MICHELL HR Power Supply The HR Power Supply is a low-noise electronic power source for the DC motors as found on the TecnoDec, GyroDec and Gyro SE turntables. Adding extra stability to the power supply for the motor, the HR features the novel Never-Connected circuit, and has a user-adjustable speed control on its back plate. Fitting is simple – just unplug the motor lead from the existing supply and connect it to the HR. An IEC mains lead comes supplied. Please note that the HR Power Supply is now only available in a black acrylic case.
Click to enlarge
MICHELL TecnoArm 2 The TecnoArm 2 is designed to offer a truly audiophile listening experience at exceptional value for money and easily competes with tonearms at three times the price! Utilising a custom one piece arm tube, the tube is first shot - blasted to change the sonority (ringing tone) of the tube, we then drill 22 holes in the tubes underside to reduce it's mass. The underside of the integral head shell is machined to be perfectly parallel with the bearing position. The tonearm is then assembled using the new ultra-low friction polymer bearings and mounted on a redesigned mounting base. The TecnoArm 2 is wired with our proprietary wiring loom and 99.9999% pure silver litz wire, from cartridge tags to phono plugs, with no internal wiring joints. Image shows the tonearm mounted to an arm plate, arm plate is not included. Our TecnoWeight counter weight allows you to set the tracking force for your chosen cartridge easily and our new VTA/SRA adjuster sets the height of your tonearm, helping you ensure the stylus tracks the vinyl groove at the correct angle. The TecnoArm 2 has been designed to offer a truly audiophile listening experience with exceptional value for money. This is a tonearm that can easily compete with others three times the price!
MICHELL TecnoArm 2 €1,790.00
Back to products
MICHELL Orbe Platter Kit The Orbe Platter Kit offers owners of GyroDecs and Gyro SE’s the opportunity to take their turntables to the next performance level. Taking many of the Orbe’s unique qualities, the Orbe Platter Kit contains the following items: 60mm thick extra heavy impedance-matched platter Screw-down record clamp, compatible with standard and 180g audiophile pressings Replacement threaded record spindle Denso damp, sub chassis dampening material Replacement belt Convex platter retaining nut and ring, to help flatten uneven vinyl Comprehensive fitting instructions are supplied.
MICHELL Orbe Platter Kit €1,190.00
MICHELL AUDIO

MICHELL HR Power Supply

€1,190.00

MICHELL HR Power Supply

MICHELL HR Power SupplyThe HR Power Supply is a low-noise electronic power source for the DC motors as found on the TecnoDec, GyroDec and Gyro SE turntables. Adding extra stability to the power supply for the motor, the HR features the novel Never-Connected circuit, and has a user-adjustable speed control on its back plate. Fitting is simple – just unplug the motor lead from the existing supply and connect it to the HR. An IEC mains lead comes supplied. Please note that the HR Power Supply is now only available in a black acrylic case.

MICHELL HR Power Supply

Διαθέσιμο κατόπιν παραγγελίας

Add to compare
Add to wishlist
Κωδικός προϊόντος: MICHELL HR Power Supply Κατηγορία: Ετικέτες: , ,
Περιγραφή

Περιγραφή

MICHELL HR Power Supply

MICHELL HR Power SupplyThe HR Power Supply is a low-noise electronic power source for the DC motors as found on the TecnoDec, GyroDec and Gyro SE turntables. Adding extra stability to the power supply for the motor, the HR features the novel Never-Connected circuit, and has a user-adjustable speed control on its back plate. Fitting is simple – just unplug the motor lead from the existing supply and connect it to the HR. An IEC mains lead comes supplied. Please note that the HR Power Supply is now only available in a black acrylic case.

