COS D10 V4

Περιγραφή

COS D10 V4

Ο ψηφιοαναλογικός μετατροπέας  COS D10 είναι ταυτόχρονα ψ/α μετατροπέας – DAC ενισχυτής ακουστικών και προενισχυτής! Μια συσκευή εξαιρετικά κατασκευασμένη και ευέλικτη η οποία κατόπιν παραγγελίας δέχεται και το SPH2 MC/MM RIAA – phono stage με όλες τις απαραίτητες ρυθμίσεις κέρδους και φορτίου κεφαλής  ή και streamer το οποίο ενσύρματο ή ασύρματο το οποίο διαχειρίζεται αρχεία από TiDAL, Spotify, Deezer, and Qobuz.

C O S　D 1 0
D10 is a dream component for your beloved sonic pleasure. It is a DAC, a pre-amp, and a headphone amp, well built with streaming capability. Yes, the same spacious, supple and dynamically powerful sound that COS products have been offering. D10 is also a phono amp, one that delivers from your preferred vinyls luscious vibes.

• COS ALGORITHM, BUFFER and RE-CLOCKING
  COS’s proprietary algorithm with a linear-phase delay FIR filter can up-sample original data to 176.4K or 192K. D10 stores digital data in a one-second buffer before converting to analog signals, under the coordination of a crystal oscillator with a jitter precision less than 1ps and a dedicated re-clocking circuitry.
  STREAMING (optional)
  Stable and quality streaming is available, with or without a wire, for TiDAL, Spotify, Deezer, and Qobuz. Setup is easy with iOS and Android applications.
  PHONO-AMPLIFIER (optional)
  There are 5 loading resistors and 3 loading capacitors, all selectable, to accommodate phono cartridges of your choice. Other features include JFET input stage, on-board low-noise linear regulator, and handpicked components for RIAA curve matching and zero capacitor between audio signal paths. Extremely low in noise and distortion.
  TWO-LAYER HOUSING
  D10 has an NCT internal chassis and an aluminum exterior. This design provides a fortified frame that make possible lowered noise and minimized interference, plus a fine outlook.

1. COS D10 V4 SPECIFICATIONS preamp

   COS D1029
   Analog Input Balanced X 1, Unbalanced X 1
   Analog Output Balanced X 1, Unbalanced X 1
   Residual Noise < 2uV(-114dBV) (20Hz~20KHz, non-weighted, input terminated)
   Input Overload 16V (balanced), 8V (unbalanced)
   Input Impedance 100Kohm
   Output Impedance 200 ohm(balanced), 100ohm (unbalanced)
   Maximum Output 16V (balanced), 8V (unbalanced)
   Frequency Response +-0.1dB/20Hz~20KHz
   THD+N < 0.001% (-100dB) (20Hz~20KHz non-weighted)
   Signal To Noise Ratio > 110dB/20Hz~20KHz non-weighted
   Crosstalk < -120dB
   Volume precision resistor array, 140 steps by 0.5dB/step, -64db to +6dB
   Headphone Amplifier
   audio jack X 2 (unbalanced X 2)
   XLR-3 X 2 (balanced X 1)
   XLR-4 X 1 (balanced X 1)

2. COS D10 V4 SPECIFICATIONS – PHONO AMPLIFIER

   COS D1030
   Gain 40, 50 or 60dB
   Input Resistance 47Kohm to 10ohm
   Input Capacitance 0 to 750pF
   RIAA response <+-0.2dB/20Hz~20KHz
   Residual Noise <30uV (input shorted, 40dB gain, 20Hz~20KHz)
   <300uV (input shorted, 60dB gain, 20Hz~20KHz)
   THD+N < -90dB (40dB gain,470ohm load, 1KHz, 2Vrms output)
   < -70dB (60dB gain,470ohm load, 1KHz, 2Vrms output)

3. COS D10 V4 SPECIFICATIONS – DAC

   COS D1031
   Digital Inputs
   USB X 1, Asynchronous Audio Class 2.0
   SPDIF BNC X 1
   AES XLR X 1
   TosLink X 1
   I2S X 1 (HDMI, differential)
   Sampling Rate
   PCM, up to 192Ksps, 24 bits
   DSD, up to DSD256 (USB), DSD64 (all other inputs)
   Frequency Response +0dB, -0.5dB/20Hz ~ 20KHz
   Full Scale Output 2V (unbalanced), 4V (balanced)
   THD+N < 0.001% (-100dB) (192Ksps, 24-bit, 20Hz~20KHz, A-
   weighted)
   Signal To Noise ratio > 110dB, 24-bit, 20Hz~20KHz, A-weighted
   DAC 24-bit DAC X 2, up to 192Ksps, 24-bit
   Digital Filter COS proprietary, Linear phase delay
   Audio clock jitter < 1ps

O

COS D10 V4 μπορεί (Optional) να δεχτεί 

STREAMING Module το οποίο κοστίζει επιπλέον της βασικής τιμής 1100 ευρώ 
PHONO Module το οποίο κοστίζει επιπλέον της βασικής τιμής 870 ευρώ 

Δείτε προσφορές στο BLOGSPOT μας

Δείτε εδώ όλα τα προιόντα μας

COS D10 V4