Musical Fidelity M3X VINYL

Περιγραφή

Musical Fidelity M3X VINYL

Το M3x ViNYL είναι ένα phono stage, σχεδιασμένο χωρίς πρακτικά όρια. Η συνδεσιμότητα του είναι πολύ εύκολη. Έχετε μια είσοδο και μια έξοδο. Τίποτα δεν μπορεί να υπερφορτώσει την είσοδο ή να περιορίσει την έξοδο του phono stage. Μπορεί να ρυθμιστεί είτε για MM κεφαλή κινητού μαγνήτη είτε για MC κεφαλή κινητού πηνίου σε κάθε πιθανό φορτίο. Πετυχαίνει πολύ υψηλό ηχητικό αποτέλεσμα όπως το M6x ViNYL, αλλά σε ένα φθηνότερο επίπεδο, στην επιτομή του αληθινού high-end audio.

Musical Fidelity M3X VINYL

• Musical Fidelity M3X VINYL – Overview
• The M3x ViNYL is a phono stage, designed to be without any practical limits. Connectivity is straight forward. You have an input and an output. Neither of them can be overloaded at the input or limited in the output driving capacity. It can be set for either MM or MC and exact loading. It offers state-of-the art technical and sonic performance just like the M6x ViNYL, but at a cheaper entry level to the epitome of the true spirit of high-end audio.
• Design Philosophy
  The M3x ViNYL has been switched, just like in its bigger brother the M6x ViNYL, to an entirely discrete circuitry, which results in better technical measurements and better sound. It is equipped with one single-ended input and output. But the important question is: what is so special about discrete circuits?
• Although it is Musical Fidelity’s lowest price amplifier, it embodies our hallmark values of uncoloured, stress-free sound, outstanding technical performance and great value for money.
• The Advantage of Discrete Circuits
  A discrete circuit is composed of electronic components which are disparate, individual devices, also called discrete components. These can be “passive” components, like resistors, capacitors and inductors, as well as “active” components, which in our case are transistors. The opposite to this would be an integrated circuit, which uses operational amplifiers (Op-Amps) in the signal chain. In our industry we employ specialised Op-Amps built for audio applications, which allow us to produce very small and efficient electronics, as well as saving the time of design engineers. However, countless hours of listening tests and years of experience have shown us that even the very best Op-Amps do not tend to be so neutral, natural, dynamic or vivid – all of which are characteristics of the Musical Fidelity “sound”. For that reason, we’re rediscovering our passion for traditional, discrete designs. Where standard phono pre-amplifiers with integrated circuits have a few tens or hundreds of components, discrete designs will employ hundreds or thousands of components by comparison. That makes for an extended design process, but in our opinion results in the best sound for your money.
• Toroidal Power Transformer
  The special audio transformer with low core saturation decreases the level of electromagnetic radiation, which is essential because otherwise any phono amplifier will never be able to work correctly. Together with the distance between transformer and amplification section and the electromagnetic shielding, we are creating an incredibly high signal to noise ratio. If we are working with the few hundreds of microvolts from a phono cartridge, everything is playing its role; every decibel of signal to noise ratio is crucially important. For the first time, we have implemented our new proprietary power supply solution that has zero standby power consumption. Absolutely zero! It is a super green product and we are sure, there isn’t any other product in existence with an ecological standby function like this.
• Split Passive EQ
  Many other phono stages are using a single equalization network in a global feedback loop. By means of an EQ network, the amplified signal from the output of the phono preamp is brought back to the input of the phono preamp. This is the before mentioned feedback loop, and the results, as you can imagine, are not in accordance with the high standards in Musical Fidelity design philosophy. The M3x ViNYL uses split passive equalization in separate amplification stages without global negative feedback loops for its RIAA curve. This is more costly to design and implement but ensures the most accurate representation of the ideal EQ curve. Split passive equalization allows for better impedance matching and lower deviation from the ideal RIAA curve.
• High-Tech Mechanical and Electrical Engineering – Hand Made in the EU
  M3x ViNYL has a steel chassis and a thick, heavy aluminium frontplate, which brings outstanding rigidity to the entire system and at the same time splendid isolation against outside interference. Key factor in keeping signal to noise ratios on the highest possible leveld is the huge distance between power transformer and amplifier section. The quality of the outside chassis finish, which is beyond beautiful, as well as the electronics inside – all wired by hand – is maintained by the highest manufacturing standards which we now achieve by fully switching the production to be entirely Made in the EU!
• Musical Fidelity M3X VINYL In Brief
  MM and MC input
  Exact loading options for any cartridge
  Fully discrete circuit board design
  Special low core saturation toroidal transformer custom designed for phono stage requirements
  Environmental friendly – absolutely zero standby power consumption
  Split Passive RIAA and DECCA EQ
  Heavy aluminium frontplate with steel chassis
  Minimal electromagnetic interference from power supply to phono preamp
  Big chassis design enables huge distance between power transformer and amplifier section
  Made in the EU
• Musical Fidelity M3X VINYL – Specifications
  MM Input
  Frequency response: RIAA or RIAA/IEC ±0 .2dB
  Input sensitivity: 5mV in for 500mV out (at 1 kHz)
  Input impedance: 47KΩ
  Input capacitance: 50-400pF selectable
  Gain: 40 or 46dB with +6dB function
  THD+N: <0.028%
  Signal to noise ratio: 95dB
  Crosstalk: better than 100dB
  MC Input
  Frequency response: RIAA or RIAA/IEC ±0.3dB
  Input sensitivity: 500μV in for 500mV out (at 1 kHz)
  Input impedance: 25Ω to 1,2KΩ selectable
  Gain: 60 or 66dB with +6dB function
  THD+N: <0.28%
  Signal to noise ratio: 80dB
  Crosstalk: better than 90dB
  Output
  1 pair RCA: left and right 500mV nom 10V max
  Input
  1 pair RCA
  Power requirement
  Mains voltages: 230V/115V; AC 50/60Hz
  Consumption: 20 Watts maximum. 0W in standby)
  Weight and Dimensions
  Unit only, unboxed: 6.59 kg
  In shipping carton & inc . accessories: 10.15 kg
  W x H(incl. feet) x D(incl. terminals): 440 x 105 x 390mm
  Standard accessories
  Mains lead: 10 Amp IEC

whathifi

hifinews

hifipig

pursuitperfectsystem

Διαθέσιμο σε μαύρο και ασημί

Δείτε εδώ όλα τα προιόντα μας