MICHELL HR Power Supply

Εξωτερικό τροφοδοτικό Hi-End με ενσωματωμένο ειδικό σύστημα ελέγχου ΝC, βασισμένο στο πρωτοποριακό κύκλωμα Never-Connected

MICHELL HR Power Supply

The HR Power Supply is a low-noise electronic power source for the DC motors as found on the TecnoDec, GyroDec and Gyro SE turntables.
Adding extra stability to the power supply for the motor, the HR features the novel Never-Connected circuit, and has a user-adjustable speed control on its back plate.
Fitting is simple – just unplug the motor lead from the existing supply and connect it to the HR. An IEC mains lead comes supplied.
Please note that the HR Power Supply is now only available in a black acrylic case.

 

 

Δείτε εδώ τα υπόλοιπα προϊόντα μας.

Δείτε προσφορές στο BLOGSPOT μας

 

Επιπλέον πληροφορίες

Επιπλέον πληροφορίες

Brand

MICHELL AUDIO
Αξιολογήσεις (0)

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Μόνο συνδεδεμένοι πελάτες που έχουν αγοράσει αυτό το προϊόν μπορούν να αφήσουν μία αξιολόγηση.

Τρόποι Αποστολής / Παραλαβής

ΤΡΟΠΟΙ ΠΑΡΑΔΟΣΗΣ

  1. Η παράδοση των προϊόντων μετά τη συλλογή τους από την Nexus Acoustics, πραγματοποιείται σε διάστημα 1-3 εργάσιμων ημερών.
  2. Παραλαβή από την έδρα μας κατόπιν επικοινωνίας.
  3. Αποστολή με Courier με επιπλέον χρέωση για παραγγελίες έως 100€ & έως 2,00 kg. και δωρεάν για την Ελλάδα σε μεγαλύτερα ποσά και μικρού όγκου δέματα (έως 2,00 kg)
  4. Οι αποστολές για δυσπρόσιτες περιοχές γίνονται στο πλησιέστερο Γραφείο της συνεργαζόμενης Courier.
  5. Για ογκώδη αντικείμενα (Ηχεία, Ενισχυτές κλπ) η αποστολή γίνεται με Μεταφορική Εταιρεία κατόπιν συνεννόησης και ανάλογα τον προορισμό.

 

> Δείτε περισσότερα σχετικά με τις παραδόσεις

Σχετικά προϊόντα

GOLDNOTE VALORE 425 PLUS Black
Add to compare
Quick view
Add to wishlist

GOLDNOTE VALORE 425 PLUS Black

€1,780.00
Προσθήκη στο καλάθι

GOLDNOTE VALORE 425 PLUS Black

GOLDNOTE VALORE 425 PLUS Black

GOLDNOTE VALORE 425 PLUS Black

MICHELL Gyro SE BLACK
MICHELL Gyro SE BLACK
Add to compare
Quick view
Add to wishlist

MICHELL Gyro SE BLACK

€4,920.00
Προσθήκη στο καλάθι

MICHELL Gyro SE BLACK (χωρίς βραχίονα)

MICHELL GYRO SE BLACK ΕΝΑ GYRODEC ΜΕ ΜΙΚΡΟ ΑΠΟΤΥΠΩΜΑ

Το Gyro SE BLACK είναι παραλλαγή του Gyrodec που προσφέρει σχεδόν πανομοιότυπες επιδόσεις με το μεγαλύτερο αδερφάκι του στο οποίο όμως η πλήρους μεγέθους ακρυλική βάση έχει αντικατασταθεί από ένα άκαμπτο και αδρανές ακρυλικό spyder για τη στήριξη του πλαισίου. Το Gyro SE BLACK είναι το πικάπ με τις μεγαλύτερες πωλήσεις στην ιστορία της Michell που προσφέρει ήχο αναφοράς στην κατηγορία τιμής του χωρίς να καταλαμβάνει πολύ χώρο.

