοσή του, και γρήγορα έγινε αγαπημένο μεταξύ των ηχοφίλων.
• Σήμερα, η ELAC είναι περήφανη που προσφέρει μια νέα γενιά πικάπ Miracord, τα οποία συνδυάζουν την κλασική σχεδίαση με την τεχνολογία αιχμής. Τα πικάπ Miracord έχουν σχεδιαστεί για να προσφέρουν εξαιρετική ποιότητα ήχου και απόδοση και είναι βέβαιο ότι θα ευχαριστήσουν ακόμα και τους πιο απαιτητικούς ακροατές.
• Το πικάπ Miracord 50 αποτελεί απόδειξη της ακλόνητης δέσμευσης της ELAC στη μηχανική ακριβείας και το πάθος για τη μουσική που ξεπερνά το χρόνο. Συνδυάζει άψογα την τεχνολογία αιχμής με τη διαχρονική γοητεία του βινυλίου, παρέχοντας στους ηχοφίλους και στους λάτρεις της μουσικής ένα συναρπαστικό ταξίδι στην καρδιά των αγαπημένων τους μελωδιών. Το πικάπ έρχεται με ενσωματωμένο προενισχυτή κεφαλής και προεγκατεστημένη Audio-Technica AT91 (moving magnet) έτοιμο να παίξει τα αγαπημένα σας βινύλια.
• Miracord 50 Turntable
  The Miracord 50 Turntable is a testament to ELAC’s unwavering commitment to precision engineering and a passion for music that transcends time. It seamlessly blends cutting-edge technology with the timeless appeal of vinyl, providing audiophiles and music enthusiasts alike with an immersive journey into the heart of their favorite tunes.
• ANTI-RESONANCE CHASSIS
  Superior isolation is achieved with a chassis designed to minimize the sonic effects of vibration and feedback. A low-noise DC servo motor drives a die-cast, high-inertia aluminum platter with special record mat via a rubber belt, resulting in stable speed and minimal wow and flutter.
• DAMPED PLATTER
  The underside of the platter is covered with strategically-placed elastomer damping material. Not only does this material drastically reduce the platter resonance (the RING when the platter is tapped) but due to the increased mass it also increases rotational inertia, improving speed accuracy. An undamped platter will ring like a bell, and that resonant energy is transferred through the vinyl back to the phono cartridge resulting in distortion.
• SERVO SPEED CONTROL
  A sensor and motor control circuit measures the actual platter speed at the bearing and corrects it instantaneously in a closed-loop feedback system. This technique improves the Model 50’s wow and flutter specification by over 50% and speed accuracy by 66% over the simple belt drive and DC motor.
• PRECISION TONEARM AND CARTRIDGE
  The tonearm is a static-balance, straight-tube design with precision bearings, built-in anti-skate adjustment and removable bayonet-style headshell. A premounted moving-magnet cartridge takes all the guesswork out of setup and assures proper vertical tracking angle, tracking weight and azimuth adjustment right out of the box.
• BUILT-IN PHONO EQUALIZER AMPLIFIER
  Unlike most turntables, the Miracord 50 comes complete with a built-in defeatable phono preamp for correct RIAA equalization. That means you can add LP playback without having to add a costly phono stage to line-level preamps or digital-only systems. Just plug it in, put on a record and enjoy rich LP sound!
• HIGH-TOLERANCE MAIN BEARING ASSEMBLY
  The motor servo sensor for the speed feedback is integrated into an improved main bearing assembly. The platter rests on this bearing, so it takes not only the vertical load of the platter mass plus the record, it also has to resist the torque applied to it via the drive belt and motor pulling laterally against it. This better bearing has lower friction and lower rumble.
• Built-in Phono
  Equalizer Amplifier
• Unlike most turntables, the Miracord 50 comes complete with a built-in defeatable phono preamp for correct RIAA equalization. That means you can add LP playback without having to add a costly phono stage to line-level preamps or digital-only systems. Just plug it in, put on a record and enjoy rich LP sound!
• Precision Tonearm and Cartridge
  Audio-Technica AT91 moving magnet
• The tonearm is a static-balance, straight- tube design with precision bearings, built- in anti-skate adjustment and removable bayonet-style headshell. A premounted moving-magnet cartridge takes all the guesswork out of setup and assures proper vertical tracking angle, tracking weight and azimuth adjustment right out of the box
• Anti-resonant
  Chassis
• Superior isolation is achieved with a chassis designed to minimize the sonic effects of vibration and feedback. A low-noise DC servo motor drives a die-cast, high-inertia aluminum platter with special record mat via a rubber belt, resulting in stable speed and minimal wow and flutter.
• Elac Miracord 50 Turntable Specifications
• TURNTABLE SECTION
  Drive System Belt drive
  Motor DC motor
  Selectable Speeds 33⅓ and 45 pm
  Motor Servo Speed rotation and servo system
  Rotation Speed Varia +/-1%
  Wow and Flutter 0.10%
  Signal-to-Noise Ratio 67 dB or higher (A-weighted)
  Signal-to-Noise Ratio 60 dB or higher (unweighted)
  Platter Aluminum die-cast
  Platter Diameter 12.0 in / 300 mm
  Built-in MM Phonostage
  Precision Tonearm and Cartridge
  Audio-Technica AT91 moving magnet

Δείτε εδώ όλα μας τα προιόντα.

Δείτε προσφορές στο BLOGSPOT μας