MICHELL Gyro SE BLACK

MICHELL Gyro SE BLACK

MICHELL ORBE The Orbe is Michell's flagship turntable, taking all that was learned from developing the GyroDec to the next level. Delivering a true audiophile listening experience, the Orbe's detail, neutrality and rhythm has to be heard to be believed. 2 levels of isolation, a massive 60mm thick vibration damping platter and the most sophisticated power supply and motor configuration we have ever created, help raise the Orbe to levels of performance that will delight vinyl lovers for years to come.
Add to compare
Quick view
Add to wishlist

MICHELL ORBE

€8,790.00
Επιλογή Αυτό το προϊόν έχει πολλαπλές παραλλαγές. Οι επιλογές μπορούν να επιλεγούν στη σελίδα του προϊόντος

MICHELL ORBE

MICHELL ORBEThe Orbe is Michell's flagship turntable, taking all that was learned from developing the GyroDec to the next level. Delivering a true audiophile listening experience, the Orbe's detail, neutrality and rhythm has to be heard to be believed. 2 levels of isolation, a massive 60mm thick vibration damping platter and the most sophisticated power supply and motor configuration we have ever created, help raise the Orbe to levels of performance that will delight vinyl lovers for years to come.

MICHELL ORBE hi end suspended turntable

REGA RB220
Add to compare
Quick view
Add to wishlist

REGA RB220

,
€379.00
Προσθήκη στο καλάθι

REGA RB220

O RB220 είναι η νεώτερη υλοποίηση ενός από τους δημοφιλέστερους βραχίονες μας ο οποίος εκμεταλεύεται το νέο arm tube και το σύστημα στήριξης τριών σημείων του βραχίονα. Κάθε RB220 συναρμολογείται σχολαστικά στο χέρι, πετυχένωντας εξαιρετικά χαμηλές τριβές και απόδοση υψηλότερη από την κατηγορία τιμής του.

REGA RB220

REGA RB220

REGA RB3000
Add to compare
Quick view
Add to wishlist

REGA RB3000

,
€2,099.00
Προσθήκη στο καλάθι

REGA RB3000

Ο βραχίονας REGA RB3000 είναι γεμάτος με νέα χαρακτηριστικά. Όπως συμβαίνει με όλους τους βραχίονες Rega, κάθε ένας βραχίονας μας είναι σχολαστικά κατασκευασμένος στο χέρι από τεχνικούς υψηλής εξειδίκευσης. Ο REGA RB3000 χρησιμοποιεί βελτιωμένα bearings με το καθένα να επιλέγεται ώστε να ταιριάζει με το spindle τόσο με την εσωτερική όσο και με την εξωτερική διάμετρο. Αυτή είναι μια μέθοδος που αναπτύχθηκε από τη Rega σχεδιασμένη ειδικά για τη βελτιστοποίηση της απόδοσης του RB3000.

REGA RB3000

REGA RB3000

REGA RB880
Add to compare
Quick view
Add to wishlist

REGA RB880

,
€1,099.00
Προσθήκη στο καλάθι

REGA RB880

Ο RB880 είναι το αποτέλεσμα 40 χρόνων εμπειρίας στο σχεδιασμό βραχιόνων. Ο REGA RB880 διαθέτει νέο αλουμινένιο κάθετο περίβλημα ρουλεμάν, επανασχεδιασμένο χιτώνιο και κάθετο άξονα ρουλεμάν (και τα δύο κατασκευασμένα από ανοξείδωτο χάλυβα) για βελτίωση της σταθερότητας και της συνολικής ακαμψίας. Ο προηγμένος σωλήνας του REGA RB880 έχει σχεδιαστεί με έξυπνη ανακατανομή της μάζας, διασφαλίζοντας λιγότερα σημεία πιθανού συντονισμού.

REGA RB880

REGA RB880

Sorane-Tonearm TA-1 Classic looking tonearm, machine-tooled and hand-assembled by skilled Japanese craftsmen. It features a precise detachable headshell and a gimball bearing design for excellent bass and imaging. Sorane/ All handmade and hand assembled by craftsmen Since the company's foundation in 1974, Katsuaki Ishiyama-san has established and accumulated extensive knowhow in the design and development of various tonearms and other analog equipment. Each piece is manufactured through a completely handmade and assembled process, based on his belief that fine-tuning can only be achieved through the precise and sensitive hands of skilled craftsmen. Even though modern technology such as CNC milling machines is used at their plant for basic parts production, they still rely on the expertise of their craftsmen, particularly during the assembly process. This ensures that the numerous parts achieve ideal mechanical surface contact through meticulous hand-tuning and hand-adjustment. Walden High-End Audio Products High-End Audio Brands Tonearms Sorane TA-1 Shared Features Amongst Sorane Tonearms (a) Gimbal-bearing designs for excellent bass, dynamics and imaging, as well as unconditional azimuth stability (the biggest problem for unipivots). (b) Antiskating (c) Detachable headshells to allow quick changes of cartridges, the adoption of various mass headshells (to help change the effective mass of the arms and cartridges), and the ability to mount cartridges in a well lit area, in a safe and convenient manner. (d) Machine-tooled and hand-assembled by skilled Japanese craftsmen. This highly skilled and delicate hand-assembly differentiates Sorane/Abis tonearms from similar mass-produced Japanese tonearms. Standard quality high-volume tonearms are produced by die-casting and semi-automatic assembly line processes to keep production costs low. (e) Skilled hand assembly does not simply mean “combining the constituent parts by hand”. Skilled hand assembly involves measurement, adjustment and hand-fitting to produce optimal interface between machined surfaces. Once completed, the fitment between every part is ideal, satisfying the necessary conditions for vibration-free and noise-free reproduction of analog sound. (f) Most importantly, the key to tonearm quality is highly sensitive and delicate motion, for which the bearings are the determining factor. (g) Concerning the reproduced sound from these models: The designer is confident you will get precise and clean sound, which can only be had from hand-made tonearms, but at a very reasonable price with these arms. (h) In particular, the SA-1.2 will produce rich and tight bass, coming from the extremely rigid rectangular shaped arm-wand. (i) In SA-1.2, two sets of fine radial bearings are installed for both horizontal (set in the bearing stem column in this photo) and vertical (further small bearing at tonearm wand). This assures audiophiles of smooth tonearm function, greater longevity, better consistency, and enhanced ability to track warped vinyl. (j) The same type radial bearing used in the SA-1.2 for horizontal motion is also used for the TA-1 and TA-1L, while a delicate pivot bearing is employed for vertical movement (this is still a bearing but the bearing axis end is cone shaped, and requires careful assembly and adjustment). The right side cone in this photo is inserted into the miniature bearing inner race.
Add to compare
Quick view
Add to wishlist

SORANE TA-1L Tonearm

,
€2,550.00
Προσθήκη στο καλάθι

SORANE TA-1L Tonearm

SORANE TA-1L Tonearm Gimbal-type bearing design 12 inch S-Shaped tonearm for excellent bass, dynamics and imaging A successful tonearm must have the sensitivity and stability to retrieve low-level signals and the quality of the bearings (such as used in the TA tonearms) is paramount. Whilst tonearm mass and cartridge compliance set the low frequency resonance point, high quality bearings must be used that allow the arm to follow the advance of the groove, to navigate the vinyl groove without grabbing/resistance/noise generation.

SORANE TA-1L Tonearm

Technics SL-1200GR
Add to compare
Quick view
Add to wishlist

Technics SL-1200GR

€1,800.00
Προσθήκη στο καλάθι

Technics SL-1200GR

Technics SL-1200GR

Technics SL-1200GR

Πικάπ Direct Drive Technics SL-1200GR, το πικάπ άμεσης οδήγησης SL-1200GR βασίζεται στην τεχνολογία του SL-1200G, η οποία έχει γίνει σημείο αναφοράς στα πικάπ direct drive.